
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Overview
How are you going to scale out to petabytes with your current infrastructure?
Big data, largely unstructured such as messages, images, readings from sensors, and GPS signals from cell phones, are growing at an exponential
HP ProLiant SL4540 Gen8 Server solves the traditional structured database problems when dealing with big data. Implementing a scale-up infrastructure
will invariably result in challenges of data center capacity, spiraling energy costs, infrastructure complexity and inefficiencies because today's siloe
infrastructure is not optimized for scale-out server workloads driven by big data. The SL4540 Gen8 Server is a server purpose-built for big data. A highly
efficient converged design that delivers the right combination of capacity and performance, in the least amount of space and at lower cost, with th
reliability and manageability you expect from HP ProLiant Gen8, the world's most intelligent servers.
SL4540 Gen8 1x60 Model
SL4540 Gen8 1x60 Model Front View: SL4540 Gen8 1x60 Model Rear View:
1. Hood Cover 1. Fan LED
2. LFF 3.5" hard drives (60) 2. System fans
3. SFF 2.5" hard drives on node (2) 3. I/O Module
4. LFF hard drives connected to storage controller (Port 1i) 4. Management Module
5. LFF hard drives connected to storage controller (Port 2i) 5. SL Advanced Power Manager Distribution Module (SL-
APMD)connector
6. Hard drive backplane health LED 6. iLO connector
7. Storage UID 7. Server Serial Port
8. Hard drive LED display boards 8. 10Gb Ethernet SFP+ port
NOTE: Available only when 10G I/O module is ordered. 1G I/O Module
has 2x1Gb Ethernet ports only.
9. Node ejection button 9. 10Gb Ethernet QSFP port
NOTE: Available only when 10G I/O module is ordered. 1G I/O Module
has 2x1Gb Ethernet ports only.
10. Node USB connectors (2) 10. 2 X 1Gb Ethernet ports
11. Node video connector (VGA port) 11. Low profile PCI express slot
NOTE: Available only when the optional HP SL454x Storage
Mezzanine to PCIe Enablement Kit is ordered
12. Node power ON/Standby button and system power LED 12. Power supplies
13. Node health LED 13. Power supply LED
14. Node UID LED button
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 1
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Overview
SL4540 Gen8 2x25 model
SL4540 Gen8 2x25 Model Front View: SL4540 Gen8 2x25 Model Rear View:
1. Server Node 1 1. Fan LED
2. SFF 2.5" hard drives on node (2) 2. System fans
3. Hard drive backplane health LED 3. I/O Module Server Node 1
4. Storage UID 4. Management Module
5. LFF hard drives 5. SL Advanced Power Manager Distribution Module (SL-APMD)
connector
6. Server Node 2 6. iLO connector
7. Hard drive LED display boards 7. Server Serial Port
8. Node video connector (VGA port) 8. 10Gb Ethernet SFP+ port
NOTE: Available only when 10G I/O module is ordered. 1G I/O Module
has 2x1Gb Ethernet ports only.
9. Node USB connectors (2) 9. 10Gb Ethernet QSFP port
NOTE: Available only when 10G I/O module is ordered. 1G I/O Module
has 2x1Gb Ethernet ports only.
10. Node power ON/Standby button and system power LED 10. 2 X 1Gb Ethernet ports
11. Node health LED 11. Low profile PCI express slot
NOTE: Available only when the optional HP SL454x Storage
Mezzanine to PCIe Enablement Kit is ordered
12. Node ejection button 12. Power supplies
13. Node UID LED button 13. Power supply LED
14. I/O Module Server Node 2
SL4540 Gen8 3x15 model
SL4540 Gen8 3x15 Model Front View: SL4540 Gen8 3x15 Model Rear View:
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 2
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Overview
1. Server Node 1 1. Fan LED
2. SFF 2.5" hard drives on node (2) 2. System fans
3. Hard drive backplane health LED 3. I/O Module Server Node 1
4. Storage UID 4. Management Module
5. LFF hard drives connected to Server Node 1 (15) 5. SL Advanced Power Manager Distribution Module (SL-APMD)
connector
6. Server Node 2 6. iLO connector
7. LFF hard drives connected to Server Node 2 (15) 7. Serial Port
8. Server Node 3 8. 10Gb Ethernet SFP+ port
NOTE: Available only when 10G I/O module is ordered. 1G I/O Module
has 2x1Gb Ethernet ports only.
9. LFF hard drives connected to Server Node 3 (15) 9. 10Gb Ethernet QSFP port
NOTE: Available only when 10G I/O module is ordered. 1G I/O Module
has 2x1Gb Ethernet ports only.
10. Hard drive LED display boards 10. 2 X 1Gb Ethernet ports
11. Node video connector (VGA port) 11. Low profile PCI express slot
NOTE: Available only when the optional HP SL454x Storage
Mezzanine to PCIe Enablement Kit is ordered
12. Node USB connectors (2) 12. Power supplies
13. Node power ON/Standby button and system power LED 13. Power supply LED
14. Node health LED 14. I/O Module Server Node 3
15. Node ejection button
16. Node UID LED button
What's New
Intel® Xeon® Processor E5-2400 v2 Series
HP SL4500 H220 Host Bus Adapter
VMware support for H220 Host Bus Adapter
HP DDR3-1600 Low Voltage Memory Kit
Hard Drive zoning via two P420i controller
32GB Low Volatage Memory Kit
6TB LFF HDD's
48VDC Power Supply Kit
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 3
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory Integrated
Models" section.
Processor E5-2400 v2 Series
One model of the following Ten-Core Processors
per server node
Intel® Xeon® E5-2470v2 (2.4GHz/10core/25MB/95W) Processor
Intel® Xeon® E5-2450Lv2 (1.7GHz/10core/25MB/60W) Processor
Eight-Core Processors
Intel® Xeon® E5-2450v2 (2.5GHz/8core/20MB/95W) Processor
Intel® Xeon® E5-2440v2 (1.9GHz/8core/20MB/95W) Processor
Six-Core Processors
Intel® Xeon® E5-2430v2 (2.5GHz/6core/15MB/80W) Processor
Intel® Xeon® E5-2430Lv2 (2.4GHz/6core/15MB/60W) Processor
Intel® Xeon® E5-2420v2 (2.2GHz/6core/15MB/80W) Processor
Quad-Core Processors
Intel® Xeon® E5-2407v2 (2.4GHz/4core/10MB/80W) Processor
E5-2400 series
Eight-Core Processors
Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo2- 5/5/6/6/7/7/8/8) Turbo+
Intel® Xeon® E5-2470 (2.30GHz/8-core/20MB/8GT-s QPI/95W, DDR3-1600, HT, Turbo2- 5/5/6/6/7/7/8/8)
Six-Core Processors
Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)Turbo
Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/7.2GT-s QPI/60W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Intel® Xeon® E5-2440 (2.40GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-1333, HT, Turbo2- 3/3/4/4/5/5)
Quad-Core Processors
Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/6.4GT-s QPI/80W, DDR3-1066)
NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading Technology
NOTE: Turbo 2 indicates the maximum potential bin increments when using Intel® Turbo Boost Technology, with 8
4, 3, 2 and 1 cores active or with 6, 5, 4, 3, 2 and 1 as applicable.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the qu
and type of DIMMs installed (options for 1333 and 1066MHz memory speed are available).
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel® C600 Chipset E5-2400 Series, the letter preceding the model number indicates the Product Li
E5, E7); 2400x v#, 2 = number of CPUs in a Node, 4 is socket/segment designation, 00 = Processor SKU, x = L for lo
SKUs and v# (not yet designated) = version number
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 4
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
Cache Memory 25MB (1x25MB) Level3
NOTE: For Ten-core processors.
One of the following
depending on model 20MB (1x20MB) Level3
NOTE: For Eight-core processors.
15MB (1x15MB) Level3
NOTE: For Six-core processors.
10MB (1x10MB) Level3
NOTE: For Quad-core processors.
Chipset Intel® C600 Series Chipset
Intel® E5-2400 v2 Processor Family
Intel® E5-2400 Processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
Upgradeability Upgradeable to two processors
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2400 to E5-2400 v2. Please contact HP Techn
Sales (http://www.hp.com/support), your local HP Re-seller, or reference the following Customer Advisory:
ProLiant Servers-Instructions for Upgrading an HP ProLiant Gen8 Server from an Intel Xeon Processor E5-2400 to
Xeon Processor E5-2400v2, regarding critical details before upgrading. An explanation of requirements and
limitations are provided.
On System Management HP iLO (Firmware: HP iLO 4)
Processor NOTE: For more information, visit: http://www.hp.com/go/ilo.
