HPE ProLiant DL580 Gen10 Server
HPE ProLiant DL580 Gen10 Server

HPE ProLiant DL580 Gen10 Server

سرور DL580 قویترین قدرت پردازشی و بیشترین مقدار حافضه رم را پشتیبانی میکند به صورتی که این سرور پرقدرت ترین سرور نسل دهم شرکت اچ پی هستش. این سرور . . .

 

شروع قیمت از 4.300.000.000 ریال
محصولات مشابه:
HPE ProLiant DL580 Gen10 Server

سرور DL580 قویترین قدرت پردازشی و بیشترین مقدار حافضه رم را پشتیبانی میکند به صورتی که این سرور پرقدرت ترین سرور نسل دهم شرکت اچ پی هستش.

این سرور قادر به استفاده همزمان چهار عدد پردازنده اسکیلبل Intel® Xeon® Scalable را دارد که میتواند تا 112 هسته پردازشی بصورت فیزیکی و 224 هسته مجازی داشته باشد .

این سرور با 48 درگاه رم که به ازای هر پردازنده 12 عدد تعبیه شده است قابلیت ساپورت 6 ترابایت رم DDR4 با فرکانس 2666 مگاهرتز با استفاده از رم های ECC Reg و لود ردیوس Load Reduced دارد که البته به نسبت هر پردازنده قابلیت حجم رم متفاوت خواهد بود .

این سرور تا 16 عدد جایگاه Pci-e x16 دارد که میتوان تعداد زیادی کارت های مختفل در آن نصب کرد همچنین از دیگر تفاوت های عمده ای که نسبت به مدل قبل خود یعنی DL580 G9 داشه تعداد جای هارد آن است که در سری جی 10 امکان نصب 48 عدد هارد 2.5" را فراهم کرده که با داشتن این سرور دیگر نیاز به یک استوریج DAS نخواد داشت و خود میتواند تا حدودی نیاز های ذخیره سازی را براورده کند.

ارتباط با این سرور بصورت کاملا ساده و حرفه ای طراحی شده بصورتی که با استفاده از چیپست iLO 5 دسترسی کامل را از طریق وب بیس به سرور DL580 G10 فراهم کرده بطوری که امکان گزارش از فعالیت و نمایش خروجی گرافیک را به آسانی از وب میتوانید مشاهده کنید .

در این سرور از کلیه کارت های شبکه 1GbE تا 25GbE پشتیبانی میکند که به نسبت هر نوع استفاده میتواند متغیر باشد

ویژگی های سیستم :
Processor Intel® Xeon® Scalable processors Processor number 4 or 3 or 2 or 1 Processor core available 28 or 26 or 24 or 22 or 20 or 18 or 16 or 14 or 12 or 10 or 8 or 6 or 4, per processor, depending on model Processor cache 13.75 MB L3 or 16.50 MB L3 or 19.25 MB L3 or 22.00 MB L3 or 24.75 MB L3 or 27.50 MB L3 or 30.25 MB L3 or 33.00 MB L3 or 35.75 MB L3 or 38.50 MB L3, per processor, depending on model Processor speed 3.6 GHz, maximum depending on processor Form factor
حافظه :
6.0 TB maximum Memory slots 48 DIMM slots maximum Memory type HPE DDR4 SmartMemory
ذخیره سازی :
کارت های کنترل :
Network controller Optional FlexibleLOM Storage controller HPE Smart Array S100i or HPE Smart Array Controllers, depending on model
ابعاد و وزن :
Weight 114 lb Product dimensions (H x W x D) 6.88 x 17.54 x 29.60 in
مدیریت سرور :

 

QuickSpecs                                                                               HPE ProLiant DL580 Gen10 Server

Overview

HPE ProLiant DL580 Gen10 Server
The HPE ProLiant DL580 Gen10 Server is a high-density, four-socket server with high performance, scalability and
reliability, all in a 4U chassis. Supporting the latest Intel® Xeon® Scalable processors, the HPE ProLiant DL580
Gen10 Server offers greater processing power, up to 6 TB of faster memory, IO of up to sixteen PCIe 3.0 slots,
plus the intelligence and simplicity of automated management with HPE OneView and HPE iLO 5.
The HPE ProLiant DL580 Gen10 Server is the ideal server for business critical workloads, virtualization, server
consolidation, database, business processing, graphics intensive and general 4P data-intensive applications
where the right performance is paramount.




Front View - DL580 Gen10
1.   Quick removal access panel                          2.     Box 1 (8 SFF, 6 SFF+2 NVMe or 8 NVMe (supports
                                                                only 4 NVMe drives) SSD optional)
3.    Box 2 (8 SFF, 6 SFF+2 NVMe or 8 NVMe PCIe 4.              Box 3 (8 SFF, 6 SFF+2 NVMe or 8 NVMe PCIe SSD
                                                                optional)
      SSD optional)
      Front USB 3.0 port                        6.              Power On/Standby button and system power LED
5.
                                                                button
7.    Health LED                                         8.     NIC status
9.    UID button                                         10.    iLO Front Service Port (not available with SID)
11.   Front USB 3.0 port                                 12.    Serial label pull tag
13.   Box 6 (8 SFF)                                      14.    Box 5 (8 SFF)
15.   Box 4 (8 SFF or Universal Media bay)               16.    Optional 2 SFF HDD, requires optional Universal
                                                                Media bay


                                    DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                             Page 1
QuickSpecs                                                                     HPE ProLiant DL580 Gen10 Server

Overview
17.   Optional front display port (via Universal Media   18.   Optional USB 2.0 (via Universal Media Bay)
      Bay)
19.   Optical Drive (Optional)




Rear View - DL580 Gen10
1. PCIe Slots (Slots 1-7 top to bottom), requires primary      2. PCIe Slots (Slots 8-14 top to bottom), requires
   riser                                                          secondary riser (includes tertiary riser)

3. PCIe Slots (Slots 15-16 top to bottom), requires tertiary 4. Power supply Power connection (max. 4)
    riser (included with secondary riser)
5. Power supply Power LED (max. 4)                           6. HPE Flexible Slot Power Supply, 800W PS
                                                                 shown
                                                                 (max. 4)
7. Serial connector                                          8. Dedicated iLO connector
9. VGA (video) connector                                     10. USB connectors 2.0 (2)
11. USB connectors 3.0 (2)                                   12. Unit ID LED
13. FlexibleLOM ports (Port 1 on right side)




                                  DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                          Page 2
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Overview




Internal View: DL580 Gen10 with upper CPU mezzanine tray
1. Left connector used for DL580 4-port NVMe Mezzanine 2. DDR4 DIMM slots. Shown fully populated in 24
    card (Daughter card)                                        slots (12 per processor)
3. Upper CPU Mezzanine Board Kit                            4. Optional secondary PCIe riser (includes
                                                                tertiary riser)
5. Primary PCIe riser                                       6. Air baffle
7. DDR4 DIMM slots on CPU board kit. Shown fully            8. 2 Processors (under the air baffle)
    populated in 24 slots (12 per processor) under the air
    baffle
9. Fan cage shown with 12 standard Hot-plug fans            10. (Under) Max. 4 Hot Plug redundant HPE Flexible
                                                                Slot Power supplies
11. Optional Tertiary riser (included with secondary riser) 12. Handle for removing upper CPU Mezzanine
                                                                Board Kit
13. 2 Processors, heatsink showing on upper CPU
    mezzanine board kit


What's New
     HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features
     New HPE Smart Array P824i-p MR Gen10 (24 Internal Lanes/4GB Cache/CacheCade) 12G SAS PCIe
     Controller
     New Dual SATA 6G RI/MU M.2 - UFF to SFF SCM SSD
     New 375GB NVMe WI drive
     New 750GB PCIE accelerator




                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 3
QuickSpecs                                                          HPE ProLiant DL580 Gen10 Server

Platform Information

Platform Information
   Form Factor         4U Rack Form Factor
                       Entry, Base and Performance pre-configured models ship with Gen10 Rail Kits
                       and Cable Management Assembly

   Chassis Types       48 SFF with optional Universal Media Bay
                       NOTE: The Universal Media Bay (872267-B21) is not available with the 48
                       SFF front end, and can only be populated in Box 4.
                       NOTE: All pre-configured models come with embedded software RAID support
                       for 10 SATA drives. Optional HPE Smart Array Controllers can be added.

   System Fans         12 Hot Plug Fans (with N+1 redundancy)
                       NOTE: 12 hot plug fans are shipped as standard.




                       DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                     Page 4
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Standard Features

Processors
One, two, three or four of the following depending on model.
NOTE: For more information regarding Intel Xeon processors, please see thefollowing
http://www.intel.com/xeon.

                                                                                                  Memory
                               CPU                   L3                                DDR4
    Intel Xeon Models                    Cores                 Power          UPI                   per
                            Frequency               Cache                              MT/s
                                                                                                  socket
 Platinum Processors
                                                                           3 @ 10.4
 Platinum 8180M Processor     2.5 GHz       28     38.50 MB     205W         GT/s     2666 MT/s   1.5 TB
                                                                           3 @ 10.4
 Platinum 8180 Processor      2.5 GHz       28     38.50 MB     205W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8176M Processor     2.1 GHz       28     38.50 MB     165W         GT/s     2666 MT/s   1.5 TB
                                                                           3 @ 10.4
 Platinum 8176 Processor      2.1 GHz       28     38.50 MB     165W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8170M Processor     2.1 GHz       26     35.75 MB     165W         GT/s     2666 MT/s   1.5 TB
                                                                           3 @ 10.4
 Platinum 8170 Processor      2.1 GHz       26     35.75 MB     165W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8168 Processor      2.7 GHz       24     33.00 MB     205W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8165 Processor      2.3 GHz       24     33.00 MB     205W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8164 Processor      2.0 GHz       26     35.75 MB     150W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8160M Processor     2.1 GHz       24     33.00 MB     150W         GT/s     2666 MT/s   1.5 TB
                                                                           3 @ 10.4
 Platinum 8160 Processor      2.1 GHz       24     33.00 MB     150W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8158 Processor      3.0 GHz       12     24.75 MB     150W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8156 Processor      3.6 GHz       4      16.50 MB     105W         GT/s     2666 MT/s   768 GB
                                                                           3 @ 10.4
 Platinum 8153 Processor      2.0 GHz       16     22.00 MB     125W         GT/s     2666 MT/s   768 GB
 Gold Processors
 Gold 6154 Processor          3.0 GHz       18     24.75 MB     200W       3 @ 10.4   2666 MT/s
                                                                             GT/s                 768 GB
 Gold 6152 Processor          2.1 GHz       22     30.25 MB     140W       3 @ 10.4   2666 MT/s   768 GB
                                                                             GT/s
 Gold 6150 Processor          2.7 GHz       18     24.75 MB     165W       3 @ 10.4   2666 MT/s   768 GB
                                                                             GT/s
 Gold 6148 Processor          2.4 GHz       20     27.50 MB     150W       3 @ 10.4   2666 MT/s   768 GB
                                                                             GT/s
 Gold 6146 Processor          3.2 GHz       12     27.45 MB     165W       3 @ 10.4   2666 MT/s   768 GB
                                                                             GT/s



                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                      Page 5
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Standard Features
 Gold 6144 Processor           3.5 GHz       8      27.45 MB     150W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 6143 Processor           2.8 GHz       16     22.00 MB     205W       3 @ 10.4    2666 MT/s    768GB
                                                                              GT/s
 Gold 6142M Processor          2.6 GHz       16     22.00 MB     150W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   1.5 TB
 Gold 6142 Processor           2.6 GHz       16     22.00 MB     150W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 6140M Processor          2.3 GHz       18     24.75 MB     140W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   1.5 TB
 Gold 6140 Processor           2.3 GHz       18     24.75 MB     140W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 6138 Processor           2.0 GHz       20     27.50 MB     125W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 6136 Processor           3.0 GHz       12     24.75 MB     150W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 6134M Processor          3.2 GHz       8      24.75 MB     130W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   1.5 TB
 Gold 6134 Processor           3.2 GHz       8      24.75 MB     130W       3 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 6132 Processor           2.6 GHz       14     19.25 MB     140W       3 @ 10.4    2666 MT/s    768 GB
                                                                              GT/s
 Gold 6130 Processor           2.1 GHz       16     22.00 MB     125W       3 @ 10.4    2666 MT/s    768 GB
                                                                              GT/s
 Gold 6128 Processor           3.4 GHz       6      19.25 MB     115W       3 @ 10.4    2666 MT/s    768 GB
                                                                              GT/s
 Gold 6126 Processor           2.6 GHz       12     19.25 MB     125W       3 @ 10.4    2666 MT/s    768 GB
                                                                              GT/s
 Gold 5122 Processor           3.6 GHz       4      16.50 MB     105W       2 @ 10.4    2666 MT/s
                                                                              GT/s                   768 GB
 Gold 5120 Processor           2.2 GHz       14     19.25 MB     105W       2 @ 10.4    2400 MT/s
                                                                              GT/s                   768 GB
 Gold 5118 Processor           2.3 GHz       12     16.50 MB     105W       2 @ 10.4    2400 MT/s
                                                                              GT/s                   768 GB
 Gold 5115 Processor           2.4 GHz       10     13.75 MB     85W        2 @ 10.4    2400 MT/s
                                                                              GT/s                   768 GB
NOTE: Platinum 8165 processor and Gold 6143 processors support core boosting technology
NOTE: Platinum - 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI, 8S - 3UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2666 MT/
768 GB memory capacity (1.5 TB on select skus with the M suffix), Intel Turbo Boost Technology, Intel Hyper-Threading
Technology
Intel AVX-512 (2x 512-bit FMA), 48 lanes PCIe 3.0, advanced RAS.
NOTE: Gold - 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI @ 10.4 GT/s, 6-Channel DDR4 @ 2400 MHz (SKU
5122=supports 2666), 768 GB memory capacity (1.5 TB on select skus with the M suffix), Intel Turbo Boost Technology,
Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA) (SKU 5122 supports 2x 512 bit FMA), 48 lanes PCIe 3.0,
advanced RAS.
NOTE: Processors with 130W or higher will ship with the High Performance heat sink plus SKUs 8156, 6128, 5122 as n
below. All other will processors will ship with the Standard heat sink.
NOTE: 61xx and 81xx processors support 3 UPI links and all processors are connected in a cross bar configuration with
each processor connected to another directly in a four processor system. 51xx processors support 2 UPI links only and
processors are connected in a ring configuration with processors 1, 3 and 2, 4 not connected directly in a four processo
system.

                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                         Page 6
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Standard Features
NOTE: 3 processor configurations are not supported for 51xx Gold processors.


Chipset
  Intel C621 Chipset
  NOTE: For more information regarding Intel® chipsets, please see the following URL:
  http://www.intel.com/products/server/chipsets/


On System Management Chipset
  HPE iLO 5 ASIC
  NOTE: Read and learn more in the iLO QuickSpecs.


Memory
  One of the following depending on model
  Type:                              SmartMemory
                                     Registered (RDIMM), Load Reduced (LRDIMM)
  DIMM Slots Available                                                12 DIMM slots per processor, 6 channels per
                                     48
                                                                      processor, 2 DIMMs per channel
  Maximum capacity (LRDIMM)          6 TB                             48 x 128 GB LRDIMM @ 2666 MT/s
  Maximum capacity (RDIMM)           1.5 TB                           48 x 32 GB RDIMM @ 2666 MT/s
  Maximum capacity (NVDIMM)          384 GB                           24 x 16 GB NVDIMM @ 2666 MT/s
  NOTE: Mixing of RDIMM and LRDIMM memory is not supported.
  NOTE: Memory speed depends on the processor selected.
  NOTE: Intel memory processors (with suffix M) are needed for supporting 1.5TB memory per processor.
  NOTE: Maximum of 6 NVDIMMs are supported per processor.


Memory Protection
  For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature.


