X9DBL-3F
X9DBL-3F

سوپرمایکرو X9DBL-3F

 Dual socket B2 (LGA 1356) supports
Intel® Xeon® processor E5-2400 v2
 Intel® C606 chipset
 Up to 384GB DDR3 1600MHz LRDIMM
/ 192GB RDIMM; 6x DIMM slots
 Expansion slots: 1 PCI, 3 PCI-E 3.0 x8
1 PCI-E 3.0 x16, 1 PCI-E 3.0 x4 (in x8)
 Intel® 82574L GbE LAN, 2 ports
4x SATA2 and 2x SATA3 ports
 8x SAS/SATA2 ports from C606
 Integrated IPMI 2.0 and KVM wit+h
Dedicated LAN
7x USB 2.0 ports
(2 rear, 4 via header + 1 Type A)

محصولات مشابه:

 

Product SKUs
MBD-X9DBL-3F -O
  • X9DBL-3F (Standard Retail Pack)
MBD-X9DBL-3F -B
  • X9DBL-3F (Bulk Pack)
 
Physical Stats
Dimensions
  • 12" x 10" (30.48cm x 25.4cm)
 
Processor/Cache
CPU
  • Intel® Xeon® processor E5-2400   and E5-2400 v2 (up to 95W TDP **)
  • Dual Socket B2 (LGA 1356)
Cache
  • Up to 25MB
System Bus
  • QPI up to 8 GT/s
  ** Motherboard supports this maximum TDP. Please verify your system can thermally support
 
System Memory
Memory Capacity
  • 6x 240-pin DDR3 DIMM slots
  • Up to 384GB DDR3 ECC LRDIMM
  • Up to 192GB DDR3 ECC Registered memory (RDIMM)
  • Up to 48GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type
  • 1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
  • Support ECC and non-ECC UDIMMs 

    * Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.

DIMM Sizes
  • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
    64GB LRDIMM
Memory Voltage
  • 1.5 V, 1.35 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
Chipset
  • Intel® C606 chipset
SATA
  • SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
  • SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
SAS
  • SAS from C606
  • RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Nuvoton WPCM450 BMC
Network Controllers
  • Intel® 82574L Gigabit Ethernet
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • 1x Realtek RTL8201F PHY (dedicated IPMI)
Video
  • Matrox G200eW
 
Input / Output
SATA
  • 2x SATA 3.0 ports (6Gb/s)
  • 4x SATA 2.0 ports (3Gb/s)
SAS
  • 8x SAS/SATA2 ports
LAN
  • 2x RJ45 Gigabit Ethernet LAN ports
  • 1x RJ45 Dedicated IPMI LAN port
USB
  • 7x USB 2.0 ports total
    (2 rear + 4 via header + 1 Type A)
Video
  • 1x VGA port
Serial Port / Header
  • 2x Fast UART 16550 ports / 1 rear and 1 header
DOM
  • 1 DOM (Disk on Module) power connector
Chassis (Optimized for X9DBL-3F )
1U Chassis
  • CSE-113MTQ-600CB
  • CSE-813MTQ-350C
  • CSE-813MTQ-441CB
  • CSE-813MTQ-R400CB
2U Chassis
  • CSE-823TQ-653B
3U Chassis
  • CSE-833T-653B
Tower / 4U Rackmount
  • CSE-842TQ-665B
  • CSE-842TQ-865B
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
 

 
Expansion Slots
PCI-Express
  • 1x PCI-E 3.0 x16
  • 3x PCI-E 3.0 x8
  • 1x PCI-E 3.0 x4 (in x8)
  • 1x PCI-32

    (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)

 
System BIOS
BIOS Type
  • 64Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.3
  • ACPI 1.0 / 2.0 / 3.0 / 4.0
  • USB Keyboard support
  • SMBIOS 2.7.1
  • UEFI 2.3.1
 
Management
Software
  • SuperDoctor® III
  • Watch Dog
  • NMI
  • IPMI 1.5 / 2.0
Power Configurations
  • ACPI / APM Power Management
  • Power-on mode for AC power recovery
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
  • 5+1 Phase-switching voltage regulator
FAN
  • Six 4-pin fan headers with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 6x Fan Connectors
  • Thermal Monitor 2 (TM2) support
  • PECI
LED
  • CPU / System Overheat LED
  • Suspend static indicator LED
  • UID/Remote UID
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • RoHS, Halogen Free
  • Dual Cooling Zones
 
Operating Environment
Operating Temperature Range
  • 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range
  • -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range
  • 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range
  • 5% - 95% (non-condensing)
Parts List (retail)
  Part Number Qty Description
X9DBL-3F MBD-X9DBL-3F 1 X9DBL-3F Motherboard
I/O Cables CBL-0044L 8 SATA CABLE 61CM FLAT S-S PBF
I/O Shield MCP-260-00027-0N 1 Std I/O shield for server MB with 3rd LAN + 4xLAN
Optional Parts List
  Part Number Qty Description
Heat Sink
(optional, not included)
- - CPU Heat Sink reference
ویژگی های سیستم :
حافظه :
ذخیره سازی :
کارت های کنترل :
ابعاد و وزن :
مدیریت سرور :