Memory Protection Advanced ECC (multi-bit error protection)
Online Spare
Lock Step Mode
Memory Type HP SmartMemory
DDR3 Registered (RDIMM)
Dedicated to each server
node DIMM Slots Available 12 DIMM Slots available
Maximum (RDIMM) (per 384GB (12 x 32GB) Registered memory configurations
server tray)
NOTE: HP SmartMemory is required to realize the memory performance improvements and enhanced functionalit
in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: HP certified SmartMemory must be used to guarantee full 1600 MHz speeds.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1600, 1333M
1066MHz. Please see the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 5
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
Network Controller HP Ethernet 1Gb 2-port 361i
One of the following HP Ethernet 1Gb 2-port 361i and HP Ethernet 10Gb 2-Port 544i Adapter
dedicated to each server
NOTE: Dual port ConnectX-3 10GbE or QDR IB
node
NOTE: Network controller is hosted in the I/O Module
Expansion Slots
Primary Riser Bus
Expansion Slots # Technology Connector Width Form Factor Notes
Dedicated to each Width*
server node 1 PCIe 2.0 X8 X8 Low profile slot
*Indicates the number of physical electrical lanes running to the connector.
NOTE: One PCIe 2.0 low profile expansion slot is enabled by HP Svr Storage Mezz to PCIe Option Kit 682632-B21 for adding one of the expansio
including an HP IO accelerator, networking options or external storage controller options.
NOTE: Expansion Slot is hosted in the I/O Module.
HP Server ROM HP ROM (Read Only Memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts
to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase
of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally,
these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in
diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
www.hp.com/support/rbsu.
Storage Controllers HP Dynamic Smart Array B120i SATA RAID
Dedicated to each server NOTE: HP Dynamic Smart Array B120i SATA RAID is located on the server node and controls only the two small fo
node factor (SFF/2.5") hard drives on the server node itself.
HP SL4500 H220 Host Bus Adapter
NOTE: HP SL4500 H220 HBA is located in the I/O Module, which is located at the rear of the SL4540 chassis and co
the large form factor (LFF/ 3.5") hard drives.
HP Smart Array P420i Controller
NOTE: HP Smart Array P420i is located in the I/O Module, which is located at the rear of the SL4540 chassis and co
the large form factor (LFF/ 3.5") hard drives.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 6
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
Internal Storage Devices Diskette Drive Via USB port, external support only
Optical Drive Via USB port, external support only
Hard Drives None ship standard
Drive Bays 2 SFF drive bays total for each node
60 LFF drive bays total in chassis for a 1x60 model
50 LFF drive bays total in chassis for a 2x25 model (25 drives per node)
45 LFF drive bays total in chassis for a 3x15 model (15 drives per node)
Maximum Internal Storage 1x60 Model - 60 LFF Drives per node
Hot Plug LFF SAS 360.0TB 60 x 6TB
Hot Plug LFF SATA 360.0TB 60 x 6TB
Hot Plug SFF SATA 2.0TB 2 x 1TB
Hot Plug LFF SATA SSD 48.0TB 60 x 800GB
Hot Plug SFF SATA SSD 1.6TB 2 x 800GB
NOTE: The node consists of two SFF (2.5") hard drive bays on the front of the server
NOTE: The main storage section in the chassis has 60 LFF (3.5") hard drive bays and they can be populated with an
combination of SAS, SATA, or SATA SSD drives to achieve desired performance.
2x25 Model - 25 LFF Drives per node
Hot Plug LFF SAS 300.0TB 50 x 6TB
Hot Plug LFF SATA 300.0TB 50 x 6TB
Hot Plug SFF SATA 4.0TB 4 x 1TB
Hot Plug LFF SATA SSD 40.0TB 50 x 800GB
Hot Plug SFF SATA SSD 3.2TB 4 x 800GB
NOTE: Each node contains two SFF (2.5") hard drive bays on the front of the node.
NOTE: The main storage section in the chassis has 50 LFF (3.5") hard drive bays, 25 bays per node, and they can b
populated with any combination of SAS, SATA, or SATA SSD drives to achieve desired performance
3x15 Model - 15 LFF Drives per node, 45 LFF Drives per chassis
Hot Plug LFF SAS 270.0TB 45x 6TB
Hot Plug LFF SATA 270.0TB 45 x 6TB
Hot Plug SFF SATA 6.0TB 6 x 1TB
Hot Plug LFF SATA SSD 36.0TB 45 x 800GB
Hot Plug SFF SATA SSD 4.8TB 6 x 800GB
NOTE: Each node contains two SFF (2.5") hard drive bays on the front of the node.
NOTE: The main storage section in the chassis has 45 LFF (3.5") hard drive bays, 15 bays per node, and they can b
populated with any combination of SAS, SATA, or SATA SSD drives to achieve desired performance.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 7
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
Interfaces Network RJ-45 Two 1GbE NIC ports (available in both 1GbE and 10GbE I/O Module)
NOTE: Only one of either the 1GbE I/O Module or 10GbE I/O Module can be connected
Dedicated to each server node
the node.
SFP+ connector One 10GbE SFP+ connector
NOTE: 10GbE SFP+ and 10GbE/40Gb IB QSFP are additional networking interfaces
available using optional 10GbE I/O Module.
QSFP connector One 10GbE/40GbIB QSFP connector
NOTE: 10 Gb Ethernet on the QSFP port requires the use of the QSFP to SFP+ adapte
655874-B21
NOTE: IB supported with addition of HP IB Enablement Kit
USB 2 front (external)
Serial 1 rear (external on I/O Module)
Video 1 front (external)
Management Network Port 10/100 Mb Dedicated (Optionally a 1GbE port can be dedicated to iLO)
NOTE: Management port is shared
Health LED 2 front
Power 1 front
UID for node 1 front per node and 1 rear on management module)
UID for storage 1 per display board
Industry Standard ACPI 2.0b Compliant
Compliance PCIe 2.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
USB 1.1 and 2.0 Compliant
SMBIOS 2.6.1
Server Power Cords 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant SL servers are primarily connected to PDU's in data center racks so they ship standard with on
power cord (416151-B21). If a user wishes to power a ProLiant SL server using a 110V receptacle (NEMA-15), the
power cord must be ordered separately.
NOTE: If customers require a power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
Power Specifications To review typical system power ratings use the HP Power Advisor which is available via the online tool
located at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor.
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 8
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
Common Slot Power HP's Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of ProLiant a
Integrity servers, as well as HP Storage solutions, and are designed to provide the highest power supply efficienc
Supply
degrading system performance. HP CS power supplies are tested by the Electric Power Research Institute (EPRI) a
certified through the ECOS 80 Plus power supply program. HP CS power supply options provide efficiency ratings
94% and are available in two power output options - 750W, and 1200W - allowing the user to "right-size" a powe
for their specific server configuration. All HP Common Slot power sources are UL, CE Mark Compliant, hot-
plug and support redundant configurations. It is highly recommended that you use the HP Power Advisor in
defining the "Right-Size" power supply for your needs. HP Power Advisor can be accessed at:
www.hp.com/go/hppoweradvisor.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same
output and efficiency rating. If non-matched power supplies are inserted you will get errors and operation
will fail.
NOTE: The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and consumers
effort to bring energy efficient technology solutions to the marketplace. 80 Plus independently tests power suppl
efficiency and publicly posts the results on www.80Plus.org.
NOTE: Redundant Power: Optional redundant power supplies can be purchased through power supply option
kits (see Power Supplies for part numbers).
System Fans System ships standard with 5 Dual fan modules.
Operating Systems and Microsoft Windows Server
Canonical Ubuntu
Virtualization Software
Red Hat Enterprise Linux (RHEL)
Support for ProLiant
SUSE Linux Enterprise Server (SLES)
Servers
VMware
NOTE: Only 64-bit versions of these operating systems are supported.
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server including how to purchase from HP,
please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/support/SL4540Gen8
Graphics (per node) Integrated Matrox G200 video standard
1280 x 1024 (32 bpp)
1920 x 1200 (16 bpp)
Form Factor 4.3U form factor
NOTE: Can be racked as either a 5U tall chassis or as three chassis in 13U when purchased with a Rack Adapter K
681677-B21)
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 9
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
On System Management HP iLO Management Engine HP iLO Management Engine is a comprehensive set of embedded management feature
supporting the complete lifecycle of the server, from initial deployment, through ong
management, to service alerting and remote support. HP iLO Management Engine com
standard on all HP ProLiant Gen8 servers. The HP iLO Management Engine portfolio
includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is the
core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring
and alerting capability without OS agents, that starts working the
moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for increased
stability and shorter downtimes; 100% configuration history; Health and servic
alerts and easy export and upload to Service and Support.
HP Intelligent Provisioning: Lets customers provision and configure a
single server without any separate media. No more SmartStart CDs or
Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot process
(also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
www.hp.com/go/intelligentprovisioning for additional
information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
www.hp.com/go/spp to get firmware and software updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage
your server anytime from anywhere from select smartphones and mobile
devices. For additional information please visit:
www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO
Management Engine technologies whitepaper
HP Insight Management HP Service Pack for HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) provide
ProLiant comprehensive approach to firmware and system software maintenance. Together
they provide better operating stability and ensure maximum uptime. The SPP will b
updated at a predictable cadence, typically coinciding with new HP server hardware
launches. By enabling firmware to be updated online and integrating firmware and
system software updates in one operation, HP SUM and the SPP offer faster updates
individual servers and dramatically faster updates of entire BladeSystem enclosures
Further improving system uptime and stability is the fact that HP provides 12 mont
support for each Service Pack for ProLiant release.