Expansion Slots
Primary 6-slot Expansion Slots            Technology           Bus/Connector          Form Factor/Connector           Notes
Riser                #                                             Width
(Optional)           2                      PCIe 3.0                x16                Full length/full height        Proc 3
872336-B21           3                      PCIe 3.0                 x8                Full length/full height        Proc 3
                     4                      PCIe 3.0                x16                Full length/full height        Proc 3
                     5                      PCIe 3.0                 x8                 ¾ length/full height          Proc 1
                     6                      PCIe 3.0                 x8                 ¾ length/full height          Proc 1
                     7                      PCIe 3.0                 x8                 ¾ length/full height          Proc 1
                  None (J4)                  NVMe                    x8                       Slimline                Proc 1
                  None (J3)                  NVMe                    x8                       Slimline                Proc 3

Primary 7-slot    Expansion Slots         Technology           Bus/Connector          Form Factor/Connector           Notes


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                              Page 7
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Standard Features
Riser                 (Primary/                                      Width
(Optional)          Secondary) #
878214-B21                1               PCIe 3.0                     x8             Full length/full height        Proc 3
                          2               PCIe 3.0                    x16             Full length/full height        Proc 3
                          3               PCIe 3.0                     x8             Full length/full height        Proc 3
                          4               PCIe 3.0                    x16             Full length/full height        Proc 3
                          5               PCIe 3.0                     x8              ¾ length/full height          Proc 1
                          6               PCIe 3.0                    x16              ¾ length/full height          Proc 1
                          7               PCIe 3.0                     x8              ¾ length/full height          Proc 1

Secondary and Expansion Slots          Technology            Bus/Connector          Form Factor/Connector            Notes
Tertiary 8-slot      #                                           Width
Riser                9                    PCIe 3.0                x16                 Full length/full height        Proc 4
(Optional)          10                    PCIe 3.0                 x8                 Full length/full height        Proc 4
872338-B21
                    11                    PCIe 3.0                x16                 Full length/full height        Proc 4
                    12                    PCIe 3.0                 x8                  ¾ length/full height          Proc 2
                    13                    PCIe 3.0                 x8                  ¾ length/full height          Proc 2
                    14                    PCIe 3.0                 x8                  ¾ length/full height          Proc 2
                    15                    PCIe 3.0                 x8                  ¾ length/full height          Proc 2
                    16                    PCIe 3.0                 x8                  ¾ length/full height          Proc 2
                 None (J4)                 NVMe                    x8                        Slimline                Proc 2
                 None (J3)                 NVMe                    x8                        Slimline                Proc 4

Secondary and Expansion Slots          Technology            Bus/Connector          Form Factor/Connector            Notes
Tertiary 9-slot   (Primary/                                      Width
Riser           Secondary) #
(Optional)             8                  PCIe 3.0                     x8             Full length/full height        Proc 4
872340-B21             9                  PCIe 3.0                    x16             Full length/full height        Proc 4
                      10                  PCIe 3.0                     x8             Full length/full height        Proc 4
                      11                  PCIe 3.0                    x16             Full length/full height        Proc 4
                      12                  PCIe 3.0                     x8              ¾ length/full height          Proc 2
                      13                  PCIe 3.0                    x16              ¾ length/full height          Proc 2
                      14                  PCIe 3.0                     x8              ¾ length/full height          Proc 2
                      15                  PCIe 3.0                     x8              ¾ length/full height          Proc 2
                      16                  PCIe 3.0                     x8              ¾ length/full height          Proc 2



Primary NVMe         Expansion        Technology         Bus/Connector              Form                  Notes
Slimline Riser          Slots                                Width            Factor/Connector
(Optional)           (Primary) #
878360-B21            None (J4)           NVMe                  x8                  Slimline              Proc 1
(includes the 4-port  None (J5)           NVMe                  x8                  Slimline              Proc 1
NVMe Mezzanine

                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                               Page 8
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Standard Features
NVMe Mezzanine
                        None (J6)         NVMe                  x8                  Slimline         Proc 1
card)
                        None (J8)         NVMe                  x8                  Slimline         Proc 1

4-port NVMe             Expansion         Technology      Bus/Connector              Form                 Notes
Mezzanine card            Slots #                             Width           Factor/Connector
(included with             None              NVMe               x8                  Slimline              Proc 3
878360-B21)                None              NVMe               x8                  Slimline              Proc 3
                           None              NVMe               x8                  Slimline              Proc 3
                           None              NVMe               x8                  Slimline              Proc 3
  NOTE: A minimum of 1 primary riser needs to be ordered.
  NOTE: The secondary riser is shipped with the tertiary riser and can be installed only after the primary riser
  has been installed. The tertiary riser cannot be ordered separately.
  NOTE: Slot availability is dependent on the processor installed. Please refer the above table carefully to
  make decisions on adding PCIe cards.
  NOTE: The expansion slots at the back are numbered in ascending order from top to bottom and from left to
  right.
  NOTE: The optional Slimline NVMe riser (878360-B21) supports a maximum of 16 NVMe drives and includes a
  primary 4-port riser and a 4-port NVMe mezzanine card. The 4-port NVMe mezzanine card installs on top of the
  HPE DL5x0 Gen10 CPU Mezzanine Board Kit (872222-B21) and requires three or four processor configuration.
  NOTE: Each NVMe port (slot) supports 2 NVMe drives.
  NOTE: A maximum of 1 primary, 1 secondary (includes tertiary) riser can be installed in one server.
  NOTE: Internal storage controllers and SAS expanders are supported only in the primary and tertiary risers.
  Not supported in the secondary riser.


Network Controller
   The HPE ProLiant DL580 Gen10 servers offer a flexible network technology - FlexibleLOMs, which offers
   customers a choice of 1 Gb, 10 Gb, 25 Gb or 10 Gb base-T Ethernet or converged networking in their embedded
   adapter. A range of NIC cards are also available to enhance networking capabilities.
   NOTE: For additional details see the Networking Section of this document.
   Model                        Adapter
   Entry Model                  HPE Ethernet 1Gb 4-port 331FLR Adapter
   Base Model                   HPE FlexFabric 10Gb 2-port 535FLR-T Adapter
   Performance Model            HPE FlexFabric 10/25 Gb 2-port 640FLR-SFP28 Adapter


Storage Controllers
  The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more
  detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers
  Data Sheet.
  Software RAID                   HPE Smart Array S100i SR Gen10 SW RAID
  NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an
  additional controller will be needed, and for CTO orders please also select the Legacy mode settings part,
  758959-B22.
  NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. For enabling, please
  select HPE FIO Enable Smart Array SW RAID (784308-B21).


                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 9
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Standard Features
   Essential RAID               HPE Smart Array E208i-p SR Gen10 Controller
                                HPE Smart Array E208e-p SR Gen10 Controller
   Performance RAID             HPE Smart Array P408i-p SR Gen10 Controller
                                HPE Smart Array P408e-p SR Gen10 Controller
                                HPE Smart Array P824i-p MR Gen10 Controller


Internal Storage Devices
   One of the following depending on model
   Optical Drive                Optional: DVD-ROM, DVD-RW
   Hard Drives                  None ship standard
   Hard Drive Bays              8 hot plug SFF SAS/SATA HDD Bay in Entry, Base and Performance Models.
                                Optional 8 NVMe SSD Express Bay Enablement Kit
                                Optional Premium 6SFF and 2 NVMe or 8SFF Bay Kit
Recommended NVMe                The DL580Gen10 offers a high degree of flexibility when configuring server solutions
                                utilizing NVMe high performance SSD drives.This flexibility can make
drive configurations
                                configuring the server a challenge and could result in non-optimal and partially
                                connected NVMe configurations where not all NVMe drive bays are functional.

                                HPE strongly encourages customers to choose an NVMe configuration based
                                on processor quantity and desired maximum NVMe drive needs. Configuring
                                the server based on the recommendations presented in the table below will help
                                guide customers to solutions optimized for NVMe drives and PCIe slot counts.

 Maximum                                                           Drive Kit NVMe 8 Drive Kit     Drive Kit
   NVMe      Proc                                                   SSD Express Premium 6SFF UMB 2SFF
                                 Riser Configuration
   Drives    Qty                                                   Bay     (878362- and 2 NVMe Premium HDD
 supported                                                               B21)      (878364-B21) (880121-B21)
      2        1            Primary 6-slot Riser (872336-B21)                                         1
      2        1            Primary 6-slot Riser (872336-B21)                           1
      2        2            Primary 6-slot Riser (872336-B21)                           1
      2        2            Primary 6-slot Riser (872336-B21)                                         1
                    Primary 6-slot Riser (872336-B21) + Secondary and
     2         2                                                                                      1
                            Tertiary 9-slot Riser (872340-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
     2         2                                                                       1
                            Tertiary 9-slot Riser (872340-B21)
                    Primary 7-slot Riser (878214-B21) + Secondary and
     2         2                                                                                      1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 7-slot Riser (878214-B21) + Secondary and
     2         2                                                                       1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
     4         2                                                                       1              1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
     4         2                                                                       2
                            Tertiary 8-slot Riser (872338-B21)
     2         3            Primary 6-slot Riser (872336-B21)                                         1




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 10
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Standard Features
                    Primary 7-slot Riser (878214-B21) + Secondary and
    2         3                                                                                         1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 7-slot Riser (878214-B21) + Secondary and
    2         3                                                                         1
                            Tertiary 8-slot Riser (872338-B21)
    4         3             Primary 6-slot Riser (872336-B21)                           2
    4         3             Primary 6-slot Riser (872336-B21)                           1               1
    4         3             Primary 6-slot Riser (872336-B21)             1
  NOTE: Partial configuration. Drive bays 5-8 are not functional. Add 4th processor and Secondary / Tertiary 8-
  slot Riser (872338-B21) to enable all 8 drive bays or change primary riser to NVMe Slimline Riser (878360-B21;
  includes the 4-port NVMe Mezzanine card) + Secondary and Tertiary 9-slot Riser (872340-B21) to enable 16
  drive configuration.
                    Primary 6-slot Riser (872336-B21) + Secondary and
    4         3                                                                         2
                            Tertiary 9-slot Riser (872340-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
    4         3                                                                         1               1
                            Tertiary 9-slot Riser (872340-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
    6         3                                                           1
                            Tertiary 8-slot Riser (872338-B21)
  NOTE: Partial configuration. Drive bays 7-8 are not functional. Add Processor 4 to enable all 8 drive bays.
                    Primary 6-slot Riser (872336-B21) + Secondary and
    6         3                                                                         3
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
    6         3                                                                         2               1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary NVMe Slimline Riser (878360-B21; includes
    16        3     the 4-port NVMe Mezzanine card) + Secondary and       2
                            Tertiary 8-slot Riser (872338-B21)
                    Primary NVMe Slimline Riser (878360-B21; includes
    16        3     the 4-port NVMe Mezzanine card) + Secondary and       2
                            Tertiary 9-slot Riser (872340-B21)
                    Primary NVMe Slimline Riser (878360-B21; includes
    18        3     the 4-port NVMe Mezzanine card) + Secondary and       2                             1
                            Tertiary 8-slot Riser (872338-B21)
    2         4             Primary 6-slot Riser (872336-B21)                                           1
                    Primary 7-slot Riser (878214-B21) + Secondary and
    2         4                                                                         1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 7-slot Riser (878214-B21) + Secondary and
    2         4                                                                                         1
                            Tertiary 8-slot Riser (872338-B21)
    4         4             Primary 6-slot Riser (872336-B21)                           2
    4         4             Primary 6-slot Riser (872336-B21)                           1               1
                    Primary 6-slot Riser (872336-B21) + Secondary and
    4         4                                                                         2
                            Tertiary 9-slot Riser (872340-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
    4         4                                                                         1               1
                            Tertiary 9-slot Riser (872340-B21)
                    Primary 7-slot Riser (878214-B21) + Secondary and
    4         4                                                                         2
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 7-slot Riser (878214-B21) + Secondary and
    4         4                                                                         1               1
                            Tertiary 8-slot Riser (872338-B21)



                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                         Page 11
QuickSpecs                                                                      HPE ProLiant DL580 Gen10 Server

Standard Features
                    Primary 6-slot Riser (872336-B21) + Secondary and
     6        4                                                                          3
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
     8        4                                                             1
                            Tertiary 8-slot Riser (872338-B21)
                    Primary 6-slot Riser (872336-B21) + Secondary and
     8        4                                                                          3            1
                            Tertiary 8-slot Riser (872338-B21)
                     Primary NVMe Slimline Riser (878360-B21; includes
                                      the 4-port NVMe
    16        4                                                             2
                    Mezzanine card) + Secondary and Tertiary 9-slot Riser
                                       (872340-B21)
                     Primary NVMe Slimline Riser (878360-B21; includes
    18        4      the 4-port NVMe Mezzanine card) + Secondary and        2                         1
                             Tertiary 8-slot Riser (872338-B21)
                     Primary NVMe Slimline Riser (878360-B21; includes
    20        4      the 4-port NVMe Mezzanine card) + Secondary and        3
                             Tertiary 8-slot Riser (872338-B21)
  NOTE: Partial configuration. Maximum number of NVME drives supported. 8 Drive SFF NVME in Box 1 will
  only support drives 1-4. Drive bays 5-8 are not functional.

   NOTE: Maximum number of NVMe drives supported depends on a combimnation of processor, box, drive bay
   and riser. Please refer the above table carefully before creating configurations.
   NOTE: The table is a list of recommended configurations.
   NOTE: The maximum drive count listed for each configuration cannot be exceeded.
   NOTE: Box 1 is populated by 8 SFF SAS/SATA bay (878366-B21) and shipped as default without any drives.
   NOTE: The 8 NVMe drive option (878362-B21) can only placed in Box 1, 2 and 3. When the 8 NVMe drive option is
   placed in Box 1, only the first 4 NVMe (left to right) drives can be populated.
   NOTE: The 6 SFF plus 2 NVMe drive option (878364-B21) can only placed in Box 1, 2 and 3.
   NOTE: The Universal Media Bay (872267-B21) is not available with the 48 SFF front end, and can only be populated
   in Box 4. The media bay can support 2 NVMe via the optional 2 SFF premium kit (880121-B21).
   NOTE: Not all configurations supporting the UMB 2SFF are shown. Primary 6-slot Riser (872336-B21) and/or
   Secondary and Tertiary 8-slot Riser (872338-B21) must be selected to support this option.
   NOTE: The 8 SFF can be upgraded with a multiple drive bay options with field upgrades. Please refer front diagram
   detail for available options. For optimal upgrade please upgrade Box 1, Box 2, Box 3, Box 4, Box 5 and Box 6 when
   using the 8 SFF HDD bay for a 48 SFF configuration.
   NOTE: A maximum of 20 NVMe drives can be supported with 4 NVMe drives in Box 1, 8 NVMe drives in Box 2 and 8
   NVMe drives in Box 3 or with 2 NVMe drives in Box 1, 8 NVMe drives in oxy 2, 8 NVMe drives in Box 3 and 2 NVMe
   drives in Box 4 using the Universal Media Bay (872267-B21).
   NOTE: All pre-configured models come with embedded software RAID support for 10 SATA drives and also include
   P408i-p Smart Array controller. Optional HPE Smart Array Controllers can be added.
   NOTE: The 2x 4-port NVMe Slimline riser (878360-B21) comes with 2 separate 4-port NVMe risers, one which install
   on the upper processor mezzanine tray. NVMe Slimline Riser option (878360-B21) cannot be used in a 2 processor
   configuration.


Maximum Internal Storage
                                       CAPACITY                         CONFIGURATION
   Hot Plug SFF SATA HDD               96 TB                            48 x 2 TB
   Hot Plug SFF SAS HDD                96 TB                            48 x 2 TB



                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 12
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Standard Features
   Hot Plug SFF SATA SSD             184 TB                          48 x 3.84 TB
   Hot Plug SFF SAS SSD              734 TB                          48 x 15.3 TB
   SFF NVMe SSD                      80 TB                           20 x 4 TB


Power Supply
  One of the following depending on model
  HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
  NOTE: Available in 94% efficiency.
  NOTE: Must order 4x 800W Flex Slot PSU.
  HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
  NOTE: Available in 94% efficiency.
  NOTE: 1600W Power supplies only support high line voltage (200VAC to 240VAC).
  HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug,
  tool-less installation into HPE ProLiant Gen10 Servers. Flex Slot power supplies are certified for high-efficiency
  operation and offer multiple power output options, allowing users to "right-size" a power supply for specific
  server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid
  "trapped" power capacity in the data center.

   All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (416151-B21). This jumper cord is
   also included with each standard AC power supply option kit. If a different power cord is required, please check
   the ProLiant Power Cables web page.

   To review the power requirements for your selected system, please use the HPE Power Advisor Tool.