The user experience around HP SUM and the SPP has been improved in several
ways, starting with the web download. A single web page provides access to a
single download containing both the latest version of HP SUM and the latest
SPP. Optional smaller subsets with only specific types of servers or specific
operating systems are offered to save on download time. The HP SUM
application provides a straightforward, intuitive user interface that guides the
user through the steps of discovery, analyses and update, providing
comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By providing
the option of multiple local or shared repositories which can be easily updated
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 10
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Standard Features
from hp.com, HP SUM provides the tools to optimize stability and consistency
throughout the company. While HP SUM and the SPP recommend the
combinations of firmware and system software that HP has found to be the
best practice, the application gives customers the flexibility to set their own
specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the highest
quality as well as providing the input for HP SUM to deploy updates taking into
account all interdepencies, when determining the correct updates and order of
update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be
downloaded from www.hp.com/go/spp/download. More information can be
found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp and
http://www.hp.com/go/hpsum
Security Power-on password
QuickLock, Network Server Mode
Serial interface control
Administrator's password
iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption
iLO 4 can be disabled via a Global Setting
iLO Advanced supports directory services integration
Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of H
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from da
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
services are available through HP Care Pack services or customized service agreements. Hard drives have
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day respons
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement
involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 11
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Optional Features
HP Insight management HP Insight Control HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
migrate, monitor, remote control, and optimize your IT infrastructure through a
single, simple management console. For more information, see
http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Upd
Service ensuring rapid access to HP support staff and proactive delivery of
software updates. For more information about this service, see:
http://www.hp.com/services/insight.
HP iLO Advanced HP Integrated Lights-Out Advanced License a product option, providing smart
remote server management without compromise. iLO Advanced unlocks the full
set of remote administration functionality for all HP ProLiant servers by
activating the full Virtual Keyboard Video and Mouse remote console, multi-
user collaboration, console record and replay, GUI-based and scripted virtual
media and virtual folders, and enhanced security and power management
functionality. For more information, see: http://www.hp.com/go/iloadvance
HP iLO Scale-Out The HP iLO Scale-Out license ideal for web/hosting/cloud service providers and High
Performance Computing environments. This license is a specific subset of iLO Advanc
functionality, provides fast remote access through Text Console via SSH, lower
operational cost with Dynamic power capping, and faster time to resolution through
Email-based Alerting and proactive notifications. With this newly designed HP iLO Sca
Out license HPC customers now have a server management package solely design and
priced for their massive data environments. HP iLO Scale-Out is available on all HP
ProLiant Gen8 SL and BL and DL 160 servers. For more information, see:
http://www.hp.com/go/iLO/scale-out
HP Matrix Operating The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers is
Environment integrated command center that helps you instantly adjust to dynamic business dem
This advanced infrastructure management software lets you reduce the cost of comm
data center tasks by up to 40 percent while keeping pace with your changing busines
The HP Matrix OE includes the automated provisioning, optimization, and
recovery management capabilities for HP CloudSystem Matrix, the ideal
platform for private cloud and Infrastructure as a Service (IaaS).
NOTE: For more information, visit: http://www.hp.com/go/matrixoe
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 12
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Optional Features
High Performance Clusters HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are available for this
server. These high-speed InfiniBand and 10 Gigabit interconnects are fully supported b
HP. http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster HP Insight Cluster Management Utility (CMU) is an HP-licensed and HP-
Management Utility supported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported
option to HP Insight CMU, for the development and deployment of applications
on HPC Cluster Platforms. Value Pack includes the Platform LSF workload
scheduler and Platform Application Center, as well as the HP-MPI parallelization
library.
HP Insight Online HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP
support information personalized to your IT environment. Insight Online can automatically display devices
remotely monitored by HP Insight Remote Support. With Insight Online's easy navigation you can efficiently
track your IT support contracts and device status from anywhere and at anytime.
www.hp.com/go/insightonline
Factory Express Portfolio HP Factory Express offers configuration, customization, integration and deployment services for HP servers
and storage products. Customers can choose how their factory solutions are built, tested, integrated,
for Servers and Storage
shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration and
services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP pr
supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP Pro
Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries a
configurable network switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Simple Configurator SCE is a guided self service tool to help sales and non technical people provide customers with initial configuratio
minutes. You may then send the configuration on for configuration help, or use in your existing ordering
processes. If you require "custom" rack configuration or configuration for products not available in SCE,
please contact HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 13
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Service and Support
Service and Support HP Technology Services for SL Server
Capitalizing on capabilities requires a service partner who understands your increasingly complex business
technology environment. That's why it makes sense to team up with the people who know HP infrastructure
hardware and software best - the experienced professionals at HP Services.
What HP SL Services can do for you
HP SL Services can help you design, deploy, test, integrate, support, and manage IT and infrastructure
solutions. This way, HP proposes services solutions that include more than just uplift of base warranty. HP
Services helps deliver high levels of application availability through proactive service management and
advanced technical response
HP Technology Services meets business challenges with recommended services HP support solutions enable
customers to optimize technology operations, minimize risk and drive better business outcomes with easy-
to-buy, easy-to-use scalable support recommendations for servers, storage, networking and software.
Protect your business beyond warranty with HP Care Pack Services: HP Care Pack services provide total care
and support expertise with committed response choices designed to meet your IT and business needs
Recommended Support Supports maintaining servers at optimum performance availability
Solution
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking options
to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
HP Installation and Startup for Insight Control Software / HP SIM
Provides for the deployment and basic configuration of HP Insight Control or HP SIM (Systems Insight
Manager) on HP ProLiant ML and DL series servers or HP BladeSystem servers or HP ProLiant SL servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-9972ENW.pdf
For a Hyperscale Environment, Datacenter Care is our most flexible and comprehensive support offering.
HP works in partnership with our customers to provide end-to-end tailored support for your existing IT
environments while aiding you on your converged cloud journey. It leverages the integrated technology,
people, processes, and partner ecosystem of HP to deploy, help operate, and evolve your data centers on
their journey from traditional data centers to converged cloud. With the ability to configure support tailored
to your needs, we offer you flexibility that is cost effective. Datacenter Care is made from "building blocks"
of services, each tested and delivered globally. These can be combined to deliver the services that you
require, and are monitored and updated to change as your needs change. Start with the core building blocks
of an assigned account service manager, enhanced call handling, proactive and reactive support, and add on
other services that are tailored to your specific needs. Proactive and reactive support are configured to
deliver the level of support needed by the different components in a data center, to meet both SLA and cost
targets.
For SMB to Enterprise customers HP Technology Services meets business challenges with the right services
solution:
Recommended Services 3-Year HP 24x7 4 hour response, Proactive Care Service*
This service gives you combined reactive and proactive support including rapid
access to our Advanced Solution Center to manage and prevent problems and a
Technical Support Specialist with a broad level of technical knowledge that will
engage with additional technical expertise as needed from HP's vast global
resources.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855EEE.pdf
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 14
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Service and Support
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf
Insight Remote Support Provides 24 X 7 remote monitoring, proactive notifications, and problem resolution. Learn more
http://www.hp.com/go/insightremotesupport
HP Support Center Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for live
support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP
Care Pack or HP contractual support agreement.
*HP' Support Center Mobile App is subject to local availability
Warranty / Service For ProLiant servers and storage systems, the services cover HP-branded hardware options qualified for the serv
purchased at the same time or afterward, internal to the enclosure, as well as external monitors up to 22" and tow
Coverage
products; these items will be covered at the same service level and for the same coverage period as the
server unless the maximum supported lifetime and/or the maximum usage limitation has been exceeded.
Coverage of the UPS battery is not included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives that have
not failed. SSD/Flash Drives that are specified by HP as consumable parts and/or that have exceeded
maximum supported lifetime and/or the maximum usage limit as set forth in the manufacturer's operating
manual or the technical data sheet are not eligible for the defective media retention service feature option.
For more information To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/proliant
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 15
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Pre-configured Models
HP ProLiant 3xSL4540 Gen8 Processor(s) (1) Intel Xeon® E5-2470 v2 ( 2.4GHz, 10 core, 25MB, 95W)
1G Mezz HBA Server Servers Includes 3 nodes in 1 chassis
748409-001 Cache Memory 25MB L3 Cache per node
Memory 32GB (4 x 8GB) per node
Network Controller (2) 1Gb Ethernet Ports per node
Storage Controller (1) HP SL4500 H220 Host Bus Adapter per node
Hard Drive None ship standard
Expansion Slot (1) available mezzanine slot per node
Management HP iLO Management Engine
Form Factor 4.3U, comes with .66U spacer blank and rail kit
Power Supply (2) HP 1200W Common Slot Platinum Plus Hot Plug
Warranty 1-1-1
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 16
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
NOTE: Rack chosen is required to have 1200mm to provide space for cable management arm at the rear of the chassis and host PDU in the rea
rack
Step 1: Base Configuration (choose one of the following configurable models)
HP Chassis - 1x60 Model HP ProLiant SL454x 1x Node Chassis 663600-B21
NOTE: Standard 5 dual fan modules included along with chassis.
NOTE: Supports 60 LFF drives. One node total
HP Chassis - 2x25 Model HP ProLiant SL454x 2x Node Chassis 663600-B22
NOTE: Standard 5 dual fan modules included along with chassis.
NOTE: Supports 50 LFF drives with up to 25 per node. Two nodes total
HP Chassis - 3x15 Model HP ProLiant SL454x 3x Node Chassis 663600-B23
NOTE: Standard 5 dual fan modules included along with chassis.
NOTE: Supports 45 LFF drives with up to 15 per node. Three nodes total
HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following power supplies offer up to 94% efficiency.
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit 656363-B21
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit 656364-B21
HP Common Slot Gold Power Supplies
NOTE: The following power supplies offer up to 92% efficiency.
HP 750W Common Slot Gold Hot Plug Power Supply Kit 512327-B21
NOTE: Kits contain optional power supply, an IEC power cable and PDU IEC cables.
HP Rail Kits NOTE: One Rail Kit is required for every chassis in a rack.
HP 4.3U Server Rail Kit 681254-B21
HP 0.66U Spacer Blank Kit 681260-B21
NOTE: A Spacer Blank kit may be ordered to make an even 5U (4.3U+0.66U) spacing in a rack. This
would enable racking of up to 8 chassis in a 42U rack. It is also possible to rack up to 9 chassis in a
42U rack using an additional dense racking option kit. The Spacer Blank kit is not used when the
dense racking option HP 13U FIO Rack Adapter Kit for 3x4.3U Chassis is used
Step 1A: Select Nodes
HP Server Nodes - 1x60 HP ProLiant SL4540 Gen8 Tray 1x Node Server 664644-B21
NOTE: Select quantity of one
model
HP Server Nodes - 2x25 HP ProLiant SL4540 Gen8 Tray 2x Node Server 664644-B22
NOTE: Select quantity of two
model
HP Server Nodes - 3x15 HP ProLiant SL4540 Gen8 Tray 3x Node Server 664644-B23
NOTE: Select quantity of three
model
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 17
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Configuration Information - Factory Integrated Models
Step 2: Choose Required Node Options (only one of the following from each list unless otherwise
noted)
HP Processors NOTE: If 2 processor servers are desired, select one xxxxx-L21 and one xxxxxx-B21for every
processor option chosen per node
E5-2400 v2 Series Processors
Ten-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) FIO Processor Kit 740674-L21
HP SL4540 Gen8 Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) FIO Processor Kit 744134-L21
Eight-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) FIO Processor Kit 740695-L21
HP SL4540 Gen8 Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) FIO Processor Kit 740677-L21
Six-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W) FIO Processor Kit 740680-L21
HP SL4540 Gen8 Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) FIO Processor Kit 740689-L21
HP SL4540 Gen8 Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) FIO Processor Kit 740693-L21
Four-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) FIO Processor Kit 740691-L21
E5-2400 series Processors
Eight-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) FIO Processor Kit 730777-L21
HP SL4540 Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) FIO Processor Kit 684373-L21
Six-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) FIO Processor Kit 728427-L21
HP SL4540 Gen8 Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) FIO Processor Kit 684379-L21
HP SL4540 Gen8 Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) FIO Processor Kit 686169-L21
HP SL4540 Gen8 Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) FIO Processor Kit 684376-L21
Quad-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) FIO Processor Kit 686166-L21
HP Memory NOTE: Please choose memory options for the first processor of each server node. Up to 6 DDR3
DIMM slots are dedicated per processor socket.
NOTE: HP memory from previous generation servers are not qualified or warranted with this HP
ProLiant Server. HP SmartMemory is required to realize the memory performance improvements
and enhanced functionality listed in this document for Gen8. For additional information, please see
the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: HP certified SmartMemory must be used to guarantee full 1333MHz speeds.
NOTE: Depending on the memory configuration and processor model, the memory speed may
run at 1600, 1333MHz or 1066MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator
Registered DIMMs (RDIMM) - For E5-2400 v2 Series Processors
NOTE: The Following memory is supported by E5-2400 v2 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage 713981-B21
Memory Kit
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 18
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Configuration Information - Factory Integrated Models
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage 731765-B21
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage 713983-B21
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage 713985-B21
Memory Kit
HP 32GB (1x16GB) Dual Rank x4 PC3L-10600L (DDR3-1333) Registered CAS-9 Low Voltage 647903-B21
Memory Kit
Registered DIMMs (RDIMM) - For E5-2400 Series Processors
NOTE: The Following memory is supported by E5-2400 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage 647893-B21
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647897-B21
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage 647901-B21
Memory Kit
HP 32GB (1x16GB) Dual Rank x4 PC3L-10600L (DDR3-1333) Registered CAS-9 Low Voltage 647903-B21
Memory Kit
NOTE: A maximum of 12 DDR3 based memory slots are available on the node tray.
HP I/O Module NOTE: At least one I/O module must be selected per node. The HP ProLiant SL454x 1G FIO Module
Kit supports two (2) embedded 1Gb NICs. The HP SL454x 10G FIO Input Output Module Kit supports
two (2) embedded 1Gb NICs and two (2) embedded 10Gb NICs with an optional InfiniBand upgrade.
NOTE: 10 Gb Ethernet on the QSFP port requires the use of the QSFP to SFP+ (QSA) adapter
655874-B21.
NOTE: IB supported with addition of HP IB Enablement Kit
HP SL454x 1G FIO Input Output Module Kit 664647-B21
HP SL454x 10G Input Output Module Kit 664648-B21
NOTE: Quantity of I/O module is 1 for every 1x60 model, 2 for every 2x25 model and 3 for every
3x15 model.
HP Storage Controllers NOTE: Each node can support up to two of the P420i Gen8 storage controllers to manage the LFF
hard drives.
NOTE: Each node can support ONLY one HP SL4500 H220 HBA to manage the LFF hard drives
NOTE: If two P420i Gen8 storage controllers are ordered, the HP SL454x Storage Mezzanine to
PCIe Enablement Kit cannot be ordered
NOTE: A cache module and the 12 inch Supercap kit must be selected per each P420i ordered.
NOTE: Zero Memory cache option is not supported.
Host Bus Adapter
HP SL4500 H220 FIO Host Bus Adapter 740326-B21
Smart Array P420i Controller
HP Smart Array P420i Mezzanine Controller FIO Kit 692276-B21
Options for P420i
NOTE: A cache module and the 12 inch Supercap kit must be selected per each P420i ordered
NOTE: Zero Memory cache option is not supported
HP 12in Super Capacity Option for Smart Array 668943-B21
HP 1GB P-series Smart Array Flash Backed Write Cache 631679-B21
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 19
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Configuration Information - Factory Integrated Models
HP 2GB P-series Smart Array Flash Backed Write Cache 631681-B21
Step 3: Choose Additional Factory Integratable Options (only one of the following from each list
unless otherwise noted)
Rack Adapter HP 13U FIO Rack Adapter Kit for 3X4.3U Chassis 681677-B21
NOTE: Densely groups three SL4540 chassis into a 13U tall space. Order one per three chassis. The
0.66U spacer is not used when selecting this option.
HP Insight Software HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO License
C6N36A
Step 4: Choose Additional Options for Factory Integration
PCI Riser HP SL454x Storage Mezzanine to PCIe Enablement Kit 682632-B21
NOTE: Needed to enable Low Profile PCIe Slot in the I/O module. Required for ordering
any additional PCI Express cards for adding one of the expansion options such as HP IO
accelerator, networking options or external storage controller options
NOTE: If two p420i Gen8 storage controllers are ordered, the HP SL454x Storage Mezzanine to
PCIe Enablement Kit cannot be ordered
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 20
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an
HP approved configurator. Contact your local sales representative for additional information.
HP Processors NOTE: Please choose Processor options for the second processor of each server node.