   For information on power specifications and technical content visit HPE Server power supplies


Interfaces
   Serial                                     1 rear
   Video                                      1 front display port (optional with Universal Media Bay), 1 rear VGA
   HPE iLO Remote Management                  1
   Network Port
   HPE iLO Front Service Port                 1 (Not available if SID is installed)
   Micro SD Slot                              1 (Internal), 2 (optional, internal)
   NOTE: Requires the optional HPE Dual Micro SD 8GB USB kit.
   USB 2.0 Ports                              4 total: 2 front (optional); 2 rear
   USB 3.0 Ports                              5 total: 2 front; 2 rear, 1 internal
   NOTE: 2 front (optional) USB 2.0 ports need the HPE DL560 Gen10 Universal Media Bay Kit (872267-B21).


Operating Systems and Virtualization Software Support for ProLiant Servers
  Windows Server 2012 R2
  Windows Server 2016
  VMware ESXi 6.0 U3
  VMware ESXi 6.5 and U1 upon release


                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 13
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Standard Features
   Red Hat Enterprise Linux (RHEL) 6.9 and 7.3
   SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2
   CentOS 6.9 and 7.3
   Citrix XenServer 7.1, 7.3, 7.4
   Oracle Linux 7
   NOTE: Not directly supported / Community Supported (Based on RHEL so RHEL testing and enablement applicable
   to Cent OS) CentOS 6.9 / CentOS 7.3.
   NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS
   and Virtualization Software and latest listing of software drivers available for your server.
   http://www.hpe.com/info/ossupport.


Industry Standard Compliance
   ACPI 6.1 Compliant
   PCIe 3.0 Compliant
   WOL Support
   Microsoft® Logo certifications
   PXE Support
   USB 3.0 Compliant (internal); USB 2.0 Compliant
   SMBIOS 3.1
   UEFI 2.6
   Redfish API
   NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support
   please visit: http://www.hpe.com/servers/ashrae.


Graphics
    Integrated Video Standard
    Video modes up to 1920 x 1200@60Hz (32 bpp)
    16MB Video Memory
    HPE iLO 5 on system management memory
    32 MB Flash
    4 Gbit DDR 3 with ECC protection


HPE Server UEFI/Legacy ROM
  Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more
  secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10
  servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
  NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy
  BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
  UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

     Secure Boot and Secure Start enable for enhanced security
     Operating system specific functionality
     Support for > 2.2 TB (using GPT) boot drives
     USB 3.0 Stack

                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 14
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Standard Features
     Embedded UEFI Shell
     Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
     PXE boot support for IPv6 networks
     Workload profiles for simple performance optimization
   UEFI Boot Mode only:

     TPM 2.0 support
     NVMe Boot Support
     Platform Trust Technology (PTT) can be enabled
     iSCSI Software Initiator Support
     HTTP/HTTPs Boot support as a PXE alternative
     Boot support for option cards that only support a UEFI option ROM
   NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to
   support UEFI.
   NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for
   your HPE ProLiant Gen10 Server.


Embedded Management
  HPE Integrated Lights-Out        Monitor your servers for ongoing management, service alerting, reporting and
                                   remote management with HPE iLO. Learn more at
  (HPE iLO)
                                   http://www.hpe.com/info/ilo.

   UEFI                            Configure and boot your servers securely with industry standard Unified
                                   Extensible Firmware Interface (UEFI). Learn more at
                                   http://www.hpe.com/servers/uefi.

   Intelligent Provisioning        Hassle free server and OS provisioning for one or more servers with
                                   Intelligent Provisioning. Learn more at
                                   http://www.hpe.com/servers/intelligentprovisioning.

   iLO RESTful API                 iLO RESTful API is Redfish API conformance and offers simplified server
                                   management automation such as configuration and maintenance tasks based
                                   on modern industry standards. Learn more at
                                   http://www.hpe.com/info/restfulapi.


Server Utilities
  Active Health System             The HPE Active Health System (AHS) is an essential component of the iLO
                                   management portfolio that provides continuous, proactive health monitoring of
                                   HPE servers. Learn more at http://www.hpe.com/servers/ahs.

   Active Health System            Use the Active Health System Viewer, a web-based portal, to easily read AHS
                                   logs and speed problem resolution with HPE self-repair recommendations, to
   Viewer
                                   learn more visit: http://www.hpe.com/servers/ahsv.




                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 15
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Standard Features
   Smart Update                   Keep your servers up to date with the HPE Smart Update solution by using
                                  Smart Update Manager (SUM) to optimize the firmware and driver updates of
                                  the Service Pack for ProLiant (SPP). Learn more at
                                  http://www.hpe.com/info/smartupdate.

   iLO Amplifier Pack             Designed for large enterprise and service provider environments with hundreds of
                                  HPE servers, the iLO Amplifier Pack is a free, downloadable open virtual
                                  application (OVA) that delivers the power to discover, inventory and update Gen8,
                                  Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO
                                  Advanced License to unlock full capabilities. Learn more at
                                  http://www.hpe.com/servers/iLOamplifierpack.

   HPE iLO Mobile                 Enables the ability to access, deploy, and manage your server anytime from
                                  anywhere from select smartphones and mobile devices. For additional
   Application
                                  information please visit: http://www.hpe.com/info/ilo/mobileapp.

   RESTful Interface Tool         RESTful Interface tool (iLOREST) is a single scripting tool to provision using
                                  iLO RESTful API to discover and deploy servers at scale. Learn more at
                                  http://www.hpe.com/info/resttool.

   Scripting Tools                Provision one to many servers using your own scripts to discover and deploy
                                  with Scripting Tool (STK) for Windows and Linux or Scripting Tools for
                                  Windows PowerShell. Learn more at http://www.hpe.com/servers/stk or
                                  http://www.hpe.com/servers/powershell.

   HPE OneView Standard           HPE OneView Standard can be used for inventory, health monitoring, alerting,
                                  and reporting without additional fees. It can monitor multiple HPE server
                                  generations. The user interface is similar to the HPE OneView Advanced
                                  version, but the software-defined functionality is not available. Learn more at
                                  http://www.hpe.com/info/oneview.

   HPE Systems Insight            Ideal for environments already using HPE SIM, it allows you to monitor the
                                  health of your HPE ProLiant Servers and HPE Integrity Servers. Also provides
   Manager (HPE SIM)
                                  you with basic support for non-HPE servers. HPE SIM also integrates with
                                  Smart Update Manager to provide quick and seamless firmware updates.
                                  Learn more at http://www.hpe.com/info/hpesim.


Security
  UEFI Secure Boot and Secure Start support
  Immutable Silicon Root of Trust
  FIPS 140-2 validation (iLO 5 certification in progress)
  Common Criteria certification (iLO 5 certification in progress)
  Configurable for PCI DSS compliance
  Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser
  Support for Commercial National Security Algorithms (CNSA)


                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                         Page 16
QuickSpecs                                                                     HPE ProLiant DL580 Gen10 Server

Standard Features
   iLO Security Modes including a New iLO Advance Premium Security Edition License
   Granular control over iLO interfaces
   Smart card (PIV/CAC) and Kerberos based 2-factor Authentication
   Tamper-free updates - components digitally signed and verified
   Secure Recovery - recover critical firmware to known good state on detection of compromised firmware
   Ability to rollback firmware
   Secure erase of NAND/User data
   TPM (Trusted Platform Module) 1.2 option
   TPM (Trusted Platform Module) 2.0 option
   Bezel Locking Kit
   Chassis Intrusion detection option
   NOTE: HPE Trusted Platform Module 2.0 Option (864279-B21) works with Gen10 servers with UEFI Mode and not
   Legacy Mode. The Trusted Platform Module 2.0 Option can be configured to the 1.2 version through the UEFI BIOS
   to support TPM 1.2 functionality.
   NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced
   with any other TPM module.


About Trusted Platform Module
  Trusted Platform Module (TPM) is a separate processor that monitors the system state. TPM is a passive
  component needing to be updated and not able to lock down any component in the system except access to its
  own memory. It also provides some cryptographic operations - among them: creating RSA key pairs, and
  working with them.

   The first verification of signatures happens by code on the CPU, which can be intercepted and replaced.
   Emulating a "properly" booted system is possible by sending the right values to the TPM.

  HPE supports two version of TPM, the 1.2 device and the 2.0 device. The TPM 2.0 device works with Gen10 servers
  that are using a Linux operating system or Microsoft Windows Server 2016. Both TPM 1.2 and 2.0 are compatible
  with HPE ProLiant Gen9 and Gen10 servers. These TPM modules are not compatible with server generations prior to
  Gen9. Once the TPM module is installed, it locks into place and cannot be removed, nor can it be replaced with a
  different TPM device.
HPE Silicon Root of Trust
   HPE's Silcon Root of Trust provides protection because as soon as the server is powered on and the iLO
   firmware comes alive, it looks into the silicon for the immutable fingerprint that verifies all the firmware code is
   valid and uncompromised. Over a million lines of firmware code run, before the operating system starts, making
   it essential to confirm that all server essential firmware is free from malware or compromised code.


   Silicon Root of Trust is included with iLO5 Standard with all platforms that contain the iLO5 chip. That includes ML,
   DL, Apollo, C-Class Blades, and Synergy Compute Modules. HPE Cloudline and the HPE Microserver do not have
   silicon root of trust, since they do not contain an iLO5 silicon chip. This technology is NOT available on any previous
   version of HP ProLiant like the Gen9, Gen8, or Gen 7 servers, nor can those previous generations be retrofitted to
   accommodate the silicon root of trust.


   The silicon validates the iLO 5 firmware code before it is fetched and executed. If any malware or compromised code
   has been inserted in the iLO 5 firmware, the silicon will detect that, because any infected firmware code will not


                                  DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                          Page 17
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Standard Features
   match-up with the hash burned into the silicon. From there, the iLO 5 firmware validates the rest of the server
   firmware, namely the UEFI, CPLD, IE, and ME. The UEFI then validates the connection to the operating
   system, thus completing a complete root, or chain, that is anchored into the silicon.


   During operation of the server, HPE has a new technology that conducts run-time firmware validation that
   checks the firmware stored in the server. At any point, if compromised code or malware is inserted in any of the
   critical firmware, an iLO audit log alert is created to notify the customer that a compromised has occurred.


  In the unlikely event of a breach into the HPE server firmware, after detection has been completed, the
  customer may then securely recover the firmware automatically to a previous known good state. HPE provides
  this function through a new HPE license called, HPE iLO Advanced Premium Security Edition.
Warranty
  This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE
  Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date
  of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
  warranty services are available through HPE Pointnext operational services or customized service agreements.
  Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for
  details.
  Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
  Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into tw
  categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
  customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement
  but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace
  Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical
  support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                         Page 18
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Optional Features

Server Management
  HPE iLO Advanced             HPE iLO Advanced licenses offer smart remote functionality without
                               compromise, for all HPE ProLiant servers. The license includes the full
                               integrated remote console, virtual keyboard, video, and mouse (KVM), multi-
                               user collaboration, console record and replay, and GUI-based and scripted
                               virtual media and virtual folders. You can also activate the enhanced security
                               and power management functionality. Learn more about HPE iLO Advanced
                               at http://www.hpe.com/servers/iloadvanced.


   HPE iLO Advanced            HPE iLO Advanced Premium Security Edition for iLO 5 includes iLO Advanced
                               License plus high-end security modes, unique security capabilities, like
   Premium Security
                               Automatic FW recovery; Runtime FW verification, and Secure erase. Learn
   Edition
                               more about HPE iLO Advanced Premium Security Edition at:
                               http://www.hpe.com/servers/ilopremium.


   HPE OneView                 HPE OneView brings a new level of automation to infrastructure management by
                               taking a template driven approach to provisioning, updating, and integrating
   Advanced
                               compute, storage, and networking infrastructure. It provides full-featured licenses
                               which can be purchased for managing Gen8, Gen9 and Gen10 servers. To learn
                               more visit http://www.hpe.com/info/oneview.


   HPE Insight Cluster         HPE Insight Cluster Management Utility is a HyperScale management
                               framework that includes software for the centralized provisioning,
   Management Utility
                               management and monitoring of nodes and infrastructure. Learn more at
   (CMU)
                               http://www.hpe.com/info/cmu.


GPGPU Information
  HPE NVIDIA Tesla P40 24GB Computational Accelerator
  HPE NVIDIA Quadro P6000 Graphics Accelerator
  HPE NVIDIA Tesla V100 PCIe 16GB Computational Accelerator
  HPE NVIDIA Tesla P100 PCIe 16GB Computational Accelerator


Rack and Power Infrastructure
  The story may end with servers, but it starts with the foundation that makes compute go - and business
  grow. We've reinvented our entire portfolio of rack and power products to make IT infrastructure more
  secure, more practical, and more efficient. In other words, we've created a stronger, smarter, and
  simpler infrastructure to help you get the most out of your IT equipment. As an industry leader, Hewlett
  Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable
  management and system access.
   HPE G2 Advanced and Enterprise Racks are perfect for the server room or today's modern data center with
   enhanced airflow and thermal management, flexible cable management, and a 10 year Warranty to support
   higher density computing.
   HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°, include
   color-coded outlets and load segments and a low-profile design for optimal access to the rack and


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                          Page 19
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Optional Features
   support for dense rack environments.
   HPE Uninterruptible Power Systems are cost-effective power protection for any type workload. Some
   UPSs include options for remote management and extended runtime modules so you're critical dense
   data center is covered in power outages.
   HPE KVM Solutions include a console and switches designed to work with your server and IT
   equipment reliably. We've got a cost-effective KVM switch for your first rack and multiple connection IP
   switches with remote management and security capabilities to keep your data center rack up and
   running.
   Learn more about HPE Racks, KVM, PDUs and UPSs at HPE Rack and Power Infrastructure.



One Config Simple (SCE)
  SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
  configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your
  existing ordering processes. If you require "custom" rack configuration or configuration for products not
  available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized
  Partner for assistance. https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                           Page 20
QuickSpecs                                                                              HPE ProLiant DL580 Gen10 Server

Service and Support

HPE Pointnext - Service and Support

Protect your business beyond warranty with HPE Pointnext Operational Service
  HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional,
  and Operational Services to help accelerate your digital transformation. From the onset of your
  transformation journey, Advisory and Transformational Services focus on designing the transformation
  and creating a solution roadmap. Professional Services specializes in creative configurations with flawless
  and on-time implementation, and on-budget execution. Finally, operational services provides innovative
  new approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance.
  HPE is ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the
  complex simple.


Connect your devices:
  Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard
  Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single
  consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts,
  automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter
  Care Service customers will also benefit from proactive activities to help prevent issues and increase
  optimization. All of these benefits are already available to you with your server storage and networking
  products, securely connected to HPE support.

   1- IDC 2 - HP CSC reports 2014 - 2015
   Learn more about getting connected at http://www.hpe.com/services/getconnected.


Recommended Services
HPE Proactive Care* with 6 hour call-to-repair commitment, three year Support Service
  HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE,
  Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with
  recommendations and advice. This Service combines three years' proactive reporting and advice with our
  highest level of hardware support - HPE's 24x7, six hour hardware call-to-repair. HPE is the only leading
  manufacturer who makes this level of coverage available as a standard service offering for your most
  valuable servers. This service also includes collaborative software support for Independent Software
  Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

   https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

HPE Proactive Care* with 24x7 coverage, three year Support Service
  HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE,
  Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive reports with
  recommendations and advice This Service combines three years proactive reporting and advice with our 24x7
  coverage, four hour hardware response time when there is a problem. This service also includes
  collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft,
  etc.) running on your HPE servers.

   https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf


                                           DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 21
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Service and Support

HPE Proactive Care* - Next Business Day service, three year Support Service
  HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
  HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive
  reports with recommendations and advice. This service combines three years of Hardware Support where
  an HPE authorized representative will arrive at the Customer's site during the onsite coverage window to
  begin hardware maintenance service the next coverage day after the service request has been logged.
  This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red
  Hat, VMWare, Microsoft, etc.) running on your HPE servers.

   https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

   *HPE Proactive Care and HPE Proactive Care Advanced require that the customer connect their devices
   to make the most of these services and receive all the deliverables.


Parts and Materials
  HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered
  hardware product in operating condition, including parts and materials for available and recommended
  engineering improvements.

   Parts and components that have reached their maximum supported lifetime and/or the maximum usage
   limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical
   product data sheet will not be provided, repaired, or replaced as part of these services.

   The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
   replaced by HPE due to malfunction.


Other related Services
HPE Server Hardware Installation
  Provides for the basic hardware installation of HPE branded servers, storage devices and networking
  options to assist you in bringing your new hardware into operation in a timely and professional manner.
  https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf

HPE Installation and Startup Service
  Provides for the installation of your HPE hardware according to product specifications including options.
  The HPE service delivery technician will connect the product to a LAN as appropriate and enable remote
  support to allow for automatic case creation for hardware failures. Installation and start up services also
  includes the installation of one supported operating system type (Windows® or Linux).


HPE Datacenter Care service
  HPE Datacenter Care helps improve IT stability and security, increase the value of IT, and enable agility
  and innovation. It is a structured framework of repeatable, tested, and globally available services "building
  blocks."? You can deploy, operate, and evolve your datacenter wherever you are on your IT journey. With
  HPE Datacenter Care, you benefit from a personalized relationship with HPE via a single point of
  accountability for HPE and others' products. For more information, visit


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                           Page 22
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Service and Support
   http://www.hpe.com/services/datacentercare

HPE GreenLake Flex Capacity
  With HPE GreenLake Flex Capacity, you get the speed, scalability, and economics of the public cloud in
  the privacy of your data center. Gain the advantages of the public cloud—consumption-based payment,
  rapid scalability without worrying about capacity constraints. Reduce the "heavy lifting"? needed to
  operate a data center. And retain the advantages that IT provides the business (i.e., control, security).
  Deliver the right user experience, choose the right technology for the business, manage privacy and
  compliance, and manage the cost of IT. And, you have the option to use the public cloud when needed.


DC for Hyperscale
  Datacenter Care for Hyperscale is available for Service Providers and HPC customers who use a scale
  out approach to computing with a high volume homogenous infrastructure and resilient architecture can
  take advantage of this environment support tailored to their operating model.

HPE Factory Express for Servers and storage
  HPE Factory Express offers configuration, customization, integration and deployment services for HPE
  servers and storage products. Customers can choose how their factory solutions are built, tested,
  integrated, shipped and deployed.
  Factory Express offers service packages for simple configuration, racking, installation, complex configuration
  and design services as well as individual factory services, such as image loading, asset tagging, and custom
  packaging. HPE products supported through Factory Express include a wide array of servers and storage: HPE
  Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers as
  well as the MSAxxxx3PAR suite, XP, rackable tape libraries and configurable network switches.

HPE Service Credits
  HPE Service Credits offers flexible services and technical skills to meet your changing IT demands. With
  a menu of service that is tailored to suit your needs, you get additional resources and specialist skills to
  help you maintain peak performance of your IT. Offered as annual credits, you can plan your budgets
  while proactively responding to your dynamic business.


HPE Education Services
  Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes.
  Book on a class today and learn how to get the most from your technology investment.
  http://www.hpe.com/ww/learn


HPE Support Center
  The HPE Support Center is a personalized online support portal with access to information, tools and
  experts to support HPE business products. Submit support cases online, chat with HPE experts, access
  support resources or collaborate with peers.

   Learn more http://www.hpe.com/support/hpesc.

   HPE's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for
   live support. Now, you can get access to personalized IT support anywhere, anytime.
   HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE

                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                          Page 23
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Service and Support
   warranty, HPE Support Service or HPE contractual support agreement.

   *HPE Support Center Mobile App is subject to local availability.

   For more information: http://www.hpe.com/services.


   NOTE: HPE ProLiant DL580 Gen10 Server is covered under the HPE Service Contract applied to the HPE
   ProLiant Server. No separate HPE support services need to be purchased.
   Warranty and Support Services will extend to include HPE options configured with your server or storage device.
   The price of support service is not impacted by configuration details. HPE sourced options that are compatible
   with your product will be covered under your server support at the same level of coverage allowing you to
   upgrade freely. Installation for HPE options is available as needed. To keep support costs low for everyone,
   some high value options will require additional support. Additional support is only required on select high value
   workload accelerators, fibre switches, InfiniBand and UPS batteries over 12KVA. See the specific high value
   options that require additional support HERE.




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 24
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Pre-configured Models

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration
Information - Factory Integrated Models" section.
1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional
options section of this QuickSpecs.
2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any
additional options purchased will be shipped separately.
3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section
of this QuickSpecs.


                               Entry Model                   Base Model                Performance Model
 SKU Number                869848-B21                        869847-B21                      869845-B21
 Model Name          HPE ProLiant DL580 Gen10         HPE ProLiant DL580 Gen10          HPE ProLiant DL580
                      5120 2.2GHz 14-core 2P            6148 2.4GHz 20-core 4P         Gen10 8164 2.0GHz 26-
                       64GB-R P408i-p 8SFF              128GB-R P408i-p 8SFF          core 4P 256GB-R P408i-p
                      4x800W PS Entry Server           4x1600W PS Base Server          8SFF 4x1600W PS Perf
                                                                                               Server
 Processor                Intel® Xeon® 5120               Intel® Xeon® 6148              Intel® Xeon® 8164
 Number of                        2                               4                              4
 Processors
 Memory               64 GB (4x 16GB Registered 128 GB (8x 16GB Registered                 256 GB (8x 32GB
                           DIMMs, 2666 MT/s)               DIMMs, 2666 MT/s)           Registered DIMMs, 2666
                         NOTE: 24 DIMM slots                                                    MT/s)
                     available with Entry Model; 2
                      more processor slots and 24
                       more DIMMs available via
                      optional HPE DL5x0 Gen10
                      CPU Mezzanine Board Kit
                              (872222-B21).
 Network              1 Gb 4-port 331FLR Adapter                  10GbE                       10/25GbE
                                                       FlexFabric 2-port 535FLR-T FlexFabric 2-port 640FLR-
 Controller
                                                                 Adapter                      T Adapter
 Storage                                          HPE Smart Array P408i-p controller
                       NOTE: Additional Storage controllers are available as options, to enable both SAS
 Controller
                       capability as well as provide data retention with flash-backed write cache (FBWC).
 Power Supply                    4x 800W                       4x 1600W                      4x 1600W
                                                         NOTE: 1600W Power supplies only support high line
                                                                     voltage (200VAC to 240VAC).
 PCI-Express            3 PCIe 3.0 slots available     16 PCIe 3.0 slots available 16 PCIe 3.0 slots available
                        NOTE: 16 PCIe 3.0 slots
 Slots
                     available with the secondary
                          riser and 4 processors
                                 installed.
 Hard Drive                                             None ship standard
 Internal                                                  8 SFF Drive Bays
                     NOTE: Can be expanded up to a max. of 48 SFF drives, with optional HPE DL580 Gen10
 Storage
                     8SFF HDD Bay Kit (878366-B21).
                     NOTE: Optionally NVMe SSD drives can be added with HPE DL580 Gen10 Premium
                     6SFF and 2 NVMe or 8SFF Bay Kit (878364-B21) which can be added to Box1, 2 or 3 or


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 25
QuickSpecs                                                                HPE ProLiant DL580 Gen10 Server

Pre-configured Models
                  HPE DL580 NVMe 8 SSD Express Bay Enablement Kit (878362-B21) which can be added
                  to Box 1 (only 4 NVMe drives), Box 2 and Box 3.
                  NOTE: Alternatively, optional HPE DL560 Gen10 Universal Media Bay Kit (872267-B21)
                  can be added in Box 4.
 Optical Drive                                Optional via Universal Media Bay
 Fans                                           12 hot plug fans, n+1 redundant
 Management          HPE iLO Standard with              HPE iLO Standard with Intelligent Provisioning
                     Intelligent Provisioning          (embedded), HPE OneView Standard (requires
                        (embedded), HPE             download); HPE iLO Advanced, HPE iLO Advanced
                       OneView Standard            Premium Security Edition (requires license) and HPE
                   (requires download); HPE                          OneView Advanced
                    iLO Advanced, HPE iLO
                       Advanced Premium
                    Security Edition and HPE
                       OneView Advanced
                        (require licenses)
 Form Factor                           Rack (4U), HPE DL580 Gen10 4U Rail Kit with CMA
 Warranty              3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response




                             DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 26
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Configuration Information - Factory Integrated Models

Recommended Options
Offering the best combination of performance, value and availability, Recommended Options have been
selected by HPE experts to provide the right technology for a range of workloads and market segments.
Fully integrated into the HPE management and security experience, Recommended Options provide the
best fit with timely availability.

Extended Options
Extended Options provide an extended catalog of products tailored for customers in specific markets or with
specific workloads, requiring the utmost in performance or value. Fully integrated into the HPE management
and security experience, Extended Options represent great value and performance but typically have a
longer lead-time.


This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved
configurator. Contact your local sales representative for information on configurable product offerings and
requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of
initial hard drives ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional
information.


Step 1: Base Configuration (choose one of the following configurable models)
Server               HPE ProLiant DL580 Gen10 8SFF Configure-to-order Server
description
SKU Number           869854-B21
TAA SKU              878213-B21
Chipset              Intel® C621 Chipset
Processor            4U Server Chassis with 2 processor slots available; 4 processor configuration would require
                     optional HPE
                     ProLiant HPE DL5x0 Gen10 CPU Mezzanine Board Kit (872222-B21)
DIMM Slots           24 DIMM slots for RDIMM, LRDIMM DDR4 Memory; 48 DIMM configuration would require
                     optional HPEProLiant HPE DL5x0 Gen10 CPU Mezzanine Board Kit (872222-B21) and 4
                     processors
Network              None. FlexibleLOM slot (various options can be chosen for networking; NIC cards also
                     available via expansion slots)
Controller
Storage              HPE Smart Array S100i
                     NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled.
Controller
                     For enabling, please select HPE FIO Enable Smart Array SW RAID (784308-B21).
PCIe                 None. Must order a primary riser (16 PCIe 3.0 slots are available if all processors are chosen
                     and the primary, secondary and tertiary Riser Kits have been installed)
Drive Cage -         8 SFF in Box 1, no drives
included
Fans                 12 hot plug fans, (n+1) redundant


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                            Page 27
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Configuration Information - Factory Integrated Models
Management          HPE iLO Standard with Intelligent Provisioning and (Standard); HPE OneView Standard
                    (requires download) and HPE iLO Advanced (require additional licenses), HPE iLO
                    Advanced Premium Security Edition (require additional licenses), HPE OneView
                    Advanced (require additional licenses)
microSD Slots       1 microSD card slot (internal)
TPM Connector       1 Trusted Platform Module (TPM) connector
UEFI                BIOS Legacy mode (field configurable) or Unified Extensible Firmware Interface (UEFI)
                    mode (default)
USB                 7 USB ports (2 USB 2.0 and 5 USB 3.0), Optional 2 front available via universal media kit
                    upgrade
Video Ports         2 video ports (1 front optional via the Universal Media Kit upgrade option, 1 rear)
Rails               HPE DL580 Gen10 4U Rail Kit with CMA
NOTE: Trade Agreement Act (TAA) and means that these SKUs are manufactured in countries that are part
of the global trade act. This provides greater security assurance that these servers come from countries that
signed the agreement act. This is particularly important to HPE customers in our federal sector and other
verticals that have concerns about the country of origin for our solutions.
NOTE: PCIe slot availability is dependent on the number of processors and riser kits installed. Please refer
to the "Expansion slots" section for more details.
NOTE: For the DL580 Gen10, the number of processors can be one, two, three or four installed. For three or four
processors, the HPE DL5x0 Gen10 CPU Mezzanine Board Kit is required.
NOTE: This applies to CTO configurations, field upgrades may differ depending on field configuration.
Step 2a: Choose Processor Options
   Processor Option Kits - Recommended                                                              Required
                                                                                                   Processor
   HPE DL580 Gen10 Intel Xeon-Platinum 8180 (2.5GHz/28-core/205W) FIO Processor Kit                878158-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8170 (2.1GHz/26-core/165W) FIO Processor Kit                878154-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8168 (2.7GHz/24-core/205W) FIO Processor Kit                878153-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8160 (2.1GHz/24-core/145W) FIO Processor Kit                878150-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8158 (3.0GHz/12-core/105W) FIO Processor Kit                878149-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8156 (3.6GHz/4-core/105W) FIO Processor Kit                 878148-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6154 (3.0GHz/18-core/200W) FIO Processor Kit                    878146-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.


                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 28
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Configuration Information - Factory Integrated Models
   HPE DL580 Gen10 Intel Xeon-Gold 6152 (2.1GHz/22-core/135W) FIO Processor Kit               878145-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6150 (2.7GHz/18-core/165W) FIO Processor Kit               878144-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6148 (2.4GHz/20-core/145W) FIO Processor Kit               878143-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6146 (3.2GHz/12-core/165W) FIO Processor Kit               878142-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6144 (3.5GHz/8-core/150W) FIO Processor Kit                878141-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6142 (2.6GHz/16-core/145W) FIO Processor Kit               878139-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6140 (2.3GHz/18-core/140W) FIO Processor Kit               878137-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6136 (3.0GHz/12-core/150W) FIO Processor Kit               878135-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6134 (3.3GHz/8-core/130W) FIO Processor Kit                878133-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6132 (2.6GHz/14-core/140W) FIO Processor Kit               878132-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6130 (2.1GHz/16-core/125W) FIO Processor Kit               878131-L21
   (Recommended)
   HPE DL580 Gen10 Intel Xeon-Gold 6128 (3.4GHz/6-core/115W) FIO Processor Kit                878130-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6126 (2.6GHz/12-core/125W) FIO Processor Kit               878129-L21
   (Recommended)
   HPE DL580 Gen10 Intel Xeon-Gold 5122 (3.6GHz/4-core/105W) FIO Processor Kit                878128-L21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) FIO Processor Kit               878127-L21
   (Recommended)
   HPE DL580 Gen10 Intel Xeon-Gold 5118 (2.3GHz/12-core/105W) FIO Processor Kit               878126-L21
   (Extended)


                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 29
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Configuration Information - Factory Integrated Models
   HPE DL580 Gen10 Intel Xeon-Gold 5115 (2.4GHz/10-core/85W) FIO Processor Kit                   878125-L21
   (Recommended)
   Processor Option Kits - Extended
   HPE DL580 Gen10 Intel Xeon-Platinum 8176M (2.1GHz/28-core/165W) FIO Processor Kit             878157-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8176 (2.1GHz/28-core/165W) FIO Processor Kit              878156-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8170M (2.1GHz/26-core/165W) FIO Processor Kit             878155-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8180M (2.5GHz/28-core/205W) FIO Processor Kit             878159-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8165 (2.8GHz/24-core/205W) FIO Processor Kit              P00881-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8164 (2.0GHz/26-core/150W) FIO Processor Kit              878152-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8160M (2.1GHz/24-core/145W) FIO Processor Kit             878151-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8153 (2.0GHz/16-core/125W) FIO Processor Kit              878147-L21
   (Extended)
   HPE DL580 Gen10 Intel Xeon-Gold 6143 (2.8GHz/16-core/205W) FIO Processor Kit                  P00880-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6142M (2.6GHz/16-core/150W) FIO Processor Kit                 878140-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6140M (2.3GHz/18-core/140W) FIO Processor Kit                 878138-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6138 (2.0GHz/20-core/125W) FIO Processor Kit                  878136-L21
   (Extended)
   HPE DL580 Gen10 Intel Xeon-Gold 6134M (3.2GHz/8-core/130W) FIO Processor Kit                  878134-L21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   NOTE: If more than one processor is desired select one xxxxxx-L21 and one, two or three corresponding
   xxxxxx-B21 processors. Mixing different processor models is not supported.
Step 2b: Choose Memory Options (at least one Memory Kit is required)