E5-2400 v2 Series Processors
Ten-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2470v2 (2.4GHz/10-core/25MB/95W) Processor Kit 740674-B21
HP SL4540 Gen8 Intel® Xeon® E5-2450Lv2 (1.7GHz/10-core/25MB/60W) Processor Kit 744134-B21
Eight-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2450v2 (2.5GHz/8-core/20MB/95W) Processor Kit 740695-B21
HP SL4540 Gen8 Intel® Xeon® E5-2440v2 (1.9GHz/8-core/20MB/95W) Processor Kit 740677-B21
Six-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2430v2 (2.5GHz/6-core/15MB/80W) Processor Kit 740680-B21
HP SL4540 Gen8 Intel® Xeon® E5-2430Lv2 (2.4GHz/6-core/15MB/60W) Processor Kit 740689-B21
HP SL4540 Gen8 Intel® Xeon® E5-2420v2 (2.2GHz/6-core/15MB/80W) Processor Kit 740693-B21
Four-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2407v2 (2.4GHz/4-core/10MB/80W) Processor Kit 740691-B21
E5-2400 Series Processors
Eight-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2450 (2.1GHz/8-core/20MB/95W) Processor Kit 730777-B21
HP SL4540 Gen8 Intel® Xeon® E5-2470 (2.3GHz/8-core/20MB/95W) Processor Kit 684373-B21
Six-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2420 (1.9GHz/6-core/15MB/95W) Processor Kit 728427-B21
HP SL4540 Gen8 Intel® Xeon® E5-2430 (2.2GHz/6-core/15MB/95W) Processor Kit 684379-B21
HP SL4540 Gen8 Intel® Xeon® E5-2430L (2.0GHz/6-core/15MB/60W) Processor Kit 686169-B21
HP SL4540 Gen8 Intel® Xeon® E5-2440 (2.4GHz/6-core/15MB/95W) Processor Kit 684376-B21
Quad-Core Processors
HP SL4540 Gen8 Intel® Xeon® E5-2407 (2.2GHz/4-core/10MB/80W) Processor Kit 686166-B21
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 21
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
HP Memory NOTE: Please choose memory options for the second processor of each node. Up to 6 DDR3 DIMM
slots are dedicated per socket.
NOTE: HP SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen8. For additional information, please see the
HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: HP certified SmartMemory must be used to guarantee full 1333MHz speeds.
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 1600, 1333MHz or 1066MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
Registered DIMMs (RDIMM) - For E5-2400 v2 Series Processors
NOTE: The Following memory is supported by E5-2400 v2 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory
713981-B21
Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory
731765-B21
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory
713983-B21
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage 713985-B21
Memory Kit
HP 32GB (1x32GB) Dual Rank x4 PC3L-14900R (DDR3-1600) Registered CAS-11 Low Voltage 708643-B21
Memory Kit
Registered DIMMs (RDIMM) - For E5-2400 Series Processors
NOTE: The Following memory is supported by E5-2400 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647893-B21
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
647897-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647901-B21
Kit
HP 32GB (1x32GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647903-B21
Kit
HP Hard Drives NOTE: For the 1x60 model, choose up to a total of 60 LFF 3.5" hard drives from the following
options using any mix of SAS/SATA/SSD hard drives for desired performance and up to a total of 2
SFF 2.5" hard drives from the following options for OS, boot or additional storage purposes.
NOTE: For the 2x25 model, choose up to a total of 25 LFF 3.5" hard drives per server node from
the following options using any mix of SAS/SATA/SSD hard drives for desired performance and up
to a total of 2 SFF 2.5" hard drives per server node from the following options for OS, boot or
additional storage purposes.
NOTE: For the 3x15 model, choose up to a total of 15 LFF 3.5" hard drives per server node from
the following options using any mix of SAS/SATA/SSD hard drives for desired performance and up
to a total of 2 SFF 2.5" hard drives per server node from the following options for OS, boot or
additional storage purposes.
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components for the subsystem.
NOTE: Hard drives have either a one year or three year warranty.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 22
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
SAS Hot Plug SmartDrive LFF (3.5-inch) Enterprise Drives
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive 765424-B21
HP 600GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive 652620-B21
HP 450GB 6G SAS 15K rpm LFF (3.5-inch) SC Enterprise 3yr Warranty Hard Drive 652615-B21
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline Drives
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 761477-B21
HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 695510-B21
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 652766-B21
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 652757-B21
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 652753-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive 655710-B21
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive 655708-B21
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline (MDL) Drives
HP 6TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 753874-B21
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 693687-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 628061-B21
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 658079-B21
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 657750-B21
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 658071-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
6G SATA Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
HP 800GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive 718189-B21
HP 600GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive 739900-B21
HP 480GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive 718183-B21
HP 300GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive 739890-B21
HP 240GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive 718177-B21
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid691868-B21
State Drive
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid691866-B21
State Drive
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid691864-B21
State Drive
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid691862-B21
State Drive
6G SATA ME Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty Solid691860-B21
State Drive
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 23
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
HP 400GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty Solid691856-B21
State Drive
HP 200GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty Solid691854-B21
State Drive
HP 100GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise Mainstream 3yr Wty Solid691852-B21
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/14038_na/14038_na.html
12G SAS Value Endurance Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
HP 800GB 12G SAS VE 3.5in SCC EV SSD 762270-B21
HP 1.6TB 12G SAS VE 3.5in SCC EV SSD 762272-B21
12G SAS Value Endurance Hot Plug LFF (2.5-inch) Enterprise Value Solid State Drives
HP 800GB 12G SAS VE 2.5in SC EV SSD 762261-B21
HP 1.6TB 12G SAS VE 2.5in SC EV SSD 762263-B21
NOTE: 12G SAS SSDs operate at 6G when deployed in SL4540 Gen8.
HP Networking Gigabit Ethernet Adapters
HP NC365T 4-port Ethernet Server Adapter 593722-B21
HP Ethernet 1Gb 4-port 331T Adapter 647594-B21
10 Gigabit Ethernet adapters
HP Ethernet 10Gb 2-port 530SFP Adapter 652503-B21
HP Ethernet 10Gb 2-port 530T Adapter 656596-B21
HP Ethernet 10Gb 2-port 560SFP+ Adapter 665249-B21
HP Ethernet 10Gb 2-port 561T Adapter 716591-B21
NOTE: Need to order HP SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile
PCIe slot.
NOTE: These are additional expansion options and only one may be selected per server
node.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs
Optical Adapters HP BladeSystem c-Class 10Gb Short Range Small Form-Factor Pluggable Option 455883-B21
HP BladeSystem c-Class 10Gb Long Range Small Form-Factor Pluggable Option 455886-B21
HP BLc VC 1GB SFP RJ-45 Module 453156-001
HP BLc Virtual Connect 1Gb RJ-45 Small Form Factor Pluggable Option Kit 453154-B21
HP BLc Virtual Connect 1Gb SX Small Form Factor Pluggable Option Kit 453151-B21
HP X132 10G SFP+ LC SR Transceiver J9150A
HP X132 10G SFP+ LC LR Transceiver J9151A
HP QSFP/SFP+ Adapter Kit 655874-B21
NOTE: The adaptors listed will function with single mode fiber cable designed to fit in an
SFP/SFP+ transceiver
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 24
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
SFP+ Direct Attach Cables 0.5M 10GbE BLc DAC SFP+ 487649-B21 /
487559-001
1M 10GbE BLc DAC SFP+ 487652-B21 /
487654-001
3M 10GbE BLc DAC SFP+ 487655-B21 /
487657-001
7M 10GbE BLc DAC SFP+ 487658-B21 /
487660-001
HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable J9281B
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C
HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283B
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
HP X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable J9285B
NOTE: 10 Gb Ethernet on the QSFP port requires the use of the QSFP to SFP+ adaptor (P/N 655874-
B21)
HP InfiniBand HP InfiniBand Enablement Kit 614841-B21
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
Infiniband Cables NOTE: Infiniband supported with addition of HP IB Enablement Kit (P/N 614841-B21)
HP 1M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Copper Cable 498385-B21
HP 2M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Copper Cable 498385-B22
HP 3M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Copper Cable 498385-B23
HP 5M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Copper Cable 498385-B24
HP 3M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Optical Cable 498386-B23
HP 5M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Optical Cable 498386-B24
HP 10M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Optical Cable 498386-B25
HP 15M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Optical Cable 498386-B26
HP 20M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Optical Cable 498386-B27
HP 30M 4X DDR/QDR Quad Small Form Factor Pluggable InfiniBand Optical Cable 498386-B28
NOTE: FDR and FDR-10 not supported.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 25
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Core Options
HP Power Supplies NOTE: Prior to making a power supply selection it is highly recommended that the HP
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at: www.hp.com/go/hppoweradvisor.
HP Common Slot Platinum Plus Power Supply Kits
NOTE: The following Power Supplies offer 94% efficiency with support for Intelligent Power
Discovery
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit 656363-B21
HP 750W Common Slot Platinum Plus Hot Plug Power Supply Kit 636673-B21
HP 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit 656364-B21
HP Common Slot Gold Power Supplies
NOTE: The following power supplies offer up to 92% efficiency.
HP 750W Common Slot Gold Hot Plug Power Supply Kit 512327-B21
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC cables.
NOTE: Power Specification and Technical Content for supported power supplies can be
found at: http://h18000.www1.hp.com/products/quickspecs/14209_na/14209_na.html
HP Common Slot -48VDC Power Supplies
HP 750W Common Slot -48VDC Hot Plug Power Supply Kit 636673-B21
NOTE: The HP 750W Common Slot -48VDC power supply does not ship with a power cable. It has
been designed with a terminal block connection allowing for custom design of power
cords by the user to select an alternative power cord for your server, please review the
HP Common Slot Power Supplies QuickSpecs.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 26
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
HP SL Advanced Power The SL Advanced Power Manager is an optional rack level solution for the HP ProLiant SL4540 and
SL4545 which enables server-level DC (or hardware) power on and off and server-level monitoring.
Manager
In addition, the SL APM will automatically discover SL hardware components which are
connected into the SL APM solution.
The SL APM does not replace rack PDUs, but is designed to enable the utilization of
basic, low cost, rack PDUs while providing the functionality of 'switched' PDUs (which
provide hardware power on/off of individual servers by turning off the AC power to the
power supplies of a given server). Because the SL servers share power supplies to
optimize power efficiency, using 'switched' PDUs to turn off all the power supplies in
the chassis will result in the loss of all server nodes in that chassis. The SL APM solves
this by allowing server node-level hardware power on/off of the DC power to the
individual server node motherboards.
HP SL Advanced Power Manager Kit 538084-B21
HP SL Advanced Power Manager Distribution Module Kit 620002-B21
HP Insight Software HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server License C6N27A
HP Insight Control Server Provisioning Media Kit BD883A
HP Insight Management Media Kit C6N31A
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Integrated Lights-Out (iLO)
HP iLO Scale-Out
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates Flex Qty E-LTU
BD776AAE
HP Integrated Lights-Out Scale-Out 3yr 24x7 Tech Support and Updates Flex Quantity License BD776A
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates Tracking License
BD777A
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates Flex Qty E-LTU
BD778AAE
HP Integrated Lights-Out Scale-Out 1yr 24x7 Tech Support and Updates Flex Quantity License BD778A
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates Tracking License
BD779A
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single set of activation keys.
NOTE: For additional license options please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out (iLO) Advanced for ProLiant
HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single Server License 512485-B21
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Eight Server License 512489-B21
HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates BD505A
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 27
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
NOTE: For additional license options please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/14276_na/14276_na.html
NOTE: For more information, visit: http://www.hp.com/go/ilo.
High Performance Clusters HP Cluster Management Utility
HP Insight Cluster Management Utility 1yr 24x7 Flexible License QL803B
HP Insight Cluster Management Utility 3yr 24x7 Flexible License BD476A
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order
to obtain a license key. Customer also will receive a support agreement.
HP Insight Cluster Management Utility Media BD477A
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html
HP I/O Accelerator Options Second Generation Accelerators
HP 365GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers 673642-B21
HP 785GB Multi Level Cell G2 PCIe ioDrive2 for ProLiant Servers 673644-B21
NOTE: Need to order HP SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile
PCIe slot.
NOTE: These are additional expansion options and only one may be selected per server
node.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13587_na/13587_na.html
HP PCIe Workload Mainstream Endurance (ME) PCIe Workload Accelerators
Accelerator Options HP 1.4TB HH/HL Mainstream Endurance (ME) PCIe Workload Accelerator 729307-B21
HP 700GB HH/HL Mainstream Endurance (ME) PCIe Workload Accelerator 729305-B21
High Endurance (HE) PCIe Workload Accelerators
HP 700GB HH/HL High Endurance (HE) PCIe Workload Accelerator 708090-B21
HP 350GB HH/HL High Endurance (HE) PCIe Workload Accelerator 708088-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14528_na/14528_na.html
HP Security HP Trusted Platform Module Option 488069-B21
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts
used to authenticate the server platform. These artifacts can include passwords, certificates and
encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data
and to ensure that a server running Windows Server 2008 has not been tampered with while the
system was offline. For more information about TPM, including a white paper, go to:
www.hp.com/go/TPM.
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 28
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
HP Storage Controllers SAS Controllers
Smart Array P421 Controller
HP Smart Array P421/1GB FBWC 6Gb 2-ports Ext SAS Controller 631673-B21
HP Smart Array P421/2GB FBWC 6Gb 2-ports Ext SAS Controller 631674-B21
Smart Array P431/4G Controller
HP Smart Array P431/4GB FBWC 6Gb 2-ports Ext SAS Controller 698532-B21
Optional Upgrades
HP 12in Super Capacity Option for Smart Array 668943-B21
NOTE: The HP 12in Super Cap is a required option to implement a HP Smart Array Controller with
Flash.
HP 1GB P-series Smart Array Flash Backed Write Cache 631679-B21
HP 2GB P-series Smart Array Flash Backed Write Cache 631681-B21
HP SmartCache No Media 24x7 Technical Support 1 Svr License D7S26A
HP SmartCache No Media 24x7 Technical Support Flexible License D7S27A
HP SmartCache No Media 24x7 Technical Support Electronic License D7S27AAE
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14229_na/14229_na.html
(Smart Array P421 Controller)
http://h18000.www1.hp.com/products/quickspecs/14532_na/14532_na.html
(SmartCache)
Host Bus Adapter
HP H221 PCIe 3.0 SAS Host Bus Adapter 729552-B21
NOTE: Need to order HP SL454x Storage Mezzanine to PCIe Enablement Kit to enable the low profile
PCIe slot.
NOTE: These are additional expansion options and only one may be selected per server
node.
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18004.www1.hp.com/products/quickspecs/14337_na/14337_na.html
(HBA 222)
HP Power Cords NOTE: HP ProLiant servers ships with an IEC-IEC power cord used for rack mounting with
Power Distribution Units (PDUs).
HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord A0K03A
HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord A0K04A
HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord A0K02A
HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord A0K06A
HP C13 - Nema 6-15P US 250V 15A JP 3.6m Power Cord A0N33A
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord AF556A
HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord AF573A
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 29
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
HP Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media see:
http://www.hp.com/go/tape. For hardware and software compatibility of HP tape backup
products see: http://www.hp.com/storage/SPOCK
HP LTO Ultrium Half-Height Tape Drives
HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit C0L99A
HP StoreEver 1/8 G2 Tape Autoloader
HP StoreEver 1/8 G2 LTO-6 Ultrium 6250 SAS Tape Autoloader C0H18A
HP StoreEver MSL6480
HP StoreEver MSL6480 Scalable Base Module QU625A
HP Tape Storage Systems HP StoreEver MSL6480
HP StoreEver MSL6480 Scalable Base Module QU625A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14604_na/14604_na.html
HP Disk Storage Systems Disk Enclosures
HP D2600 w/12 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 48TB Bundle E7W32A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13404_na/13404_na.html
HP Uninterruptible Power HP Rack-mountable UPS
Systems HP R1500 G3 Uninterruptible Power Supply (UPS)
HP R1.5kVA G3 1U NA Uninterruptible Power System AF469A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14059_na/14059_na.html
HP R/T3000 G2 Uninterruptible Power System (UPS)
HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System AF466A
HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System AF467A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14058_na/14058_na.html
R5000 Uninterruptible Power System (UPS)
HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System AF460A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14109_na/14109_na.html
R7000 Uninterruptible Power System (UPS)
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System AF462A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14110_na/14110_na.html
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
www.hp.com/servers/rackups.
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com.
NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 30
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
will list cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords.
HP Basic Power HP Basic Power Distribution Unit: 1U/0U Version
Distribution Units (bPDU) HP 1.9kVA 120 Volt L5-20 Input (12xNEMA 5-20R) NA/JP Basic PDU H5M54A
HP 3.6kVA 200-240 Volt Detachable C20 Input ( 12xC13) WW Basic PDU H5M56A
HP Basic Power Distribution Unit: Half Height Version
HP 2.8kVA 120 Volt L5-30 Input (18xNEMA 5-20R) NA/JP Basic PDU H5M55A
HP 3.6kVA 200-240 Volt Detachable C20 Input (18xC13) WW Basic PDU H5M57A
HP 4.9kVA 208 Volt L6-30 Input (20xC13) NA/JP Basic PDU H5M58A
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13) NA/JP Basic PDU H5M61A
HP Basic Power Distribution Unit: Mid Height Version
HP 4.9kVA 208 Volt L6-30 Input (24xC13/6xC19) NA/JP Basic PDU H5M59A
HP 8.3kVA 208 Volt CS8265C Input (30xC13/6xC19) NA/JP Basic PDU H5M60A
HP Hardwired 200-240 Volt Input (30xC13/6xC19) WW Basic PDU H5M75A
HP 5.7kVA 208 Volt L21-20 3-Phase Input (24xC13/3xNEMA 5-20R) NA/JP Basic PDU H5M63A
HP 8.6kVA 208 Volt L21-30 3-Phase Input (24xC13/3xC19/3xNEMA 5-20R) NA/JP Basic PDU H5M64A
HP 8.6kVA 208 Volt L15-30 3-Phase Input (24xC13/6xC19) NA/JP Basic PDU H5M62A
HP Basic Power Distribution Unit: Full Height Version
HP 11kVA 400 Volt IEC309 30A 3-Phase Input (36xC13/6xC19) NA Basic PDU H5M67A
HP Basic Power Distribution Unit: 480/277 Volt Version
HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU H3X07A
HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU H3X08A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/14557_na/14557_na.html54
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower
HP Remote Monitoring HP Remote Monitored Power Distribution Unit: 1U Version
Power Distribution Units HP 2.8kVA 120 Volt L5-30 Input (12xNEMA 5-20R)NA/JP Monitored PDU D9N43A
(mPDU)
HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU D9N46A
HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU D9N44A
HP Remote Monitored Power Distribution Unit: Half Height Version
HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU D9N45A
HP Remote Monitored Power Distribution Unit: Mid Height Version
HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU D9N47A
HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU D9N51A
HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored PDU D9N52A
HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP Monitored PDU D9N53A
HP Remote Monitored Power Distribution Unit: Full Height Version
HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU D9N49A
HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU D9N58A
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU D9N61A
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 31
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU D9N54A
HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU D9N59A
HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU D9N62A
HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU D9N63A
HP Environmental Sensor for Remote Monitored PDUs
HP Environmental Sensor for Remote Monitored PDUs E2D53A
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/14669_na/14669_na.html
HP Intelligent Power iPDU Core Units
Distribution Units (iPDU) HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit AF520A
HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit AF521A
HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit AF522A
HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit AF533A
HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit AF523A
HP 17.3kVA 24A 415V Three Phase L22-30 NA Core Intelligent Power Distribution Unit AF902A
HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit AF535A
HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit AF537A
iPDU Kits with Standard Extension Bars
HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit AF531A
HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit AF532A
iPDU Extension Bars
HP 5xC13 Intelligent PDU Extension Bar G2 Kit AF547A
HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar AF528A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13650_na/13650_na.html
NOTE: Additional HP Power Distribution Units are available. For a complete list of all HP
PDUs and additional information please visit: www.hp.com/go/rackandpower.