                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                     Page 30
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Configuration Information - Factory Integrated Models
   Only one of the following from each list unless otherwise noted
   Memory Options - Recommended
   HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory           815097-B21
   Kit (Recommended)
   HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart                815098-B21
   Memory Kit (Recommended)
   HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory           835955-B21
   Kit (Recommended)
   HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory           815100-B21
   Kit (Recommended)
   HPE 64GB (1x64GB) Quad Rank x4 DDR4-2666 CAS-19-19-19 Load Reduced Smart                815101-B21
   Memory Kit (Recommended)
   HPE 128GB (1x128GB) Octal Rank x4 DDR4-2666 CAS-22-19-19 3DS Load Reduced               815102-B21
   Memory Kit (Recommended)
   Memory Options - Extended
   HPE 8GB (1x8GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit         876181-B21
   (Extended)
   NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
Step 2c: Choose Power Supplies (at least one Power Supply Kit is required)
   Only one or more of the following from each list unless otherwise noted
   Power Supplies - Recommended
   HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)                865414-B21
   HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)               830272-B21
   NOTE: Select one or more power supplies. For 800W, 4 power supplies need to be selected.
   NOTE: 1600W Power supplies only support high line voltage (200VAC to 240VAC).
   NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is
   run to determine the right size power supply for your server configuration. The HPE Power Advisor is
   located at: http://www.hpe.com/info/hppoweradvisor.
   NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported.
   NOTE: HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power
   Distribution Units (PDUs). Visit HPE power cords for a full list of optional power cords.
Step 2d: Choose network adapters (at least one adapter is required)
   Only one of the following from each list unless otherwise noted
   Network adapters - Recommended
   HPE Ethernet 1Gb 4-port 331FLR Adapter (Recommended)                                         629135-B22
   HPE Ethernet 1Gb 4-port 366FLR Adapter (Recommended)                                         665240-B21
   HPE FlexFabric 10Gb 2-port 533FLR-T Adapter (Recommended)                                    700759-B21
   HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter (Recommended)                                 700751-B21
   HPE Ethernet 10Gb 2-port 535FLR-T Adapter (Recommended)                                      817721-B21
   HPE FlexFabric 10Gb 4-port 536FLR-T Adapter (Recommended)                                    764302-B21
   HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter (Recommended)                                   727054-B21
   HPE Ethernet 10Gb 2-port 562FLR-T Adapter (Recommended)                                      817745-B21



                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                      Page 31
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Configuration Information - Factory Integrated Models
   HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter
                                                                                                 867334-B21
   (Recommended)
   HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter (Recommended)                                817709-B21
   HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 Adapter (Recommended)                                817749-B21
Step 3: Choose Additional Factory Integratable Options
   Only one of the following from each list unless otherwise noted
   HPE Gen10 TPM 1.2 FIO Setting                                                                  872108-B21
   NOTE: TPM 2.0 is set as default, for 1.2 TPM setting instead, please select this option.
   HPE OneView
   HPE OneView w/o iLO including 3yr 24x7 Support 1-server FIO LTU                                   P8B31A
   HPE OneView for ProLiant DL Server including 3yr 24x7 Support FIO Bundle Physical 1-              E5Y43A
   server LTU
   BIOS Mode
   HPE Legacy FIO Mode Setting                                                                    758959-B22
   NOTE: Selecting this option will change the UEFI BIOS setting into Legacy BIOS
   Setting.
   Controller State
   HPE FIO Enable Smart Array SW RAID                                                             784308-B21
   NOTE: If not selecting an HPE Storage Controller, this option may be selected to support RAID and Hot-plug
   capabilities for SATA hard drives. The S100i does not support SAS hard drives.
Step 4: Choose Additional Options for Factory Integration from Core and additional
Options sections below




                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                      Page 32
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Core Options

Recommended Options
Offering the best combination of performance, value and availability, Recommended Options have been
selected by HPE experts to provide the right technology for a range of workloads and market segments.
Fully integrated into the HPE management and security experience, Recommended Options provide the
best fit with timely availability.

Extended Options
Extended Options provide an extended catalog of products tailored for customers in specific markets or with
specific workloads, requiring the utmost in performance or value. Fully integrated into the HPE management
and security experience, Extended Options represent great value and performance but typically have a
longer lead-time.

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered,
Hewlett Packard Enterprise recommends the use of an Hewlett Packard Enterprise approved configurator.
Contact your local sales representative for additional information.
HPE Unique Options - Recommended
  HPE DL580 Gen10 12Gb 24-port SAS Expander Card Kit with Cables (Recommended)                    881101-B21
  HPE DL560 Gen10 Universal Media Bay Kit (Recommended)                                           872267-B21
  HPE DL580 NVMe 8 SSD Express Bay Enablement Kit (Recommended)                                   878362-B21
  HPE DL580 Gen10 Premium 6SFF and 2 NVMe or 8SFF Bay Kit (Recommended)                           878364-B21
  HPE DL580 Gen10 8SFF HDD Bay Kit (Recommended)                                                  878366-B21
  HPE DL580 Gen10 2SFF Premium HDD Front NVMe/SAS/SATA Kit (Recommended)                          880121-B21
  HPE DL5x0 Gen10 System Insight Display Kit (Recommended)                                        872261-B21
  HPE DL5x0 Gen10 CPU Mezzanine Board Kit (Recommended)                                           872222-B21
  NOTE: HPE DL5x0 Gen10 CPU Mezzanine Board Kit (Recommended) (872222-B21) is
  needed for three or four processor configurations.
  HPE DL5x0 Gen10 CPU Mezzanine UPI Performance Kit (Recommended)                                 875608-B21
  HPE DL580 Gen10 4U Rail Kit with Cable Management Arm (Recommended)                             872151-B21
  HPE DL580 Gen10 6-slot 4 x8/2 x16 2-port 4 NVMe Slimline Primary Riser Kit (Recommended) 872336-B21
  NOTE: This kit supports 6 PCIe slots and 2 NVMe ports which can support up to 4 NVMe
  drives.
  HPE DL580 Gen10 8-slot 6 x8/2 x16 2-port 4 NVMe Slimline Secondary Riser Kit                    872338-B21
  (Recommended)
  NOTE: This kit supports 8 PCIe slots and 2 NVMe ports which can support up to 4 NVMe
  drives.
  HPE DL580 Gen10 7-slot 4 x8/3 x16 Primary Riser Kit (Recommended)                               878214-B21
  HPE DL580 Gen10 2x 4-port 16 NVMe Slimline Riser Kit (Recommended)                              878360-B21
  NOTE: This kit occupies the primary riser slot, supports 16 NVMe drives and must be ordered
  when supporting greater than 8 NVMe drives.
  HPE DL38x Gen10 8-pin Cable Kit (Recommended)                                                   871828-B21
  NOTE: Must be ordered if P6000 is selected. If more than 3 GPUs are selected ,then 2 Quantity
  of cable kit is required.
  HPE DL38x Gen10 8-pin Keyed Cable Kit (Recommended)                                             871829-B21


                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 33
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Core Options
   NOTE: Must be ordered if P40/ V100/ P100 is selected. If more than 3 GPUs are selected ,then
   2 Quantity of cable kit is required.
   NOTE: The HPE DL580 Gen10 8SFF HDD Bay Kit (Recommended) (878366-B21) is shipped
   default with the server.
   NOTE: A minimum of 1 primary riser must be ordered.
   HPE DL38X/560/580/ML350 Gen10 P824i-p Cable Kit (Recommended)                                P00614-B21
   NOTE: Needs to be ordered with the SmartArray P824i-p MR Gen10 controller.

   HPE DL580 Gen10 9-slot 6 x8/3 x16 Secondary Riser Kit (Recommended)                              872340-B21
   HPE DL580 Gen10 GPU Bracket Kit (Recommended)                                                    P00268-B21
   NOTE: HPE DL580 Gen10 GPU Bracket Kit (Extended) (P00268-B21) kit is needed to install
   GPUs in slots 4 and 11 and must be be ordered along with the GPU cable kits 871828-B21 (for
   P6000) or 871829-B21 (for P40). Refer Expansion Slots sections for additional details on risers.


HPE Processors - Recommended
  HPE DL580 Gen10 Intel Xeon-Platinum 8180 (2.5GHz/28-core/205W) Processor Kit                   878158-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Platinum 8170 (2.1GHz/26-core/165W) Processor Kit                   878154-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Platinum 8168 (2.7GHz/24-core/205W) Processor Kit                   878153-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Platinum 8160 (2.1GHz/24-core/145W) Processor Kit                   878150-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Platinum 8158 (3.0GHz/12-core/105W) Processor Kit                   878149-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Platinum 8156 (3.6GHz/4-core/105W) Processor Kit                    878148-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Gold 6154 (3.0GHz/18-core/200W) Processor Kit                       878146-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Gold 6152 (2.1GHz/22-core/135W) Processor Kit                       878145-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.
  HPE DL580 Gen10 Intel Xeon-Gold 6150 (2.7GHz/18-core/165W) Processor Kit                       878144-B21
  (Recommended)
  NOTE: Ships with Performance Heatsink.




                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 34
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Core Options
   HPE DL580 Gen10 Intel Xeon-Gold 6146 (3.2GHz/12-core/165W) Processor Kit                878142-B21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6144 (3.5GHz/8-core/150W) Processor Kit (Recommended)878141-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6142 (2.6GHz/16-core/145W) Processor Kit                878139-B21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6140 (2.3GHz/18-core/140W) Processor Kit                878137-B21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6136 (3.0GHz/12-core/150W) Processor Kit                878135-B21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6134 (3.3GHz/8-core/130W) Processor Kit (Recommended)878133-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6132 (2.6GHz/14-core/140W) Processor Kit                878132-B21
   (Recommended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6130 (2.1GHz/16-core/125W) Processor Kit                878131-B21
   (Recommended)
   HPE DL580 Gen10 Intel Xeon-Gold 6128 (3.4GHz/6-core/115W) Processor Kit (Recommended)878130-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6126 (2.6GHz/12-core/125W) Processor Kit                878129-B21
   (Recommended)
   HPE DL580 Gen10 Intel Xeon-Gold 5122 (3.6GHz/4-core/105W) Processor Kit (Recommended)878128-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 5120 (2.2GHz/14-core/105W) Processor Kit                878127-B21
   (Recommended)
   HPE DL580 Gen10 Intel Xeon-Gold 5118 (2.3GHz/12-core/105W) Processor Kit (Extended)     878126-B21
   HPE DL580 Gen10 Intel Xeon-Gold 5115 (2.4GHz/10-core/85W) Processor Kit (Recommended)878125-B21
   HPE Processors - Extended
   HPE DL580 Gen10 Intel Xeon-Platinum 8180M (2.5GHz/28-core/205W) Processor Kit           878159-B21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8176M (2.1GHz/28-core/165W) Processor Kit           878157-B21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8176 (2.1GHz/28-core/165W) Processor Kit (Extended) 878156-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8170M (2.1GHz/26-core/165W) Processor Kit         878155-B21
   (Extended)
   NOTE: Ships with Performance Heatsink.


                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 35
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Core Options
   HPE DL580 Gen10 Intel Xeon-Platinum 8165 (2.3GHz/24-core/205W) Processor Kit (Extended) P00881-B21
   NOTE: Ships with Performance Heatsink.
   NOTE: Supports "Core boosting"? Learn more http://www.hpe.com/info/ist.
   NOTE: To enable this feature an iLO Advanced, or iLO Advanced Premium Security edition
   License are required.
   HPE DL580 Gen10 Intel Xeon-Platinum 8164 (2.0GHz/26-core/150W) Processor Kit (Extended) 878152-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon -Platinum 8160M (2.1GHz/24-core/145W) Processor Kit           878151-B21
   (Extended)
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Platinum 8153 (2.0GHz/16-core/125W) Processor Kit (Extended) 878147-B21
   HPE DL580 Gen10 Intel Xeon-Gold 6148 (2.4GHz/20-core/145W) Processor Kit (Extended)      878143-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6143 (2.8GHz/16-core/205W) Processor Kit (Extended)      P00880-B21
   NOTE: Ships with Performance Heatsink.
   NOTE: Supports "Core boosting"? Learn more http://www.hpe.com/info/ist.
   NOTE: To enable this feature an iLO Advanced, or iLO Advanced Premium Security edition
   License are required.
   HPE DL580 Gen10 Intel Xeon-Gold 6142M (2.6GHz/16-core/150W) Processor Kit (Extended) 878140-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6140M (2.3GHz/18-core/140W) Processor Kit (Extended) 878138-B21
   NOTE: Ships with Performance Heatsink.
   HPE DL580 Gen10 Intel Xeon-Gold 6138 (2.0GHz/20-core/125W) Processor Kit (Extended)      878136-B21
   HPE DL580 Gen10 Intel Xeon-Gold 6134M (3.2GHz/8-core/130W) Processor Kit (Extended)      878134-B21
   NOTE: Ships with Performance Heatsink.
   NOTE: If more than one processor is desired select one xxxxxx-L21 and one, two or three
   corresponding xxxxxx-B21 processors. Mixing different processor models is not supported.


Memory Selection
  To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product
  availability, HPE recommends memory from the list located here:
  http://www.hpe.com/products/recommend.

HPE Memory
  NOTE: Hewlett Packard Enterprise memory from previous generation servers is not qualified or warranted with
  this HPE ProLiant Server. HPE SmartMemory is required to realize the memory performance improvements
  and enhanced functionality listed in this document for Gen10. For additional information, please see the HPE
  SmartMemory QuickSpecs.
  NOTE: LRDIMM and RDIMM are all distinct memory technologies and cannot be mixed within a server.
  HPE Memory - Recommended
  HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit                 815097-B21
  (Recommended)


                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                      Page 36
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Core Options
  HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit         815098-B21
  (Recommended)
  HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit           835955-B21
  (Recommended)
  HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit           815100-B21
  (Recommended)
  HPE 64GB (1x64GB) Quad Rank x4 DDR4-2666 CAS-19-19-19 Load Reduced Smart Memory             815101-B21
  Kit (Recommended)
  HPE 128GB (1x128GB) Octal Rank x4 DDR4-2666 CAS-22-19-19 3DS Load Reduced Memory            815102-B21
  Kit (Recommended)
  HPE Memory - Extended
  HPE 8GB (1x8GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit             876181-B21
  (Extended)
  NOTE: The maximum memory speed is a function of the memory type, memory
  configuration, and processor model.
HPE Persistent Memory - Recommended
  HPE 16GB NVDIMM Single Rank x4 DDR4-2666 Module Kit (Recommended)                           845264-B21
  NOTE: A maximum of 6 NVDIMMs are supported per processor and the DL560 can support a
  maximum of 24 NVDIMMs.
  NOTE: Please refer to http://www.hpe.com/info/persistentmemory for NVDIMM
  population rules and guidelines.


HPE Optical Drives - Recommended
  HPE 9.5mm SATA DVD-ROM Optical Drive (Recommended)                                            726536-B21
  NOTE: The optional Universal Media Bay Kits are required for this option. (HPE ProLiant DL560
  Gen10 Universal Media Bay kit - 872267-B21).
  HPE 9.5mm SATA DVD-RW Optical Drive (Recommended)                                             726537-B21
  NOTE: The optional Universal Media Bay Kits are required for this option. (HPE ProLiant
  DL560 Gen10 Universal Media Bay kit - 872267-B21).
  HPE Mobile USB DVD-RW Optical Drive (Recommended)                                             701498-B21
  NOTE: External.


HPE Drives
  NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the
  server backplane) should operate at the same data transfer rate or the system bandwidth will be
  negotiated down to an acceptable level for all components.
  NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive
  QuickSpecs for details.
  Enterprise - 12G SAS - SFF Drives - Recommended
  HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD 870753-B21
  (Recommended)
  HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD 872475-B21
  (Recommended)



                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 37
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Core Options
  HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD 870757-B21
  (Recommended)
  HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD 872477-B21
  (Recommended)
  HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD 870759-B21
  (Recommended)
  HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD 872479-B21
  (Recommended)
  HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware        872481-B21
  HDD (Recommended)
  HPE 2.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware        881457-B21
  HDD (Recommended)
  Enterprise - 12G SAS - SFF Drives - Extended
  HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware 870765-B21
  HDD (Extended)
  Midline - 12G SAS - SFF Drives - Recommended
  HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD             832514-B21
  (Recommended)
  HPE 2TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e HDD (Recommended)                    765466-B21
  Midline - 12G SAS - SFF Drives - Extended
  HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD 765464-B21
  (Extended)
SSD Selection
  To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product
  availability, HPE recommends SSDs from the list located here:
  http://www.hpe.com/products/recommend.
  Write Intensive - SAS - SFF - Solid State Drives - Recommended
  HPE 400GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 873351-B21
  HPE 800GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 873355-B21
  HPE 1.6TB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 873357-B21
  Read Intensive - SAS - SFF - Solid State Drives - Recommended
  HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 872390-B21
  HPE 480GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                  875311-B21
  HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 875313-B21
  HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 872392-B21
  HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                                 875326-B21



                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                     Page 38
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Core Options
   HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             872394-B21
   Read Intensive - SAS - SFF - Solid State Drives - Extended
   HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                875330-B21
   HPE 7.68TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                870144-B21
   HPE 15.3TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                870148-B21
   Read Intensive - SATA - SFF - Solid State Drives - Recommended
   HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD     P04556-B21
   (Recommended)
   HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             875503-B21
   HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD     P04560-B21
   (Recommended)
   HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             P06194-B21
   HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             875509-B21
   HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             P06196-B21
   HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD     P04564-B21
   (Recommended)
   HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                              875511-B21
   HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             P06198-B21
   HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD    P04566-B21
   (Recommended)
   HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Recommended)                                                                             875513-B21
   HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD    P04570-B21
   (Recommended)

   Read Intensive - SATA - SFF - Solid State Drives - Extended
   HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                877740-B21
   HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                877746-B21
   HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                877752-B21
   HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
   (Extended)                                                                                868822-B21




                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 39
QuickSpecs                                                                HPE ProLiant DL580 Gen10 Server

Core Options
  HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                 877758-B21
  HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                 P06200-B21
  HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                 877764-B21
  Read Intensive - NVMe - SFF - Solid State Drives - Extended
  HPE 480GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed            875587-B21
  Firmware SSD (Extended)
  HPE 960GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed            875589-B21
  Firmware SSD (Extended)
  HPE 1.92TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed           875591-B21
  Firmware SSD (Extended)
  HPE 4TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware
  SSD (Extended)                                                                             877988-B21
  Write Intensive - NVMe - SFF - Solid State Drives - Extended
  HPE 375GB NVMe x4 Lanes Write Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed           878014-B21
  Firmware SSD (Extended)
  NOTE: A NVME (878366-B21) or Premium (878364-B21) drive cage are required to support these drives in
  conjunction with an NVMe riser. Consult Pages 11-13 for recommended NVMe server configurations.
  NOTE: NVMe drives are not supported by HPE Smart Array controllers.
  Read Intensive - M.2 - Solid State Drives - Recommended
  HPE 480GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              875498-B21
  Read Intensive - M.2 - Solid State Drives - Extended
  HPE 960GB SATA 6G Read Intensive M.2 2280 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                 875500-B21
  Mixed Use - SAS - SFF - Solid State Drives - Recommended
  HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872374-B21
  HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              873359-B21
  HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872376-B21
  HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              873363-B21
  HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872382-B21
  HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              873365-B21
  HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872386-B21
  Mixed Use - SAS - SFF - Solid State Drives - Extended
  HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                 873367-B21


                             DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 40
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Core Options
  Mixed Use - SATA - SFF - Solid State Drives - Recommended
  HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              875483-B21
  HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              875470-B21
  HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872344-B21
  HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              875474-B21
  HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872348-B21
  HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              875478-B21
  HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              872352-B21
  HPE 3.84TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                              P00896-B21

  Mixed Use - SATA - SFF - Solid State Drives - Extended
  HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                880295-B21
  HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                877776-B21
  HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                877782-B21
  HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD
  (Extended)                                                                                877788-B21
  Mixed Use - NVMe - SFF - Solid State Drives - Recommended
  HPE 400GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware
  SSD (Extended)                                                                            875593-B21
  HPE 800GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware
  SSD (Extended)                                                                            875595-B21
  HPE 1.6TB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware
  SSD (Extended)                                                                            875597-B21
  NOTE: A NVMe (878366-B21) or Premium (878364-B21) drive cage are required to support these drives in
  conjunction with an NVMe riser Option. Consult pages 11-13 for recommended NVMe server configurations.
  NOTE: NVMe drives are not supported by HPE Smart Array controllers.
  Mixed Use - SATA - M.2 - Solid State Drives - Recommended
  HPE 240GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD
  (Recommended)                                                                             875488-B21
  Mixed Use - SATA - M.2 - Solid State Drives - Extended
  HPE 480GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD (Extended) 875490-B21
  HPE 960GB SATA 6G Mixed Use M.2 2280 3yr Wty Digitally Signed Firmware SSD (Extended) 875492-B21
  NOTE: M.2 drives go in the Primary Riser and use S100i SATA controller only.
  NOTE: M.2 supports Software RAID only.

                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 41
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Core Options
  Dual SATA M.2 - UFF to SFF SCM SSD - Recommended
  HPE Dual 480GB SATA 6G Read Intensive M.2 - UFF to SFF SCM 3yr Wty Digitally Signed         P06609-B21
  Firmware SSD (Recommended)
  HPE Dual 240GB SATA 6G Mixed Use M.2 - UFF to SFF SCM 3yr Wty Digitally Signed              P06607-B21
  Firmware SSD (Recommended)
Hard Drive Blank Kits - Recommended
  HPE Small Form Factor Hard Drive Blank Kit (Recommended)                                    666987-B21
Hard Drive Kits - Recommended
  HPE Universal SATA HHHL 3yr Wty M.2 Kit (Recommended)                                       878783-B21


HPE Networking
  25 Gigabit Ethernet adapters - Recommended
  HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter (Recommended)                                  867328-B21
  HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter (Recommended)                                  817718-B21
  HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 Adapter (Recommended)                              817749-B21
  HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter (Recommended)                                  817753-B21
  10 Gigabit Ethernet adapters - Recommended
  HPE Ethernet 10Gb 2-port 530SFP Adapter (Recommended)                                       652503-B21
  HPE Ethernet 10Gb 2-port 530T Adapter (Recommended)                                         656596-B21
  HPE Ethernet 10Gb 2-port 535T Adapter (Recommended)                                         813661-B21
  HPE Ethernet 10Gb 2-port 562T Adapter (Recommended)                                         817738-B21
  HPE Ethernet 10Gb 2-port 562SFP+ Adapter (Recommended)                                      727055-B21
  10 Gigabit Ethernet adatpers - Extended
  HPE Ethernet 10Gb 2-port 521T Adapter (Extended)                                            867707-B21
  NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
  NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables
  for fiber-optic environments must be purchased separately. Please see the related NIC
  QuickSpecs for Technical Specifications and additional information:
  https://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html.
  1 Gigabit Ethernet adapters - Recommended
  HPE Ethernet 1Gb 4-port 331T Adapter (Recommended)                                          647594-B21
  HPE Ethernet 1Gb 4-port 366T Adapter (Recommended)                                          811546-B21
  1 Gigabit Ethernet adapters - Extended
  HPE Ethernet 1Gb 2-port 332T Adapter (Extended)                                             615732-B21
  HPE Ethernet 1Gb 2-port 361T Adapter (Extended)                                             652497-B21
  FlexibleLOM Adapters - Recommended
  HPE Ethernet 1Gb 4-port 331FLR Adapter (Recommended)                                        629135-B22
  HPE Ethernet 1Gb 4-port 366FLR Adapter (Recommended)                                        665240-B21
  HPE FlexFabric 10Gb 2-port 533FLR-T Adapter (Recommended)                                   700759-B21
  HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter (Recommended)                                700751-B21
  HPE Ethernet 10Gb 2-port 535FLR-T Adapter (Recommended)                                     817721-B21
  HPE FlexFabric 10Gb 4-port 536FLR-T Adapter (Recommended)                                   764302-B21

                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 42
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Core Options
   HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter (Recommended)                                727054-B21
   HPE Ethernet 10Gb 2-port 562FLR-T Adapter (Recommended)                                   817745-B21
   HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter (Recommended)          867334-B21
   HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter (Recommended)                            817709-B21
   HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (Recommended)                                 874253-B21
   NOTE: Please see the NIC QuickSpecs for Technical Specifications and additional
   information: https://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-
   12.html


HPE InfiniBand - Recommended
  HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (Recommended)            764285-B21
  HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (Recommended)                764284-B21
  HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (Recommended)               879482-B21
  HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (Recommended)                   825110-B21
  HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (Recommended)                   825111-B21
  HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (Recommended)                   872726-B21
  NOTE: Not supported on DL580 Gen10 configurations with more than 24SFF bays when
  system inlet temperature is higher than 25°C.
  HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel Omni-Path Architecture Adapter      829335-B21
  (Recommended)
  HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (Recommended)                            872725-B21
  NOTE: For additional InfiniBand information:
  https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154440


HPE I/O Expansion Options - Recommended
  HPE DL580 Gen10 2x 4-port 16 NVMe Slimline Riser Kit (Recommended)                           878360-B21
  NOTE: HPE DL5x0 Gen10 CPU Mezzanine Board Kit (Recommended) (872222-B21) and requires a 3 or 4
  processor configuration to support all 16 NVMe drives.
  NOTE: Must be selected if more than 8 NVMe drives are selected. It supports upto 16 NVMe drives.NOTE:
  Does not contain any additional PCIe slots.
  HPE DL580 Gen10 6-slot 4 x8/2 x16 2-port 4 NVMe Slimline Primary Riser Kit (Recommended) 872336-B21
  HPE DL580 Gen10 7-slot 4 x8/3 x16 Primary Riser Kit (Recommended)                            878214-B21
  HPE DL580 Gen10 8-slot 6 x8/2 x16 2-port 4 NVMe Slimline Secondary Riser Kit                 872338-B21
  (Recommended)
  NOTE: Secondary riser kit includes the tertiary riser kit.
  HPE DL580 Gen10 9-slot 6 x8/3 x16 Secondary Riser Kit (Recommended)                          872340-B21
  NOTE: Includes the tertiary riser kit.
  NOTE: A maximum of 2 risers can be selected, 1 primary riser and another secondary riser
  (which includes tertiary riser kit).
  NOTE: Risers are optional kits which can be utilized depending on riser and processor
  selection. Refer to "Expansion Slots"? section for additional details on risers.




                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 43
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Core Options
HPE Power Supplies - Recommended
  HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)             830272-B21
  NOTE: Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and
  include a C-14 power inlet connector that can support HPE Power Discovery Services (blue
  connector).
  NOTE: 1600W Power supplies only support high line voltage (200VAC to 240VAC).
  HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit (Recommended)              865414-B21
  NOTE: 4x 800W power supplies must be selected.
  NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a
  standard
  C-14 power inlet connector.
  NOTE: Prior to making a power supply selection it is highly recommended that the HPE
  Power Advisor is run to determine the right size power supply for your server configuration.
  The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor.
  NOTE: All power supplies in a server should match. Mixing Power Supplies is not
  supported.
  NOTE: Option kits contain the specified power supply and a PDU IEC cable.
  NOTE: HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with
  Power Distribution Units (PDUs). Visit HPE power cords for a full list of optional HPE
  power cords.


                                                                               Processor
  Part number                      Card                  Qty support                              PCIe speed
                                                                                support
                        NVIDIA Quadro P6000 GPU
     Q0V76A                                                        4                 All             Gen3
                                Module

     Q0V80A           NVIDIA Tesla P40 24GB Module                 4                 All             Gen3

     Q2N68A           NVIDIA Tesla V100 PCIe 16GB
                                                                   4                 All             Gen3
                                Module
     Q0E21A           NVIDIA Tesla P100 PCIe 16GB
                                                                   4                 All             Gen3
                                Module

   NOTE: Check the power usage via the HPE Power Advisor Tool located at
   http://www.hpe.com/info/hppoweradvisor.
   NOTE: A maximum of four GPU cards can be supported, two in primary riser expansion slots (2 and 4) and
   another two in secondary riser expansion slots (9 and 11). A GPU bracket (P00268-B21) kit is needed to install
   GPUs in slots 4 and 11 and must be be ordered along with the GPU cable kits 871828-B21 (for P6000) or
   871829-B21 (for P40, P100, V100). Refer Expansion Slots sections for additional details on risers.
   NOTE: 1 cable kit supports three GPUs and two cable kits must be ordered when supporting four GPUs.


                                            GPGPU information
      Card           P40          P6000       V100      P100
  Part number       Q0V80A       Q0V76A      Q2N68A    Q0E21A
                                                                          Recommended DL580 Drive bay
      Qty              4            4            4             4
                                                                                configuration


                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                        Page 44
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Core Options
  Processors                                                                                      6+2
                        All         All          All           All       8 SFF        8 NVMe               UMB
  supported                                                                                    Premium
      8SFF             35C         35C           35C           30C        Bay 1

                                                                          Bay 1
      16SFF            35C         35C           35C           30C
                                                                          and 4
                                                                         Bay 1, 4
      24SFF            35C         35C           35C           30C
                                                                          and 5
                                                                         Bay 1, 4,
      32SFF            35C         35C           30C           25C
                                                                         5 and 6
                                                                         Bay 1, 2,
                                                               Not
      40SFF            25C         35C           25C                     4, 5 and
                                                            supported
                                                                             6
                        Not         Not          Not           Not
      48SFF
                     supported   supported    supported     supported

  1 Premium (6+2)      35C         35C           35C           25C                              Bay 2

 1 Premium (6+2) +
                       35C         35C           35C           25C        Bay 1                 Bay 2
      8SFF
 1 Premium (6+2) +                                                        Bay 1
                       35C         35C           35C           25C                              Bay 2
      16SFF                                                               and 4
 1 Premium (6+2) +                                             Not       Bay 1, 4
                       25C         35C           25C                                            Bay 2
      24SFF                                                 supported     and 5
 1 Premium (6+2) +    Not                        Not           Not       Bay 1, 4,
                                   30C                                                           Bay 2
      32SFF        supported                  supported     supported    5 and 6
 1 Premium (6+2) +    Not           Not          Not           Not
      40SFF        supported     supported    supported     supported
                                                                                               Bay 2 and
  2 Premium (6+2)      30C         35C           30C           25C
                                                                                                  3
 2 Premium (6+2) +                                             Not                             Bay 2 and
                       25C         35C           25C                      Bay 1
      8SFF                                                  supported                             3
 2 Premium (6+2) +                                             Not        Bay 1                Bay 2 and
                       25C         35C           25C
      16SFF                                                 supported     and 4                   3
 2 Premium (6+2) +    Not                        Not           Not       Bay 1, 4,             Bay 2 and
                                   30C
      24SFF        supported                  supported     supported     and 6                   3
 2 Premium (6+2) +    Not           Not          Not           Not
      32SFF        supported     supported    supported     supported
                                                               Not                              Bay 1, 2
  3 Premium (6+2)      25C         35C           25C
                                                            supported                            and 3
 3 Premium (6+2) +                                             Not                              Bay 1, 2
                       25C         35C           25C                      Bay 4
      8SFF                                                  supported                            and 3
 3 Premium (6+2) +    Not                        Not           Not        Bay 4                 Bay 1, 2
                                   30C
      16SFF        supported                  supported     supported     and 6                  and 3
 3 Premium (6+2) +    Not           Not          Not           Not
      24SFF        supported     supported    supported     supported

     8NVMe             35C         35C           35C           25C                     Bay 2




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                         Page 45
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Core Options
  8NVMe + 8SFF         35C         35C           35C           25C        Bay 1       Bay 2

                                                               Not        Bay 1
  8NVMe + 16SFF        35C         35C           35C                                  Bay 2
                                                            supported     and 4
                                                               Not       Bay 1, 4
  8NVMe + 24SFF        25C         35C           25C                                  Bay 2
                                                            supported     and 5
                        Not                      Not           Not       Bay 1, 4,
  8NVMe + 32SFF                    25C                                                Bay 2
                     supported                supported     supported    5 and 6
                        Not         Not          Not           Not
  8NVMe + 40SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
     16NVMe
                     supported   supported    supported     supported
                        Not         Not          Not           Not
  16NVMe +8SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
 16NVMe +16SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
 16NVMe +24SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
 16NVMe +32SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
     20NVMe
                     supported   supported    supported     supported
                        Not         Not          Not           Not
  20NVMe+8SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
  20NVMe+16SFF
                     supported   supported    supported     supported
                        Not         Not          Not           Not
  20NVMe+24SFF
                     supported   supported    supported     supported

    Media Bay          35C         35C           35C           30C                                   Bay 4

 Media Bay + 8SFF      35C         35C           35C           30C        Bay 1                      Bay 4

                                                                          Bay 1
 Media Bay + 16SFF     35C         35C           35C           30C                                   Bay 4
                                                                          and 5
                                                                         Bay 1, 5
 Media Bay + 24SFF     35C         35C           30C           25C                                   Bay 4
                                                                          and 6
                                                               Not       Bay 1, 2,
 Media Bay + 32SFF     25C         35C           25C                                                 Bay 4
                                                            supported    5 and 6
                        Not         Not          Not           Not
 Media Bay + 40SFF
                     supported   supported    supported     supported



                                             GPGPU information
      Card            P40         P6000       V100      P100
  Part number        Q0V80A      Q0V76A      Q2N68A   Q0E21A
                                                                            Recommended DL580 Drive bay
      Qty               2           2            2             2
                                                                                  configuration


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 46
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Core Options
   Processor                                                                                    6+2
                      All         All         All           All       8 SFF      8 NVMe                      UMB
   supported                                                                                 Premium
      8SFF            35C        35C          35C          30C        Bay 1