HP Rack Series HP Intelligent Rack Series
HP 636 1200mm Pallet Intelligent Series Rack BW899A
HP 636 1200mm Shock Intelligent Series Rack BW900A
HP 642 1200mm Pallet Intelligent Series Rack BW907A
HP 642 1200mm Shock Intelligent Series Rack BW908A
HP 647 1200mm Pallet Intelligent Series Rack BW913A
HP 647 1200mm Shock Intelligent Series Rack BW914A
NOTE: Rack chosen is required to have a depth of 1200mm to provide space for cable management
arm at the rear of the chassis and host PDU in the rear of the rack.
NOTE: Please see the QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/14223_na/14223_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
http://www.hp.com/go/rackandpower.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 32
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
HP Rack Options HP TFT7600 G2 KVM Console and Monitor (TFT7600 G2)
HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor AZ870A
HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor AZ885A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch AF616A
HP Server Console 0x2x16 Port Analog Switch AF617A
HP TAA 0x2x16xKVM Server Console G2 Switch AF626A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software AF619A
HP KVM CAT5 1-pack USB Interface Adapter 336047-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch AF611A
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software AF620A
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software AF621A
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software AF622A
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
HP Care Pack Services Server Care Packs
HP 3 year Next business day SL454X Gen8 Tray 1x Node Hardware Support U7K40E
HP 3 year Next business day Defective Media Retension SL454X Gen8 Tray 1x Node Hardware U7K41E
Support
HP 3 year Next business day SL454X Gen8 Tray 1x Node Proactive Service U7K42E
HP 3 year Next business day Defective Media Retension SL454X Gen8 Tray 1x Node Proactive U7K43E
Service
HP 3 year 4 hour 13x5 SL454X Gen8 Tray 1x Node Hardware Support U7K44E
HP 3 year 4 hour 13x5 with Defective Media Retension SL454X Gen8 Tray 1x Node Hardware Support
U7K45E
HP 3 year 4 hour 24x7 SL454X Gen8 Tray 1x Node Hardware Support U7K48E
HP 3 year 4 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Node Hardware Support U7K49E
HP 3 year 4 hour 24x7 SL454X Gen8 Tray 1x Node Proactive Service U7K50E
HP 3 year 4 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Node Proactive Service U7K51E
HP 3 year 24 hour 24x7 Call to Repair SL454X Gen8 Tray 1x Node Hardware Support U7K54E
HP 3 year 24 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Node Hardware Support U7K55E
HP 3 year 6 hour 24x7 Call to Repair SL454X Gen8 Tray 1x Node Hardware Support U7K56E
HP 3 year 6 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Node Hardware Support U7K57E
HP 3 year 6 hour 24x7 SL454X Gen8 Tray 1x Node Call to Repair Proactive Service U7K58E
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 33
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Additional Options
HP 3 year 6 hour 24x7 Defective Media Retension SL454X Gen8 Tray 1x Call to Repair Proactive U7K59E
Service
Enclosure Care Packs
HP 3 year Next business day SL454x 1 Node Chassis Hardware Support U7J55E
HP 3 year Next business day Defective Media Retension SL454x 1 Node Chassis Hardware Support U7J56E
HP 3 year Next business day SL454x 1 Node Chassis Proactive Service U7J57E
HP 3 year Next business day Defective Media Retension SL454x 1 Node Chassis Proactive Service U7J58E
HP 3 year 4 hour 13x5 SL454x 1 Node Chassis Hardware Support U7J59E
HP 3 year 4 hour 13x5 with Defective Media Retension SL454x 1 Node Chassis Hardware Support U7J60E
HP 3 year 4 hour 24x7 SL454x 1 Node Chassis Hardware Support U7J63E
HP 3 year 4 hour 24x7 Defective Media Retension SL454x 1 Node Chassis Hardware Support U7J64E
HP 3 year 4 hour 24x7 SL454x 1 Node Chassis Proactive Service U7J65E
HP 3 year 4 hour 24x7 Defective Media Retension SL454x 1 Node Chassis Proactive Service U7J66E
HP 3 year 24 hour 24x7 Call to Repair SL454x 1 Node Chassis Hardware Support U7J69E
HP 3 year 24 hour 24x7 Defective Media Retension SL454x 1 Node Chassis Hardware Support U7J70E
HP 3 year 6 hour 24x7 Call to Repair SL454x 1 Node Chassis Hardware Support U7J71E
HP 3 year6 hour 24x7 Defective Media Retension SL454x 1 Node Chassis Hardware Support U7J72E
HP 3 year 6 hour 24x7 SL454x 1 Node Chassis Call to Repair Proactive Service U7J73E
HP 3 year 6 hour24x7 Defective Media Retension SL454x1 Node Chassis Call to Repair Proactive U7J74E
Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
Cloudera Care Packs
Cloudera Ent Basic Ed 1yr 24x7 Phys Lic G7M27A
Cloudera Ent Basic Ed 1yr 24x7 E-LTU G7M27AAE
Cloudera Ent Basic Ed 1yr 8x5 Phys Lic G7M28A
Cloudera Ent Basic Ed 1yr 8x5 E-LTU G7M28AAE
Cloudera EDH Ed 1yr 24x7 Phys Lic G7M29A
Cloudera EDH Ed 1yr 24x7 E-LTU G7M29AAE
Cloudera EDH Ed 1yr 8x5 Phys Lic G7M30A
Cloudera EDH Ed 1yr 8x5 E-LTU G7M30AAE
Cloudera EDH Ed 1yr 24x7 Premium E-LTU G7M31AAE
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 34
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Memory
HP ProLiant SL4540 (Gen8) server
NOTE: Chart does not represent all possible memory configurations.
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memor
configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-2400 family processor socket contains three memory channels that support two DIMMs each for a total of six (6) DIMM p
processor or a grand total of twelve (12) DIMMs for the server. Up to 32GB capacity DIMMs are supported for 384GB of memory (12 DIMM slots
DIMM).
DIMM slot and configuration diagrams
Memory population guidelines
General Memory Population Rules and Guidelines:
Light DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate light slots only.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors and to load
the channels similarly whenever possible.
Populate DIMMs from heaviest load (dual-rank) to lightest load (single-rank) within a channel. Heaviest load (DIMM with most
ranks) within a channel goes furthest from the processor
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not qualified on the SL4540 Gen8 Server. Certain HP SmartMemory features such as me
authentication and enhanced performance may not be supported.