                                                                      Bay 1
     16SFF            35C        35C          35C          30C
                                                                      and 4
                                                                     Bay 1, 4
     24SFF            35C        35C          35C          30C
                                                                      and 5
                                                                     Bay 1, 4,
     32SFF            35C        35C          30C          25C
                                                                     5 and 6
                                                                     Bay 1, 2,
                                                           Not
     40SFF            25C        35C          25C                    4, 5 and
                                                        supported
                                                                         6
                      Not         Not         Not          Not
     48SFF
                   supported   supported   supported    supported

 1 Premium (6+2)      35C        35C          35C          25C                                 Bay 2

 1 Premium (6+2) +
                      35C        35C          35C          25C        Bay 1                    Bay 2
       8SFF
 1 Premium (6+2) +                                                    Bay 1
                      35C        35C          35C          25C                                 Bay 2
      16SFF                                                           and 4
 1 Premium (6+2) +                                         Not       Bay 1, 4
                      25C        35C          25C                                              Bay 2
      24SFF                                             supported     and 5
 1 Premium (6+2) +    Not                     Not          Not       Bay 1, 4,
                                 30C                                                           Bay 2
      32SFF        supported               supported    supported    5 and 6
 1 Premium (6+2) +    Not         Not         Not          Not
      40SFF        supported   supported   supported    supported

 2 Premium (6+2)      30C        35C          30C          25C                              Bay 2 and 3

 2 Premium (6+2) +                                         Not
                      25C        35C          25C                     Bay 1                 Bay 2 and 3
       8SFF                                             supported
 2 Premium (6+2) +                                         Not        Bay 1
                      25C        35C          25C                                           Bay 2 and 3
      16SFF                                             supported     and 4
 2 Premium (6+2) +    Not                     Not          Not       Bay 1, 4,
                                 30C                                                        Bay 2 and 3
      24SFF        supported               supported    supported     and 6
 2 Premium (6+2) +    Not         Not         Not          Not
      32SFF        supported   supported   supported    supported
                                                           Not
 3 Premium (6+2)      25C        35C          25C                                           Bay 1, 2 and 3
                                                        supported
 3 Premium (6+2) +                                         Not
                      25C        35C          25C                     Bay 4                 Bay 1, 2 and 3
       8SFF                                             supported
 3 Premium (6+2) +    Not                     Not          Not        Bay 4
                                 30C                                                        Bay 1, 2 and 3
      16SFF        supported               supported    supported     and 6
 3 Premium (6+2) +    Not         Not         Not          Not
      24SFF        supported   supported   supported    supported

     8NVMe            35C        35C          35C          25C                      Bay 2

  8NVMe + 8SFF        35C        35C          35C          25C        Bay 1         Bay 2


                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                            Page 47
QuickSpecs                                                                     HPE ProLiant DL580 Gen10 Server

Core Options
                                                            Not        Bay 1
 8NVMe + 16SFF        35C         35C          35C                                   Bay 2
                                                         supported     and 4
                                                            Not       Bay 1, 4
 8NVMe + 24SFF        25C         30C          25C                                   Bay 2
                                                         supported     and 5
                       Not                     Not          Not       Bay 1, 4,
 8NVMe + 32SFF                    25C                                                Bay 2
                    supported               supported    supported    5 and 6
                       Not         Not         Not          Not
 8NVMe + 40SFF
                    supported   supported   supported    supported
                                                                               Bay 2 and
    16NVMe            30C         35C          30C          25C
                                                                                  3
                                                            Not                Bay 2 and
  16NVMe +8SFF        25C         35C          25C                     Bay 1
                                                         supported                3
                                                            Not        Bay 1   Bay 2 and
 16NVMe +16SFF        25C         25C          25C
                                                         supported     and 4      3
                       Not                     Not          Not       Bay 1, 4 Bay 2 and
 16NVMe +24SFF                    25C
                    supported               supported    supported     and 6      3
                       Not         Not         Not          Not
 16NVMe +32SFF
                    supported   supported   supported    supported
                                                            Not                   Bay 1, 2
    20NVMe            25C         30C          25C
                                                         supported                 and 3
                                                            Not                   Bay 1, 2
  20NVMe+8SFF         25C         30C          25C                     Bay 4
                                                         supported                 and 3
                       Not                     Not          Not        Bay 4      Bay 1, 2
 20NVMe+16SFF                     25C
                    supported               supported    supported     and 6       and 3
                       Not         Not         Not          Not
 20NVMe+24SFF
                    supported   supported   supported    supported

   Media Bay          35C         35C          35C          30C                                        Bay 4

 Media Bay + 8SFF     35C         35C          35C          30C        Bay 1                           Bay 4

   Media Bay +                                                         Bay 1
                      35C         35C          35C          30C                                        Bay 4
     16SFF                                                             and 5
   Media Bay +                                                        Bay 1, 5
                      35C         35C          30C          25C                                        Bay 4
     24SFF                                                             and 6
   Media Bay +                                              Not       Bay 1, 2,
                      25C         35C          25C                                                     Bay 4
     32SFF                                               supported    5 and 6
   Media Bay +         Not         Not         Not          Not
     40SFF          supported   supported   supported    supported




                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                      Page 48
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Additional Options

Recommended Options
Offering the best combination of performance, value and availability, Recommended Options have been
selected by HPE experts to provide the right technology for a range of workloads and market segments.
Fully integrated into the HPE management and security experience, Recommended Options provide the
best fit with timely availability.

Extended Options
Extended Options provide an extended catalog of products tailored for customers in specific markets or with
specific workloads, requiring the utmost in performance or value. Fully integrated into the HPE management
and security experience, Extended Options represent great value and performance but typically have a
longer lead-time.

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered,
Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for additional information.
iLO Advanced
   HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features                  E6U59ABE
   HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features                  E6U64ABE
   HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features                       BD505A
   HPE iLO Advanced Flexible Quantity License with 3yr Support on iLO Licensed Features              BD506A
   HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features                   BD507A
   HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features                    512485-B21


HPE Converged Infrastructure Management Software
  HPE OneView Physical Media Kit LTU                                                                  E5Y37A
HPE OneView Advanced (with HPE iLO Advanced)
  HPE OneView including 3yr 24x7 Support Physical 1-server LTU                                       E5Y34A
  HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU                                   E5Y35AAE
HPE OneView Advanced (without HPE iLO Advanced)
  HPE OneView w/o iLO including 3yr 24x7 Support 1-server LTU                                       P8B24A
  HPE OneView w/o iLO including 3yr 24x7 Support Track 1-server LTU                                 P8B25A
  HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU                          P8B26AAE
  NOTE: Full licenses of HPE OneView Advanced also provide the right-to-use HPE
  Insight Control without additional charge.
  NOTE: Server provisioning (via 'HPE Insight Control server provisioning') is licensed as
  part of HPE OneView Advanced and provides multi-server OS and driver provisioning.
  NOTE: Licenses ship without media. The HPE OneView Media Kit can be ordered
  separately, or can be downloaded at: https://www.hpe.com/us/en/integrated-
  systems/software.html.
  NOTE: Electronic and flexible-quantity licenses can be used to purchase multiple
  licenses with a single activation key.
  NOTE: Please see the HPE OneView QuickSpecs for technical specifications and
  additional information.



                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 49
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Additional Options


HPE PCIe Workload Accelerator Options
HPE Mixed Use PCIe Workload Accelerator - Recommended
  HPE 1.6TB PCIe x8 Lanes Mixed Use HHHL 3yr Wty Digitally Signed Firmware Card                 877825-B21
  (Recommended)
HPE Mixed Use PCIe Workload Accelerator - Extended
  HPE 4TB PCIe x4 Lanes Read Intensive HHHL 3yr Wty Digitally Signed Firmware Card              877831-B21
  (Extended)
  HPE 3.2TB PCIe x8 Lanes Mixed Use HHHL 3yr Wty Digitally Signed Firmware Card                 877827-B21
  (Extended)
  HPE 6.4TB PCIe x8 Lanes Mixed Use HHHL 3yr Wty Digitally Signed Firmware Card                 877829-B21
  (Extended)
  HPE 750GB PCIe x4 Lanes Write Intensive HHHL 3yr Wty Digitally Signed Firmware Card           878038-B21
  (Extended)
  NOTE: Please see the HPE PCIe Workload Accelerators for ProLiant Servers
  QuickSpecs for Technical Specifications and additional information.


HPE Security - Recommended
  HPE Trusted Platform Module 2.0 Gen10 Option (Recommended)                                      864279-B21
  HPE Gen10 Chassis Intrusion Detection Kit (Recommended)                                         867824-B21
  HPE Bezel Lock Kit (Recommended)                                                                875519-B21
  OEM Gen10 4U Bezel Kit                                                                          869873-B21
HPE Security - Extended
  HPE Gen10 4U Bezel Kit (Extended)                                                               869872-B21
  NOTE: HPE Trusted Platform Module 2.0 Option (864279-B21) works with Gen10 servers with UEFI Mode not
  Legacy Mode. It is not compatible with HPE ProLiant Gen9 servers or earlier generation variants.HPE server
  systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other
  TPM module.


HPE Smart Array Controllers
  The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a
  more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10
  Controllers Data Sheet.




Performance RAID Controllers


                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                     Page 50
QuickSpecs                                                                  HPE ProLiant DL580 Gen10 Server

Additional Options
  NOTE: HPE 96W Smart Storage Battery (up to 20 Devices) with 145mm Cable Kit
  (Recommended)
  (P01366-B21), which supports multiple devices and is sold separately.
  NOTE: Only standup controllers are supported and there is no support for AROC controllers.
  Recommended
  HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in           830824-B21
  Controller (Recommended)
  HPE Smart Array P408e-p SR Gen10 (8 External Lanes/4GB Cache) 12G SAS PCIe Plug-             804405-B21
  in Controller (Recommended)
  HPE Smart Array P824i-p MR Gen10 (24 Internal Lanes/4GB Cache/CacheCade) 12G SAS             870658-B21
  PCIe Controller (Recommended)
Essential RAID Controllers
  Recommended
  HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in            804398-B21
  Controller (Recommended)
  HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in            804394-B21
  Controller (Recommended)

Optional Software
  HPE Smart Array SR Secure Encryption (Data at Rest Encryption/per Server Entitlement)        Q2F26AAE
  E-LTU
  HPE Smart Array SR SmartCache (Single Key/Single Server) LTU                                   D7S26A
  HPE Smart Array SR SmartCache (Single Key/Multiple Servers) LTU                                D7S27A
  HPE Smart Array SR SmartCache (Single Key/Multiple Servers) E-LTU                            D7S27AAE
  NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers.
Optional Upgrades - Recommended
  HPE 96W Smart Storage Battery (up to 20 Devices) with 145mm Cable Kit (Recommended)          P01366-B21
  NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices.
  Is required with performance RAID controllers.


HPE Tape Backup
  NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
  http://www.hpe.com/storage/storeever. For hardware and software compatibility of Hewlett Packard
  Enterprise tape backup products http://www.hpe.com/storage/BURAcompatibility.


HPE Storage Options
Emulex Fibre Channel HBAs - Recommended
  HPE StoreFabric SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter (Recommended)           Q0L13A
  HPE StoreFabric SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter (Recommended)             Q0L14A
  HPE StoreFabric SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter (Recommended)           Q0L11A
  HPE StoreFabric SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter (Recommended)             Q0L12A
QLogic Fibre Channel HBAs - Recommended


                               DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 51
QuickSpecs                                                                HPE ProLiant DL580 Gen10 Server

Additional Options
  HPE StoreFabric SN1100Q 16Gb Single Port Fibre Channel Host Bus Adapter (Recommended)        P9D93A
  HPE StoreFabric SN1100Q 16Gb Dual Port Fibre Channel Host Bus Adapter (Recommended)          P9D94A
  HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter (Recommended)        P9M75A
  HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter (Recommended)          P9M76A
Converged Network Adapter - Recommended
  HPE StoreFabric CN1100R Dual Port Converged Network Adapter (Recommended)                    QW990A
  HPE StoreFabric CN1100R 10GBASE-T Dual Port Converged Network Adapter                        N3U52A
  (Recommended)
  HPE StoreFabric CN1200E 10Gb Converged Network Adapter (Recommended)                         E7Y06A
  HPE StoreFabric CN1200E 10GBASE-T Dual Port Converged Network Adapter                        N3U51A
  (Recommended)


HPE Racks
  NOTE: Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks
  options and rack specifications.
  NOTE: Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks
  options and rack specifications.
  NOTE: Please see the HPE Standard Series Racks QuickSpecs for information on additional racks
  options and rack specifications.


HPE Power Distribution Units (PDUs)
  NOTE: Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on
  these products and their specifications.
  NOTE: Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on
  these products and their specifications.
  NOTE: Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs for information on
  these products and their specifications.
  NOTE: Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for
  information on these products and their specifications.


HPE Uninterruptible Power Systems (UPS)
  NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
  NOTE: Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs for
  information on these products and their specifications.
  NOTE: Please see the HPE Line Interactive Single Phase UPS QuickSpecs for information on these
  products and their specifications.


HPE Rack Options
  NOTE: Please see the HPE KVM Switches web page for information on these products and their
  specifications.
Rail Kits - Recommended
  HPE DL580 Gen10 4U Rail Kit with Cable Management Arm (Recommended)                    872151-B21


                             DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 52
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Additional Options


HPE USB and SD Options
HPE Enterprise Mainstream Flash Media Kits for Memory Cards - Recommended
  HPE 32GB microSD Flash Memory Card (Recommended)                                              700139-B21
  HPE 8GB microSD Flash Memory Card (Recommended)                                               726116-B21
  HPE 8GB microSD Flash USB Drive (Recommended)                                                 737953-B21
  HPE 8GB Dual microSD Flash USB Drive (Recommended)                                            741279-B21
  NOTE: Please see the HPE Flash Media Kits QuickSpecs for additional information.


HPE Support Services
  HPE 3 Year Proactive Care 24x7 DL580 Gen10 Service                                               H9FX1E
  HPE 3 Year Proactive Care 24x7 with DMR DL580 Gen10 Service                                      H9FX2E
  HPE 3 Year Proactive Care Call-To-Repair DL580 Gen10 Service                                     H9FY0E
  HPE 3 Year Proactive Care Call-To-Repair 24x7 with DMR DL580 Gen10 Service                       H9FY1E
  HPE 3 Year Proactive Care 24x7 with CDMR DL580 Gen10 Service                                     H9FX3E
  HPE 3 Year Proactive Care Call-To-Repair with CDMR DL580 Gen10 Service                           H9FY2E
  NOTE: For a full listing of support services available for this server, please visit
  https://ssc.hpe.com/




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 53
QuickSpecs                                                                   HPE ProLiant DL580 Gen10 Server

Memory

Memory Population guidelines




General Memory Population Rules and Guidelines:
 . Install DIMMs only if the corresponding processor is installed.
 . If only one processor is installed in a two-processor system, only half of the DIMM slots are available.
 . To maximize performance, it is recommended to balance the total memory capacity between all installed
   processors.
 . When two processors are installed, balance the DIMMs across the two processors.
 . White DIMM slots denote the first slot to be populated in a channel.
 . Mixing of DIMM types (UDIMM, RDIMM, and LRDIMM) is not supported.


                                DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 54
QuickSpecs                                                                             HPE ProLiant DL580 Gen10 Server

Memory
 . The maximum memory speed is a function of the memory type, memory configuration, and processor
   model.
 . The maximum memory capacity is a function of the number of DIMM slots on the platform, the largest
   DIMM capacity qualified on the platform, the number and model of installed processors qualified on the
   platform.
 . For details on the HPE Server Memory Options Population Rules, visit:
   http://www.hpe.com/docs/memory-population-rules.
 . To realize the performance memory capabilities listed in this document, HPE DDR4 SmartMemory is required.
   For additional information, please see the HPE DDR4 SmartMemory QuickSpecs.
HPE 16GB NVDIMM for Gen10 Servers - Population Rules and Guidelines:
 . Maximum of (12) 16GB NVDIMMs for 2 socket servers and (24) 16GB NVDIMMs for 4 socket servers.
 . If NVDIMM-N interleaving is disabled, then any number of NVDIMM-Ns may be used, and the NVDIMM-
   Ns should be populated in this order:
           o Choose     a CPU with open slots (based on NUMA proximity), if any.
           o Picka channel with two open slots, if any. This keeps the NVDIMM-N from sharing bandwidth with regular
                memory. Populate the white slot.
           o Picka channel with an open slot that already has an NVDIMM-N rather than a regular DIMM, if any. This slot
                must be a black slot. Keep NVDIMM-N traffic away from regular DIMM traffic.
 . If NVDIMM-N interleaving is enabled, then the same interleaving balance restrictions that applied to regular DIMMs also
     apply to the NVDIMM-Ns using the remaining open slots. When assigning the NVDIMM-Ns to those open channels per
     the regular DIMM placement rules:
 .         o It's   important to keep the same number of DIMMs on the same memory controller.
           o Choose     the number of NVDIMM-Ns per CPU based on desired block device size and NUMA locality.
           o Pick    a memory controller with a channel with two open slots, if any.
           o Picka channel with two open slots, if any. This keeps the NVDIMM-N from sharing bandwidth with regular
                memory. Populate the white slot.
 . Please visit the HPE Server Memory Options Population Rules for detailed configuration rules and
   best practices.


                         Memory Speed Table
                         500 Series Platforms - DL580 Gen 10
DIMM Type                                              Register DIMM (RDIMM)
HPE SKU P/N                 815097-B21      876181-B21       815098-B21      835955-B21     815100-B21
                                             HPE 8GB
                             HPE 8GB          (1x8GB)        HPE 16GB        HPE 16GB       HPE 32GB
                          (1x8GB) Single     Dual Rank    (1x16GB) Single  (1x16GB) Dual  (1x32GB) Dual
                          Rank x8 DDR4-      x8 DDR4-      Rank x4 DDR4-   Rank x8 DDR4-  Rank x4 DDR4-
                         2666 CAS-19-19- 2666 CAS- 2666 CAS-19-19- 2666 CAS-19-19- 2666 CAS-19-19-
                           19 Registered      19-19-19      19 Registered   19 Registered  19 Registered
                          Smart Memory      Registered     Smart Memory    Smart Memory   Smart Memory
                                Kit             Smart            Kit             Kit            Kit
SKU                      (Recommended) Memory Kit (Recommended) (Recommended) (Recommended)
Description                                 (Extended)
                                             Dual Rank
DIMM Rank ->             Single Rank (1R)                 Single Rank (1R) Dual Rank (2R) Dual Rank (2R)
                                                 (2R)


                                        DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                             Page 55
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Memory
DIMM
                     8 GB           8 GB           16 GB             16 GB          32 GB
Capacity ->
Voltage               1.2V           1.2V           1.2V              1.2V           1.2V
DRAM depth
                       1G          512 MB            2G                1G             2G
[bit]
DRAM Width
                       x8             x8             x4                x8             x4
[bit]
DRAM Density         8 Gb           4 Gb            8 Gb              8 Gb           8 Gb
CAS Latency         19-19-19       19-19-19       19-19-19          19-19-19       19-19-19
DIMM Native
                   2666 MT/s      2666 MT/s      2666 MT/s         2666 MT/s      2666 MT/s
Speed (MT/s)
Intel® Xeon® Platinum and Gold 81xx/61xx Processors Officially Supported Memory Speed (MT/s)
1 DIMM Per
                   2666 MT/s      2666 MT/s      2666 MT/s         2666 MT/s      2666 MT/s
Channel
2 DIMM Per
                   2666 MT/s      2666 MT/s      2666 MT/s         2666 MT/s      2666 MT/s
Channel
Intel® Xeon® Gold 51xx Processors Officially Supported Memory Speed (MT/s)
1 DIMM Per
                   2400 MT/s      2400 MT/s      2400 MT/s         2400 MT/s      2400 MT/s
Channel
2 DIMM Per                        2400 MT/s
                   2400 MT/s                     2400 MT/s         2400 MT/s      2400 MT/s
Channel

DIMM Type                           Load Reduced (LRDIMM)            Load Reduced (LRDIMM)
HPE SKU P/N                                 815101-B21                     815102-B21
                                 HPE 64GB (1x64GB) Quad Rank HPE 128GB (1x128GB) Octal Rank
                                   x4 DDR4-2666 CAS-19-19-19      x4 DDR4-2666 CAS-22-19-19 3DS
                                  Load Reduced Smart Memory          Load Reduced Memory Kit
SKU Description                        Kit (Recommended)                 (Recommended)
DIMM Rank ->                              Quad Rank (4R)                  Octal Rank (8R)
DIMM Capacity ->                               64 GB                         128 GB
Voltage                                         1.2V                           1.2 V
DRAM depth [bit]                                 2G                             2G
DRAM Width [bit]                                 x4                             x4
DRAM Density                                    8 Gb                           8 Gb
CAS Latency                                   19-19-19                       22-19-19
DIMM Native Speed (MT/s)                     2666 MT/s                      2666 MT/s
Intel® Xeon® Platinum and Gold 81xx/61xx Processors Officially Supported Memory Speed (MT/s)
1 DIMM Per Channel                           2666 MT/s                      2666 MT/s
2 DIMM Per Channel                           2666 MT/s                      2666 MT/s
Intel® Xeon® Gold 51xx Processors Officially Supported Memory Speed (MT/s)
1 DIMM Per Channel                           2400 MT/s                      2400 MT/s
2 DIMM Per Channel                           2400 MT/s                      2400 MT/s
For details on the HPE Server Memory speed, visit: https://www.hpe.com/docs/memory-speed-table



Standard and Maximum Memory Capacity (Pre-configured Models)




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 56
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Memory
                                                                                     Standard Memory
 Pre Configured                                     Maximum Memory Plus
                        Standard Memory                                            Replaced with Optional
     Models                                           Optional Memory
                                                                                          Memory
       5120              64 GB (4 x16 GB)             384 GB (24 x16 GB)            6144GB (48 x128 GB)
       6148              128 GB (8 x16 GB)            384 GB (48 x16 GB)            6144GB (48 x128 GB)
       8164              256 GB (8 x32 GB)            1536 GB (48 x32 GB)           6144GB (48 x128 GB)
DDR4 memory options part number decoder
  NOTE: Capacity references are rounded to the common gigabyte (GB) values.

    4 GB = 4,096 MB
    8 GB = 8,192 MB
    16 GB = 16,384 MB
    32 GB = 32,768 MB
    64 GB = 65,536 MB
    128 GB = 131,072 MB
  For more information on memory, please see the Memory Quickspecs: HPE DDR4 SmartMemory




                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                      Page 57
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Storage

24 SFF (+2 SFF) hot-plug drive model and 16 NVMe SSDs with Universal Media Bay




                              DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 58
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Technical Specifications

System Unit
Dimensions                 17.48cm x 44.55cm x 75.18cm
                           6.88 x 17.54 x 29.60 in
(H x W x D)
(with bezel)
Weight                     51.71 kg              Maximum: (all hard drives, power supplies, DIMMs and
                           114 lb                processors installed)
(approximate)
                           28.12 kg              Minimum: (one processor, one standard heatsink, one air
                           62 lb                 baffle, one hard drive, two power supply, one DIMM, one
                                                 NIC one rail kit with CMA and one primary riser installed)
Input Requirements         Rated Input Voltage   100 - 127 VAC, 200 - 240 VAC, 240VDC for China Only
                                                 (800W Platinum PS only)
(per power supply)
                                                 200 - 240 VAC, 240 VDC for China only (1600W PS only)
                           Rated Input Current   9.4 A (100 VAC), 4.5 A (200 VAC), 3.8 A at 240VDC for China
                                                 only (800W Platinum PS only)
                                                 8.7 A at 200 VAC, 7.2 A at 240 VAC - (1600W PS only)
                           Rated Input Frequency 50 to 60 Hz (Not applicable for VDC ranges)
                           Maximum Rated Input 940 W (100 VAC), 900 W (200VAC), 912 W at 240 VDC for
                           Power                 China only - (800W Platinum PS only)
                                                 1734 W at 200 VAC 1720 W at 240 VAC - (1600W PS only)
BTU Rating                 Maximum               3207 BTU/hr at 100 VAC, 3071 BTU/hr at 200 VAC, 3112
                                                 BTU/hr at 240 for China only - (800W Platinum PS only)
                                                 5918 BTU/hr at 200 VAC, 5884 BTU/hr at 240 VAC - (1600W
                                                 PS only)
Power Supply Output        Rated Steady-State    800 W at 100 VAC to 127 VAC input, 800 W at 200 VAC to
                           Power                 240 VAC input, 800 W at 240 VDC input for China only -
(per power supply)
                                                 (800W Platinum PS only)
                                                 1600 W at 200 VAC to 240 VAC input, 1600 W at 240 VDC
                                                 input - (1600W PS only)
                           Maximum Peak Power 800 W at 100 VAC to 127 VAC input, 800 W at 200 VAC to
                                                 240 VAC input, 800 W at 240 VDC input for China only -
                                                 (800W Platinum PS only)
                                                 2200 W for 1ms (turbo mode) at 200 VAC to 240 VAC input -
                                                 (1600W PS only)
                                                 NOTE: To review typical system power ratings use the HPE
                                                 Power Advisor which is available online located at url:
                                                 http://www.hpe.com/info/hppoweradvisor.
System Inlet               Standard Operating    10° to 35°C (50° to 95°F) at sea level with an altitude derating
                           Support               of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea
Temperature
                                                 level to a maximum of 3050 m (10,000 ft), no direct sustained
                                                 sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The
                                                 upper limit and rate of change may be limited by the type and
                                                 number of options installed. System performance during
                                                 standard operating support may be reduced if operating with a
                                                 fan fault or above 30°C (86°F).
                           Extended Ambient      For approved hardware configurations, the supported system
                           Operating Support     inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35°


                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 59
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Technical Specifications
                                                   to 40°C (95° to 104°F) at sea level with an altitude derating of
                                                   1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m
                                                   (2953 ft) to a maximum of 3050 m (10,000 ft). The approved
                                                   hardware configurations for this system are listed at the
                                                   URL:
                                                   http://www.hpe.com/servers/ashrae

                                                   For approved hardware configurations, the supported system
                                                   inlet range is extended to be: 40° to 45°C (104° to 113°F) at
                                                   sea level with an altitude derating of 1.0°C per every 125 m
                                                   (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum
                                                   of 3050 m (10,000 ft). The approved hardware configurations
                                                   for this system are listed at the URL:
                                                   http://www.hpe.com/servers/ashrae

                                                     System performance may be reduced if operating in the
                                                     extended ambient operating range or with a fan fault.
                           Non-operating             -30° to 60°C (-22° to 140°F). Maximum rate of change is
                                                     20°C/hr (36°F/hr).
Relative Humidity          Operating                 8% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet
                                                     bulb temperature, non-condensing.
(non-condensing)           Non-operating             5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum
                                                     wet bulb temperature, non-condensing.
Altitude                   Operating                 3050 m (10,000 ft). This value may be limited by the type and
                                                     number of options installed. Maximum allowable altitude
                                                     change rate is 457 m/min (1500 ft/min).
                           Non-operating             9144 m (30,000 ft). Maximum allowable altitude change rate is
                                                     457 m/min (1500 ft/min).
Acoustic Noise             Listed are the declared A-Weighted sound power levels (LWAd) and declared average
                           bystander position A-Weighted sound pressure levels (LpAm) when the product is
                           operating in a 23°C ambient environment. Noise emissions were measured in
                           accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296
                           (ECMA 109). The listed sound levels apply to standard shipping configurations.
                           Additional options may result in increased sound levels. Please have your HPE
                           representative provide information from the HPE EMESC website for further
                           technical details regarding the configurations listed below.
                           Product                   Entry               Base                Performance
                           Configuration
                           Idle - LWAd               5.4 B               5.4 B               5.3 B
                           Idle - LpAm               37 dBA              36 dBA              36 dBA

                           Operating - LWAd          5.8 B              6.1 B                 6.1 B
                           Operating - LpAm          39 dBA             43 dBA                44 dBA
                           NOTE: Acoustics levels presented here are generated by the test configuration
                           only. Acoustics levels will vary depending on system configuration. Values are
                           subject to change without notification and are for reference only.



                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                          Page 60
QuickSpecs                                                                    HPE ProLiant DL580 Gen10 Server

Technical Specifications
Regulatory                 To view the regulatory information for your product, view the Safety and
                           Compliance Information for Server, Storage, Power, Networking, and Rack
Information
                           Products, available at the Hewlett Packard Enterprise Support Center:
                           http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts


Please refer to the appropriate QuickSpecs listes below for technical specifications on controllers.
   For information on the HPE Smart Array E208i-p SR Gen10 Controller please refer to their QuickSpecs.
   For information on the HPE Smart Array E208e-p SR Gen10 Controller please refer to their QuickSpecs.
   For information on the HPE Smart Array P408i-p SR Gen10 Controller please refer to their QuickSpecs.
   For information on the HPE Smart Array P408e-p SR Gen10 Controller please refer to their QuickSpecs.
   For information on the HPE Smart Array P824i-p MR Gen10 Controller please refer to their QuickSpecs.



Environment-     Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling
friendly         programs, in many geographic areas, for our products. Products returned to Hewlett
Products and     Packard Enterprise will be recycled, recovered or disposed of in a responsible manner.
Approach -
                 The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information
End-of-life
                 for each product type for use by treatment facilities. This information (product disassembly
Management
                 instructions) is posted on the Hewlett Packard Enterprise web site. These instructions may
and Recycling
                 be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard
                 Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise
                 equipment.




                                 DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                       Page 61
QuickSpecs                                                              HPE ProLiant DL580 Gen10 Server

Summary of Changes

Date          Version      Action      Description of Change
              History
06-Aug-2018   Version 10   Changed     Updated the list of supported operating systems.
                                       Configuration Information - Factory Integrated Models, Core
                                       Options, and Additional Options were revised.
                           Added       Added drive population guideline table with GPUs.
02-Jul-2018   Version 9
                           Added       Added HPE iLO Advanced 1-server License with 1yr Support on iLO
04-Jun-2018   Version 8
                                       Licensed Features.
                                       New HPE Smart Array P824i-p MR Gen10 (24 Internal Lanes/4GB
                                       Cache/CacheCade) 12G SAS PCIe Controller was added.
                                       New 375GB NVMe WI drive and 750GB PCIE accelerator were
                                       added.
                           Changed     Configuration Information - Factory Integrated Models, Core
                                       Options, Additional Options, Service and Support, and Memory
                                       were revised.
                           Removed     Obsolete SKUs were removed from the QuickSpecs.
02-Apr-2018   Version 7    Changed     Standard Features, Configuration Information - Factory Integrated
                                       Models and Core Options were revised.
                                       SKUs descriptions were updated.
05-Mar-2018   Version 6    Changed     Front view image, Expansion Slots, Internal Storage Devices,
                                       Standard Features, and Storage section were revised.
                           Added       Added new SSD offering.
05-Feb-2018   Version 5
                           Changed     GPU slots and Maximum Internal Storage were revised.
                                       Core Options and Additional Options were revised.
                           Removed     Obsolete SKUs were removed from the QuickSpecs.
                           Changed     Configuration Information - Factory Integrated Models and Core
18-Dec-2017   Version 4
                                       Options were revised.
                           Added       Added support for new core boosting Intel® Xeon® Processors 6143
04-Dec-2017   Version 3
                                       and 8165.
                                       Added support for up to 24 16GB NVDIMM.
                           Changed     Processors, Memory, and Acoustic Noise were revised.
16-Oct-2017   Version 2    Added       Added note - 1600W Power supplies only support high line voltage
                                       (200VAC to 240VAC) - to power supplies.
                                       Added HPE Support Services.
                                       Added acoustic noise to the Technical Specifications section.
25-Sep-2017   Version 1    New         New QuickSpecs.




                           DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                    Page 62
QuickSpecs                                                                 HPE ProLiant DL580 Gen10 Server

Summary of Changes


Sign up for updates
                         © Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is
                         subject to change without notice. The only warranties for Hewlett Packard Enterprise
                         products and services are set forth in the express warranty statements accompanying such
                         products and services. Nothing herein should be construed as constituting an additional
                         warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or
                         omissions contained herein.

                         Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other
                         countries.

                         Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the
                         Microsoft group of companies.

                         For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less

                         a00021850enus - 16053 - North America - V10 - 6-August-2018




                      DA - 16053 U.S. QuickSpecs — Version 10 — 8/6/2018                                    Page 63
                          DA - 16053 U.S. QuickSpecs — Version 7 — 4/3/2018                                  Page 5