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional information,
please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 35
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Memory
DIMM Type Registered DIMMS for E5-2400 v2 Series Processors
(RDIMMs)
DIMM Rank Single Rank (1R) Dual Rank (2R)
DIMM Capacity 4GB 8GB 8GB 32GB
DIMM Native Speed (MHz) 1600 1600 1600 1600
Voltage LV LV LV LV
SLOTS THAT CAN BE POPULATED
12 slot server nodes 12 12 12 12
MAXIMUM CAPACITY (GB)* 48 96 96 384
1 DIMM Per Channel 1600 1600 1600 1600
2 DIMM Per Channel 1600 1600 1600 1600
NOTE: Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
NOTE: Capacity references are rounded to the common Gigabyte values:
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
32GB = 32768MB
DIMM Type Registered DIMMS for E5-2400 Series Processors
(RDIMMs)
DIMM Rank Single Rank (1R) Dual Rank (2R)
DIMM Capacity 4GB 8GB 32GB
DIMM Native Speed (MHz) 1333 1333 1333
Voltage LV LV LV
SLOTS THAT CAN BE POPULATED
12 slot server nodes 12 12 12
MAXIMUM CAPACITY (GB)* 48 96 384
1 DIMM Per Channel 1333 1333 1333
2 DIMM Per Channel 1333 1333 1333
NOTE: Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
NOTE: Capacity references are rounded to the common Gigabyte values:
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
32GB = 32768MB
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 36
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Memory
DDR3 memory options part number decoder
Following are memory options available from HP:
HP Memory NOTE: Please choose memory options for socket 2 of each server node. Up to 6DDR3 DIMM slots
dedicated per socket.
NOTE: HP SmartMemory is required to realize the memory performance improvements and
enhanced functionality listed in this document for Gen8. For additional information, please see the HP
SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_na/14225_na.html
NOTE: HP certified SmartMemory must be used to guarantee full 1333MHz speeds.
NOTE: Depending on the memory configuration and processor model, the memory speed may run
at 1600MHz, 1333MHz or 1066MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
Registered DIMMs (RDIMM) - For E5-2400 v2 Series Processors
NOTE: The Following memory is supported by E5-2400 v2 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory 713981-B21
Kit
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory 731765-B21
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage Memory 713983-B21
Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage 713985-B21
Memory Kit
HP 32GB (1x32GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory 647903-B21
Kit
Registered DIMMs (RDIMM) - For E5-2400 Series Processors
NOTE: The Following memory is supported by E5-2400 series processors
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647893-B21
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory Kit
647897-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647901-B21
Kit
HP 32GB (1x32GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage Memory
647903-B21
Kit
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 37
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Storage
1x60 Model
1-2 2 x SFF SATA/SATA SDD Hot Plug Hard Drive Bays
1-30 30 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays
Controller Port 1i
1-30 30 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays
Controller Port 2i
NOTE: This is simple drive zoning
NOTE: Requires second P420i FIO option
Maximum Storage Capacity - 1x60 Model
Internal 2TB (2 x 1TB SATA SFF)
(2 SFF Drive Cage)
Internal 360TB (60 x 6TB SATA LFF)
(60 LFF Drive Cage)
Total 362TB
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 38
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Storage
2x25 Model
1-2 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for
server node 1
1-2 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for
server node 2
1-25 25 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays for
server node 1
1-25 25 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays for
server node 2
NOTE: This is simple drive zoning
NOTE: Requires second P420i FIO option
Maximum Storage Capacity - 2x25 Model
Internal 4TB (4 x 1TB SATA SFF)
(2 SFF Drive Cage)
Internal 300TB (50 x 6TB SATA LFF)
(50 LFF Drive Cage)
Total 304TB
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 39
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Storage
3x15 Model
1-2 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for
server node 1
1-2 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for
server node 2
1-2 2 x SFF SATA/SATA SDD Hot Plug SFF Hard Drive Bays for
server node 3
1-15 15 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays for
server node 1
1-15 15 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays for
server node 2
1-15 15 x LFF SATA/SAS/SDD Hot Plug Hard Drive Bays for
server node 3
NOTE: This is simple drive zoning
NOTE: Requires second P420i FIO option
Maximum Storage Capacity - 3x15 Model
Internal 6TB (6 x 1TB SATA SFF)
(2 SFF Drive Cage)
Internal 270TB (45 x 4TB SATA LFF)
(50 LFF Drive Cage)
Total 276TB
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 40
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Technical Specifications
System Unit Chassis Dimensions 7.47 x 17.45 x 35.34in (18.96 x 44.33 x 89.97cm)
NOTE: Rack chosen is required to have 1200mm depth to provide space for cable management
(H x W x D) Add fan
extension kit arm at the rear of the chassis and host PDU in the rear of the rack.)
(with bezel)
Weight Maximum 220lb (99.8kg)
(all hard drives, power
(approximate)
supply, and processor
installed)
Input Requirements Rated Line Voltage 100 to 120 VAC
200 to 240 VAC
(per power supply)
Rated Input Current For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)
For 750 W Power Supply:
8.9 A (at 100 VAC),
4.3 A (at 200 VAC)
Rated Input Frequency 50 to 60 Hz
Rated Input Power For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)
For 750 W Power Supply:
857 W (at 100 VAC),
824 W (at 200 VAC)
Power Supply Output Rated Steady-State For 1200 W Power Supply:
Power 800 W (at 100 VAC),
(per power supply)
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
Maximum Peak Power For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
Power Specifications To review typical system power ratings use the HP Power Advisor which is available via
the online tool located at URL:
www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor.
Power Supply Output Rated Steady-State Power
(per power supply)
System Inlet Operating 50° to 95° F (10° to 35° C) at sea level with an altitude derating of 1.8°F
per every 1000 ft (1.0°C per every 304.8 m) above sea level to a
Temperature
maximum of 10,000 ft (3048 m), no direct sustained sunlight. Maximum
rate of change is 18°F/hr (10°C/hr). The upper limit may be limited by the
type and number of options installed.
System performance may be reduced if operating with a fan fault or
above 86°F (30°C).
Non-operating -22° to 140° F (-30° to 60° C)
Maximum rate of change is 36°F/hr (20°C/hr).
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 41
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Technical Specifications
Relative Humidity Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb
temperature, non-condensing.
(non-condensing)
Non-operating 5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb
temperature, non-condensing.
Altitude Operating 10,000 ft (3048 m). This value may be limited by the type and number of
options installed. Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating 30,000 ft (9144 m). Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Acoustic Noise Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C amb
environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declar
in accordance with ISO 9296 (ECMA 109).
Idle
L WAd 7.27 B
L pAm 58.93 dBA
Operating
L WAd 7.27 B
L pAm 59.00 dBA
Emissions FCC Rating Class A
Classification (EMC) Normative Standards CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is eligible to bear
the appropriate compliance logos and statements.
HP Ethernet 1Gb 2-port Network Interface 10Base-T/100Base-TX/1000Base-TX
361i Adapter Compatibility IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
IEEE 1588, IEEE 802.1AS
IEEE 802.3az - Energy Efficient Ethernet (EEE)
Data Transfer Method PCI Express v 2.1, 5.0 GT/s and 2.5 GT/s bus speeds and supports for x1, x2, x4 links width
(Lanes)
Controller I350 Powerville
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s per port, 20 Mb/s Combined
10Base-T (Full-Duplex) 20 Mb/s per port, 40 Mb/S Combined
100Base-TX (Half-Duplex) 100 Mb/s per port, 200 Mb/s Combined
100Base-TX (Full-Duplex) 200 Mb/s per port, 400 Mb/s Combined
1000Base-TX (Half and Full- 1000Mb/s per port, 2000 Mb/s Combined
Duplex)
Connector RJ-45
Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m)
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 42
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Technical Specifications
HP Ethernet 10Gb 2-port Data Transfer Method Compliant to x8 PCIe Gen2 Specification
544i SFP Adapter Network Transfer Rate X4 IB: 10 Gb/s (SDR), 20 Gb/s (DDR), 40Gb/s (QDR)
10Gb/s Ethernet: Full-duplex single lane XFI
Connector QSFP - IB
SFP+ - 10Gb/s Ethernet.
Cable Support IB: HP copper and optical IB NOTE: IB supported with addition of HP IB
cables. Enablement Kit
10Gb/s: HP copper and optical
SFP+ cables
HP Smart Array P420i Dimensions Embedded
Controller Disk Drive and Enclosure 6Gb/s SAS (Serial Attached SCSI)
Interface - Transfer rate 6Gb/s SATA (Serial ATA)
SAS Connectors 2 internal 4X connectors
Cache Memory Speed 1GB or 2GB FBWC DDR3-1333MHz with 72-bit wide bus
Server Interface x8 PCIe 3.0 operating at PCI 2.0
SAS Speed (8) 6Gb/s SAS links provide 4.8GB/s maximum bandwidth
Cache Memory 72-bit 1GB FBWC or 72-bit 2GB FBWC
Logical Drives Supported Up to 64 logical drives with cache
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support RAID 6, 60 (Advanced Data Guarding)
RAID 5, 50 (Distributed Data Guarding)
NOTE: A minimum of 512 MB cache is required to enable RAID 5, 50, 6, 60
NOTE: HP Smart Array Advanced Pack (SAAP 2.0) is no longer required to enable RAID
6 & 60 (Advanced Data Guarding). However, controller must be in firmware version 4.68
(or later).
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping), RAID 1 (Mirroring)
Environment-friendly End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
Products and Approach and Recycling
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 43
QuickSpecs HP ProLiant SL4540 Generation 8 (Gen8) Server
Technical Specifications
© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Unix is a registered trademark of The Open Group.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 14406 U.S. QuickSpecs — Version 20 — 8/18/2014 Page 44